1. Using schema properties to configure custom resources

Custom resources offer a flexible way to manage and fine-tune the operation of Strimzi components using configuration properties. This reference guide describes common configuration properties that apply to multiple custom resources, as well as the configuration properties available for each custom resource schema available with Strimzi. Where appropriate, expanded descriptions of properties and examples of how they are configured are provided.

The properties defined for each schema provide a structured and organized way to specify configuration for the custom resources. Whether it’s adjusting resource allocation or specifying access controls, the properties in the schemas allow for a granular level of configuration. For example, you can use the properties of the KafkaClusterSpec schema to specify the type of storage for a Kafka cluster or add listeners that provide secure access to Kafka brokers.

Some property options within a schema may be constrained, as indicated in the property descriptions. These constraints define specific options or limitations on the values that can be assigned to those properties. Constraints ensure that the custom resources are configured with valid and appropriate values.

2. Common configuration properties

Use Common configuration properties to configure Strimzi custom resources. You add common configuration properties to a custom resource like any other supported configuration for that resource.

2.1. replicas

Use the replicas property to configure replicas.

The type of replication depends on the resource.

  • KafkaTopic uses a replication factor to configure the number of replicas of each partition within a Kafka cluster.

  • Kafka components use replicas to configure the number of pods in a deployment to provide better availability and scalability.

Note
 When running a Kafka component on Kubernetes it may not be necessary to run multiple replicas for high availability. When the node where the component is deployed crashes, Kubernetes will automatically reschedule the Kafka component pod to a different node. However, running Kafka components with multiple replicas can provide faster failover times as the other nodes will be up and running.

2.2. bootstrapServers

Use the bootstrapServers property to configure a list of bootstrap servers.

The bootstrap server lists can refer to Kafka clusters that are not deployed in the same Kubernetes cluster. They can also refer to a Kafka cluster not deployed by Strimzi.

If on the same Kubernetes cluster, each list must ideally contain the Kafka cluster bootstrap service which is named CLUSTER-NAME-kafka-bootstrap and a port number. If deployed by Strimzi but on different Kubernetes clusters, the list content depends on the approach used for exposing the clusters (routes, ingress, nodeports or loadbalancers).

When using Kafka with a Kafka cluster not managed by Strimzi, you can specify the bootstrap servers list according to the configuration of the given cluster.

2.3. ssl (supported TLS versions and cipher suites)

You can incorporate SSL configuration and cipher suite specifications to further secure TLS-based communication between your client application and a Kafka cluster. In addition to the standard TLS configuration, you can specify a supported TLS version and enable cipher suites in the configuration for the Kafka broker. You can also add the configuration to your clients if you wish to limit the TLS versions and cipher suites they use. The configuration on the client must only use protocols and cipher suites that are enabled on the broker.

A cipher suite is a set of security mechanisms for secure connection and data transfer. For example, the cipher suite TLS_AES_256_GCM_SHA384 is composed of the following mechanisms, which are used in conjunction with the TLS protocol:

  • AES (Advanced Encryption Standard) encryption (256-bit key)

  • GCM (Galois/Counter Mode) authenticated encryption

  • SHA384 (Secure Hash Algorithm) data integrity protection

The combination is encapsulated in the TLS_AES_256_GCM_SHA384 cipher suite specification.

The ssl.enabled.protocols property specifies the available TLS versions that can be used for secure communication between the cluster and its clients. The ssl.protocol property sets the default TLS version for all connections, and it must be chosen from the enabled protocols. Use the ssl.endpoint.identification.algorithm property to enable or disable hostname verification.

Example SSL configuration
# ...
config:
  ssl.cipher.suites: TLS_AES_256_GCM_SHA384, TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 # (1)
  ssl.enabled.protocols: TLSv1.3, TLSv1.2 # (2)
  ssl.protocol: TLSv1.3 # (3)
  ssl.endpoint.identification.algorithm: HTTPS # (4)
# ...

  1. Cipher suite specifications enabled.

  2. TLS versions supported.

  3. Default TLS version is TLSv1.3. If a client only supports TLSv1.2, it can still connect to the broker and communicate using that supported version, and vice versa if the configuration is on the client and the broker only supports TLSv1.2.

  4. Hostname verification is enabled by setting to HTTPS. An empty string disables the verification.

2.4. trustedCertificates

Having set tls to configure TLS encryption, use the trustedCertificates property to provide a list of secrets with key names under which the certificates are stored in X.509 format.

You can use the secrets created by the Cluster Operator for the Kafka cluster, or you can create your own TLS certificate file, then create a Secret from the file:

kubectl create secret generic MY-SECRET \
--from-file=MY-TLS-CERTIFICATE-FILE.crt
Example TLS encryption configuration
tls:
  trustedCertificates:
    - secretName: my-cluster-cluster-cert
      certificate: ca.crt
    - secretName: my-cluster-cluster-cert
      certificate: ca2.crt

If certificates are stored in the same secret, it can be listed multiple times.

If you want to enable TLS encryption, but use the default set of public certification authorities shipped with Java, you can specify trustedCertificates as an empty array:

Example of enabling TLS with the default Java certificates
tls:
  trustedCertificates: []

For information on configuring mTLS authentication, see the KafkaClientAuthenticationTls schema reference.

2.5. resources

Configure resource requests and limits to control resources for Strimzi containers. You can specify requests and limits for memory and cpu resources. The requests should be enough to ensure a stable performance of Kafka.

How you configure resources in a production environment depends on a number of factors. For example, applications are likely to be sharing resources in your Kubernetes cluster.

For Kafka, the following aspects of a deployment can impact the resources you need:

  • Throughput and size of messages

  • The number of network threads handling messages

  • The number of producers and consumers

  • The number of topics and partitions

The values specified for resource requests are reserved and always available to the container. Resource limits specify the maximum resources that can be consumed by a given container. The amount between the request and limit is not reserved and might not be always available. A container can use the resources up to the limit only when they are available. Resource limits are temporary and can be reallocated.

Resource requests and limits

Boundaries of a resource requests and limits

If you set limits without requests or vice versa, Kubernetes uses the same value for both. Setting equal requests and limits for resources guarantees quality of service, as Kubernetes will not kill containers unless they exceed their limits.

You can configure resource requests and limits for one or more supported resources.

Example resource configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    #...
    resources:
      requests:
        memory: 64Gi
        cpu: "8"
      limits:
        memory: 64Gi
        cpu: "12"
  entityOperator:
    #...
    topicOperator:
      #...
      resources:
        requests:
          memory: 512Mi
          cpu: "1"
        limits:
          memory: 512Mi
          cpu: "1"

Resource requests and limits for the Topic Operator and User Operator are set in the Kafka resource.

If the resource request is for more than the available free resources in the Kubernetes cluster, the pod is not scheduled.

Note
 Strimzi uses the Kubernetes syntax for specifying memory and cpu resources. For more information about managing computing resources on Kubernetes, see Managing Compute Resources for Containers.
Memory resources

When configuring memory resources, consider the total requirements of the components.

Kafka runs inside a JVM and uses an operating system page cache to store message data before writing to disk. The memory request for Kafka should fit the JVM heap and page cache. You can configure the jvmOptions property to control the minimum and maximum heap size.

Other components don’t rely on the page cache. You can configure memory resources without configuring the jvmOptions to control the heap size.

Memory requests and limits are specified in megabytes, gigabytes, mebibytes, and gibibytes. Use the following suffixes in the specification:

  • M for megabytes

  • G for gigabytes

  • Mi for mebibytes

  • Gi for gibibytes

Example resources using different memory units
# ...
resources:
  requests:
    memory: 512Mi
  limits:
    memory: 2Gi
# ...

For more details about memory specification and additional supported units, see Meaning of memory.

CPU resources

A CPU request should be enough to give a reliable performance at any time. CPU requests and limits are specified as cores or millicpus/millicores.

CPU cores are specified as integers (5 CPU core) or decimals (2.5 CPU core). 1000 millicores is the same as 1 CPU core.

Example CPU units
# ...
resources:
  requests:
    cpu: 500m
  limits:
    cpu: 2.5
# ...

The computing power of 1 CPU core may differ depending on the platform where Kubernetes is deployed.

For more information on CPU specification, see Meaning of CPU.

2.6. image

Use the image property to configure the container image used by the component.

Overriding container images is recommended only in special situations where you need to use a different container registry or a customized image.

For example, if your network does not allow access to the container repository used by Strimzi, you can copy the Strimzi images or build them from the source. However, if the configured image is not compatible with Strimzi images, it might not work properly.

A copy of the container image might also be customized and used for debugging.

You can specify which container image to use for a component using the image property in the following resources:

  • Kafka.spec.kafka

  • Kafka.spec.zookeeper

  • Kafka.spec.entityOperator.topicOperator

  • Kafka.spec.entityOperator.userOperator

  • Kafka.spec.entityOperator.tlsSidecar

  • KafkaConnect.spec

  • KafkaMirrorMaker.spec

  • KafkaMirrorMaker2.spec

  • KafkaBridge.spec

Configuring the image property for Kafka, Kafka Connect, and Kafka MirrorMaker

Kafka, Kafka Connect, and Kafka MirrorMaker support multiple versions of Kafka. Each component requires its own image. The default images for the different Kafka versions are configured in the following environment variables:

  • STRIMZI_KAFKA_IMAGES

  • STRIMZI_KAFKA_CONNECT_IMAGES

  • STRIMZI_KAFKA_MIRROR_MAKER_IMAGES

These environment variables contain mappings between the Kafka versions and their corresponding images. The mappings are used together with the image and version properties:

  • If neither image nor version are given in the custom resource then the version will default to the Cluster Operator’s default Kafka version, and the image will be the one corresponding to this version in the environment variable.

  • If image is given but version is not, then the given image is used and the version is assumed to be the Cluster Operator’s default Kafka version.

  • If version is given but image is not, then the image that corresponds to the given version in the environment variable is used.

  • If both version and image are given, then the given image is used. The image is assumed to contain a Kafka image with the given version.

The image and version for the different components can be configured in the following properties:

  • For Kafka in spec.kafka.image and spec.kafka.version.

  • For Kafka Connect and Kafka MirrorMaker in spec.image and spec.version.

Warning
 It is recommended to provide only the version and leave the image property unspecified. This reduces the chance of making a mistake when configuring the custom resource. If you need to change the images used for different versions of Kafka, it is preferable to configure the Cluster Operator’s environment variables.

Configuring the image property in other resources

For the image property in the other custom resources, the given value will be used during deployment. If the image property is missing, the image specified in the Cluster Operator configuration will be used. If the image name is not defined in the Cluster Operator configuration, then the default value will be used.

  • For Topic Operator:

    1. Container image specified in the STRIMZI_DEFAULT_TOPIC_OPERATOR_IMAGE environment variable from the Cluster Operator configuration.

    2. quay.io/strimzi/operator:0.36.0 container image.

  • For User Operator:

    1. Container image specified in the STRIMZI_DEFAULT_USER_OPERATOR_IMAGE environment variable from the Cluster Operator configuration.

    2. quay.io/strimzi/operator:0.36.0 container image.

  • For Entity Operator TLS sidecar:

    1. Container image specified in the STRIMZI_DEFAULT_TLS_SIDECAR_ENTITY_OPERATOR_IMAGE environment variable from the Cluster Operator configuration.

    2. quay.io/strimzi/kafka:0.36.0-kafka-3.5.0 container image.

  • For Kafka Exporter:

    1. Container image specified in the STRIMZI_DEFAULT_KAFKA_EXPORTER_IMAGE environment variable from the Cluster Operator configuration.

    2. quay.io/strimzi/kafka:0.36.0-kafka-3.5.0 container image.

  • For Kafka Bridge:

    1. Container image specified in the STRIMZI_DEFAULT_KAFKA_BRIDGE_IMAGE environment variable from the Cluster Operator configuration.

    2. quay.io/strimzi/kafka-bridge:0.26.0 container image.

  • For Kafka broker initializer:

    1. Container image specified in the STRIMZI_DEFAULT_KAFKA_INIT_IMAGE environment variable from the Cluster Operator configuration.

    2. quay.io/strimzi/operator:0.36.0 container image.

Example container image configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    image: my-org/my-image:latest
    # ...
  zookeeper:
    # ...

2.7. livenessProbe and readinessProbe healthchecks

Use the livenessProbe and readinessProbe properties to configure healthcheck probes supported in Strimzi.

Healthchecks are periodical tests which verify the health of an application. When a Healthcheck probe fails, Kubernetes assumes that the application is not healthy and attempts to fix it.

For more details about the probes, see Configure Liveness and Readiness Probes.

Both livenessProbe and readinessProbe support the following options:

  • initialDelaySeconds

  • timeoutSeconds

  • periodSeconds

  • successThreshold

  • failureThreshold

Example of liveness and readiness probe configuration
# ...
readinessProbe:
  initialDelaySeconds: 15
  timeoutSeconds: 5
livenessProbe:
  initialDelaySeconds: 15
  timeoutSeconds: 5
# ...

For more information about the livenessProbe and readinessProbe options, see the Probe schema reference.

2.8. metricsConfig

Use the metricsConfig property to enable and configure Prometheus metrics.

The metricsConfig property contains a reference to a ConfigMap that has additional configurations for the Prometheus JMX Exporter. Strimzi supports Prometheus metrics using Prometheus JMX exporter to convert the JMX metrics supported by Apache Kafka and ZooKeeper to Prometheus metrics.

To enable Prometheus metrics export without further configuration, you can reference a ConfigMap containing an empty file under metricsConfig.valueFrom.configMapKeyRef.key. When referencing an empty file, all metrics are exposed as long as they have not been renamed.

Example ConfigMap with metrics configuration for Kafka
kind: ConfigMap
apiVersion: v1
metadata:
  name: my-configmap
data:
  my-key: |
    lowercaseOutputName: true
    rules:
    # Special cases and very specific rules
    - pattern: kafka.server<type=(.+), name=(.+), clientId=(.+), topic=(.+), partition=(.*)><>Value
      name: kafka_server_$1_$2
      type: GAUGE
      labels:
       clientId: "$3"
       topic: "$4"
       partition: "$5"
    # further configuration
Example metrics configuration for Kafka
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    metricsConfig:
      type: jmxPrometheusExporter
      valueFrom:
        configMapKeyRef:
          name: my-config-map
          key: my-key
    # ...
  zookeeper:
    # ...

When metrics are enabled, they are exposed on port 9404.

When the metricsConfig (or deprecated metrics) property is not defined in the resource, the Prometheus metrics are disabled.

For more information about setting up and deploying Prometheus and Grafana, see Introducing Metrics to Kafka.

2.9. jvmOptions

The following Strimzi components run inside a Java Virtual Machine (JVM):

  • Apache Kafka

  • Apache ZooKeeper

  • Apache Kafka Connect

  • Apache Kafka MirrorMaker

  • Strimzi Kafka Bridge

To optimize their performance on different platforms and architectures, you configure the jvmOptions property in the following resources:

  • Kafka.spec.kafka

  • Kafka.spec.zookeeper

  • Kafka.spec.entityOperator.userOperator

  • Kafka.spec.entityOperator.topicOperator

  • Kafka.spec.cruiseControl

  • KafkaNodePool.spec

  • KafkaConnect.spec

  • KafkaMirrorMaker.spec

  • KafkaMirrorMaker2.spec

  • KafkaBridge.spec

You can specify the following options in your configuration:

-Xms

Minimum initial allocation heap size when the JVM starts

-Xmx

Maximum heap size

-XX

Advanced runtime options for the JVM

javaSystemProperties

Additional system properties

gcLoggingEnabled

Enables garbage collector logging

Note
 The units accepted by JVM settings, such as -Xmx and -Xms, are the same units accepted by the JDK java binary in the corresponding image. Therefore, 1g or 1G means 1,073,741,824 bytes, and Gi is not a valid unit suffix. This is different from the units used for memory requests and limits, which follow the Kubernetes convention where 1G means 1,000,000,000 bytes, and 1Gi means 1,073,741,824 bytes.
-Xms and -Xmx options

In addition to setting memory request and limit values for your containers, you can use the -Xms and -Xmx JVM options to set specific heap sizes for your JVM. Use the -Xms option to set an initial heap size and the -Xmx option to set a maximum heap size.

Specify heap size to have more control over the memory allocated to your JVM. Heap sizes should make the best use of a container’s memory limit (and request) without exceeding it. Heap size and any other memory requirements need to fit within a specified memory limit. If you don’t specify heap size in your configuration, but you configure a memory resource limit (and request), the Cluster Operator imposes default heap sizes automatically. The Cluster Operator sets default maximum and minimum heap values based on a percentage of the memory resource configuration.

The following table shows the default heap values.

Table 1. Default heap settings for components
Component Percent of available memory allocated to the heap Maximum limit

Kafka

50%

5 GB

ZooKeeper

75%

2 GB

Kafka Connect

75%

None

MirrorMaker 2

75%

None

MirrorMaker

75%

None

Cruise Control

75%

None

Kafka Bridge

50%

31 Gi

If a memory limit (and request) is not specified, a JVM’s minimum heap size is set to 128M. The JVM’s maximum heap size is not defined to allow the memory to increase as needed. This is ideal for single node environments in test and development.

Setting an appropriate memory request can prevent the following:

  • Kubernetes killing a container if there is pressure on memory from other pods running on the node.

  • Kubernetes scheduling a container to a node with insufficient memory. If -Xms is set to -Xmx, the container will crash immediately; if not, the container will crash at a later time.

In this example, the JVM uses 2 GiB (=2,147,483,648 bytes) for its heap. Total JVM memory usage can be a lot more than the maximum heap size.

Example -Xmx and -Xms configuration
# ...
jvmOptions:
  "-Xmx": "2g"
  "-Xms": "2g"
# ...

Setting the same value for initial (-Xms) and maximum (-Xmx) heap sizes avoids the JVM having to allocate memory after startup, at the cost of possibly allocating more heap than is really needed.

Important
 Containers performing lots of disk I/O, such as Kafka broker containers, require available memory for use as an operating system page cache. For such containers, the requested memory should be significantly higher than the memory used by the JVM.
-XX option

-XX options are used to configure the KAFKA_JVM_PERFORMANCE_OPTS option of Apache Kafka.

Example -XX configuration
jvmOptions:
  "-XX":
    "UseG1GC": true
    "MaxGCPauseMillis": 20
    "InitiatingHeapOccupancyPercent": 35
    "ExplicitGCInvokesConcurrent": true
JVM options resulting from the -XX configuration
-XX:+UseG1GC -XX:MaxGCPauseMillis=20 -XX:InitiatingHeapOccupancyPercent=35 -XX:+ExplicitGCInvokesConcurrent -XX:-UseParNewGC
Note
 When no -XX options are specified, the default Apache Kafka configuration of KAFKA_JVM_PERFORMANCE_OPTS is used.
javaSystemProperties

javaSystemProperties are used to configure additional Java system properties, such as debugging utilities.

Example javaSystemProperties configuration
jvmOptions:
  javaSystemProperties:
    - name: javax.net.debug
      value: ssl

For more information about the jvmOptions, see the JvmOptions schema reference.

2.10. Garbage collector logging

The jvmOptions property also allows you to enable and disable garbage collector (GC) logging. GC logging is disabled by default. To enable it, set the gcLoggingEnabled property as follows:

Example GC logging configuration
# ...
jvmOptions:
  gcLoggingEnabled: true
# ...

3. Kafka schema reference

Property Description

spec

The specification of the Kafka and ZooKeeper clusters, and Topic Operator.

KafkaSpec

status

The status of the Kafka and ZooKeeper clusters, and Topic Operator.

KafkaStatus

4. KafkaSpec schema reference

Used in: Kafka

Property Description

kafka

Configuration of the Kafka cluster.

KafkaClusterSpec

zookeeper

Configuration of the ZooKeeper cluster.

ZookeeperClusterSpec

entityOperator

Configuration of the Entity Operator.

EntityOperatorSpec

clusterCa

Configuration of the cluster certificate authority.

CertificateAuthority

clientsCa

Configuration of the clients certificate authority.

CertificateAuthority

cruiseControl

Configuration for Cruise Control deployment. Deploys a Cruise Control instance when specified.

CruiseControlSpec

jmxTrans

The jmxTrans property has been deprecated. JMXTrans is deprecated and related resources removed in Strimzi 0.35.0. As of Strimzi 0.35.0, JMXTrans is not supported anymore and this option is ignored.

JmxTransSpec

kafkaExporter

Configuration of the Kafka Exporter. Kafka Exporter can provide additional metrics, for example lag of consumer group at topic/partition.

KafkaExporterSpec

maintenanceTimeWindows

A list of time windows for maintenance tasks (that is, certificates renewal). Each time window is defined by a cron expression.

string array

5. KafkaClusterSpec schema reference

Used in: KafkaSpec

Full list of KafkaClusterSpec schema properties

Configures a Kafka cluster.

5.1. listeners

Use the listeners property to configure listeners to provide access to Kafka brokers.

Example configuration of a plain (unencrypted) listener without authentication
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
spec:
  kafka:
    # ...
    listeners:
      - name: plain
        port: 9092
        type: internal
        tls: false
    # ...
  zookeeper:
    # ...

5.2. config

Use the config properties to configure Kafka broker options as keys.

The values can be one of the following JSON types:

  • String

  • Number

  • Boolean

Exceptions

You can specify and configure the options listed in the Apache Kafka documentation.

However, Strimzi takes care of configuring and managing options related to the following, which cannot be changed:

  • Security (encryption, authentication, and authorization)

  • Listener configuration

  • Broker ID configuration

  • Configuration of log data directories

  • Inter-broker communication

  • ZooKeeper connectivity

Properties with the following prefixes cannot be set:

  • advertised.

  • authorizer.

  • broker.

  • controller

  • cruise.control.metrics.reporter.bootstrap.

  • cruise.control.metrics.topic

  • host.name

  • inter.broker.listener.name

  • listener.

  • listeners.

  • log.dir

  • password.

  • port

  • process.roles

  • sasl.

  • security.

  • servers,node.id

  • ssl.

  • super.user

  • zookeeper.clientCnxnSocket

  • zookeeper.connect

  • zookeeper.set.acl

  • zookeeper.ssl

If the config property contains an option that cannot be changed, it is disregarded, and a warning message is logged to the Cluster Operator log file. All other supported options are forwarded to Kafka, including the following exceptions to the options configured by Strimzi:

  • Any ssl configuration for supported TLS versions and cipher suites

  • Configuration for the zookeeper.connection.timeout.ms property to set the maximum time allowed for establishing a ZooKeeper connection

  • Cruise Control metrics properties:

    • cruise.control.metrics.topic.num.partitions

    • cruise.control.metrics.topic.replication.factor

    • cruise.control.metrics.topic.retention.ms

    • cruise.control.metrics.topic.auto.create.retries

    • cruise.control.metrics.topic.auto.create.timeout.ms

    • cruise.control.metrics.topic.min.insync.replicas

  • Controller properties:

    • controller.quorum.election.backoff.max.ms

    • controller.quorum.election.timeout.ms

    • controller.quorum.fetch.timeout.ms

Example Kafka broker configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    config:
      num.partitions: 1
      num.recovery.threads.per.data.dir: 1
      default.replication.factor: 3
      offsets.topic.replication.factor: 3
      transaction.state.log.replication.factor: 3
      transaction.state.log.min.isr: 1
      log.retention.hours: 168
      log.segment.bytes: 1073741824
      log.retention.check.interval.ms: 300000
      num.network.threads: 3
      num.io.threads: 8
      socket.send.buffer.bytes: 102400
      socket.receive.buffer.bytes: 102400
      socket.request.max.bytes: 104857600
      group.initial.rebalance.delay.ms: 0
      zookeeper.connection.timeout.ms: 6000
    # ...

5.3. brokerRackInitImage

When rack awareness is enabled, Kafka broker pods use init container to collect the labels from the Kubernetes cluster nodes. The container image used for this container can be configured using the brokerRackInitImage property. When the brokerRackInitImage field is missing, the following images are used in order of priority:

  1. Container image specified in STRIMZI_DEFAULT_KAFKA_INIT_IMAGE environment variable in the Cluster Operator configuration.

  2. quay.io/strimzi/operator:0.36.0 container image.

Example brokerRackInitImage configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    rack:
      topologyKey: topology.kubernetes.io/zone
    brokerRackInitImage: my-org/my-image:latest
    # ...
Note
 Overriding container images is recommended only in special situations, where you need to use a different container registry. For example, because your network does not allow access to the container registry used by Strimzi. In this case, you should either copy the Strimzi images or build them from the source. If the configured image is not compatible with Strimzi images, it might not work properly.

5.4. logging

Kafka has its own configurable loggers, which include the following:

  • log4j.logger.org.I0Itec.zkclient.ZkClient

  • log4j.logger.org.apache.zookeeper

  • log4j.logger.kafka

  • log4j.logger.org.apache.kafka

  • log4j.logger.kafka.request.logger

  • log4j.logger.kafka.network.Processor

  • log4j.logger.kafka.server.KafkaApis

  • log4j.logger.kafka.network.RequestChannel$

  • log4j.logger.kafka.controller

  • log4j.logger.kafka.log.LogCleaner

  • log4j.logger.state.change.logger

  • log4j.logger.kafka.authorizer.logger

Kafka uses the Apache log4j logger implementation.

Use the logging property to configure loggers and logger levels.

You can set the log levels by specifying the logger and level directly (inline) or use a custom (external) ConfigMap. If a ConfigMap is used, you set logging.valueFrom.configMapKeyRef.name property to the name of the ConfigMap containing the external logging configuration. Inside the ConfigMap, the logging configuration is described using log4j.properties. Both logging.valueFrom.configMapKeyRef.name and logging.valueFrom.configMapKeyRef.key properties are mandatory. A ConfigMap using the exact logging configuration specified is created with the custom resource when the Cluster Operator is running, then recreated after each reconciliation. If you do not specify a custom ConfigMap, default logging settings are used. If a specific logger value is not set, upper-level logger settings are inherited for that logger. For more information about log levels, see Apache logging services.

Here we see examples of inline and external logging. The inline logging specifies the root logger level. You can also set log levels for specific classes or loggers by adding them to the loggers property.

Inline logging
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
spec:
  # ...
  kafka:
    # ...
    logging:
      type: inline
      loggers:
        kafka.root.logger.level: INFO
        log4j.logger.kafka.coordinator.transaction: TRACE
        log4j.logger.kafka.log.LogCleanerManager: DEBUG
        log4j.logger.kafka.request.logger: DEBUG
        log4j.logger.io.strimzi.kafka.oauth: DEBUG
        log4j.logger.org.openpolicyagents.kafka.OpaAuthorizer: DEBUG
  # ...
Note
 Setting a log level to DEBUG may result in a large amount of log output and may have performance implications.
External logging
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
spec:
  # ...
  logging:
    type: external
    valueFrom:
      configMapKeyRef:
        name: customConfigMap
        key: kafka-log4j.properties
  # ...

Any available loggers that are not configured have their level set to OFF.

If Kafka was deployed using the Cluster Operator, changes to Kafka logging levels are applied dynamically.

If you use external logging, a rolling update is triggered when logging appenders are changed.

Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

5.5. KafkaClusterSpec schema properties

Property Description

version

The kafka broker version. Defaults to 3.5.0. Consult the user documentation to understand the process required to upgrade or downgrade the version.

string

replicas

The number of pods in the cluster.

integer

image

The docker image for the pods. The default value depends on the configured Kafka.spec.kafka.version.

string

listeners

Configures listeners of Kafka brokers.

GenericKafkaListener array

config

Kafka broker config properties with the following prefixes cannot be set: listeners, advertised., broker., listener., host.name, port, inter.broker.listener.name, sasl., ssl., security., password., log.dir, zookeeper.connect, zookeeper.set.acl, zookeeper.ssl, zookeeper.clientCnxnSocket, authorizer., super.user, cruise.control.metrics.topic, cruise.control.metrics.reporter.bootstrap.servers,node.id, process.roles, controller. (with the exception of: zookeeper.connection.timeout.ms, sasl.server.max.receive.size,ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols, ssl.secure.random.implementation,cruise.control.metrics.topic.num.partitions, cruise.control.metrics.topic.replication.factor, cruise.control.metrics.topic.retention.ms,cruise.control.metrics.topic.auto.create.retries, cruise.control.metrics.topic.auto.create.timeout.ms,cruise.control.metrics.topic.min.insync.replicas,controller.quorum.election.backoff.max.ms, controller.quorum.election.timeout.ms, controller.quorum.fetch.timeout.ms).

map

storage

Storage configuration (disk). Cannot be updated. The type depends on the value of the storage.type property within the given object, which must be one of [ephemeral, persistent-claim, jbod].

EphemeralStorage, PersistentClaimStorage, JbodStorage

authorization

Authorization configuration for Kafka brokers. The type depends on the value of the authorization.type property within the given object, which must be one of [simple, opa, keycloak, custom].

KafkaAuthorizationSimple, KafkaAuthorizationOpa, KafkaAuthorizationKeycloak, KafkaAuthorizationCustom

rack

Configuration of the broker.rack broker config.

Rack

brokerRackInitImage

The image of the init container used for initializing the broker.rack.

string

livenessProbe

Pod liveness checking.

Probe

readinessProbe

Pod readiness checking.

Probe

jvmOptions

JVM Options for pods.

JvmOptions

jmxOptions

JMX Options for Kafka brokers.

KafkaJmxOptions

resources

CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.

ResourceRequirements

metricsConfig

Metrics configuration. The type depends on the value of the metricsConfig.type property within the given object, which must be one of [jmxPrometheusExporter].

JmxPrometheusExporterMetrics

logging

Logging configuration for Kafka. The type depends on the value of the logging.type property within the given object, which must be one of [inline, external].

InlineLogging, ExternalLogging

template

Template for Kafka cluster resources. The template allows users to specify how the Kubernetes resources are generated.

KafkaClusterTemplate

6. GenericKafkaListener schema reference

Used in: KafkaClusterSpec

Full list of GenericKafkaListener schema properties

Configures listeners to connect to Kafka brokers within and outside Kubernetes.

You configure the listeners in the Kafka resource.

Example Kafka resource showing listener configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    #...
    listeners:
      - name: plain
        port: 9092
        type: internal
        tls: false
      - name: tls
        port: 9093
        type: internal
        tls: true
        authentication:
          type: tls
      - name: external1
        port: 9094
        type: route
        tls: true
      - name: external2
        port: 9095
        type: ingress
        tls: true
        authentication:
          type: tls
        configuration:
          bootstrap:
            host: bootstrap.myingress.com
          brokers:
          - broker: 0
            host: broker-0.myingress.com
          - broker: 1
            host: broker-1.myingress.com
          - broker: 2
            host: broker-2.myingress.com
    #...

6.1. listeners

You configure Kafka broker listeners using the listeners property in the Kafka resource. Listeners are defined as an array.

Example listener configuration
listeners:
  - name: plain
    port: 9092
    type: internal
    tls: false

The name and port must be unique within the Kafka cluster. The name can be up to 25 characters long, comprising lower-case letters and numbers. Allowed port numbers are 9092 and higher with the exception of ports 9404 and 9999, which are already used for Prometheus and JMX.

By specifying a unique name and port for each listener, you can configure multiple listeners.

6.2. type

The type is set as internal, or for external listeners, as route, loadbalancer, nodeport, ingress or cluster-ip. You can also configure a cluster-ip listener, a type of internal listener you can use to build custom access mechanisms.

internal

You can configure internal listeners with or without encryption using the tls property.

Example internal listener configuration
#...
spec:
  kafka:
    #...
    listeners:
      #...
      - name: plain
        port: 9092
        type: internal
        tls: false
      - name: tls
        port: 9093
        type: internal
        tls: true
        authentication:
          type: tls
    #...
route

Configures an external listener to expose Kafka using OpenShift Routes and the HAProxy router.

A dedicated Route is created for every Kafka broker pod. An additional Route is created to serve as a Kafka bootstrap address. Kafka clients can use these Routes to connect to Kafka on port 443. The client connects on port 443, the default router port, but traffic is then routed to the port you configure, which is 9094 in this example.

Example route listener configuration
#...
spec:
  kafka:
    #...
    listeners:
      #...
      - name: external1
        port: 9094
        type: route
        tls: true
    #...
ingress

Configures an external listener to expose Kafka using Kubernetes Ingress and the Ingress NGINX Controller for Kubernetes.

A dedicated Ingress resource is created for every Kafka broker pod. An additional Ingress resource is created to serve as a Kafka bootstrap address. Kafka clients can use these Ingress resources to connect to Kafka on port 443. The client connects on port 443, the default controller port, but traffic is then routed to the port you configure, which is 9095 in the following example.

You must specify the hostnames used by the bootstrap and per-broker services using GenericKafkaListenerConfigurationBootstrap and GenericKafkaListenerConfigurationBroker properties.

Example ingress listener configuration
#...
spec:
  kafka:
    #...
    listeners:
      #...
      - name: external2
        port: 9095
        type: ingress
        tls: true
        authentication:
          type: tls
        configuration:
          bootstrap:
            host: bootstrap.myingress.com
          brokers:
          - broker: 0
            host: broker-0.myingress.com
          - broker: 1
            host: broker-1.myingress.com
          - broker: 2
            host: broker-2.myingress.com
  #...
Note
 External listeners using Ingress are currently only tested with the Ingress NGINX Controller for Kubernetes.
loadbalancer

Configures an external listener to expose Kafka using a Loadbalancer type Service.

A new loadbalancer service is created for every Kafka broker pod. An additional loadbalancer is created to serve as a Kafka bootstrap address. Loadbalancers listen to the specified port number, which is port 9094 in the following example.

You can use the loadBalancerSourceRanges property to configure source ranges to restrict access to the specified IP addresses.

Example loadbalancer listener configuration
#...
spec:
  kafka:
    #...
    listeners:
      - name: external3
        port: 9094
        type: loadbalancer
        tls: true
        configuration:
          loadBalancerSourceRanges:
            - 10.0.0.0/8
            - 88.208.76.87/32
    #...
nodeport

Configures an external listener to expose Kafka using a NodePort type Service.

Kafka clients connect directly to the nodes of Kubernetes. An additional NodePort type of service is created to serve as a Kafka bootstrap address.

When configuring the advertised addresses for the Kafka broker pods, Strimzi uses the address of the node on which the given pod is running. You can use preferredNodePortAddressType property to configure the first address type checked as the node address.

Example nodeport listener configuration
#...
spec:
  kafka:
    #...
    listeners:
      #...
      - name: external4
        port: 9095
        type: nodeport
        tls: false
        configuration:
          preferredNodePortAddressType: InternalDNS
    #...
Note
 TLS hostname verification is not currently supported when exposing Kafka clusters using node ports.
cluster-ip

Configures an internal listener to expose Kafka using a per-broker ClusterIP type Service.

The listener does not use a headless service and its DNS names to route traffic to Kafka brokers. You can use this type of listener to expose a Kafka cluster when using the headless service is unsuitable. You might use it with a custom access mechanism, such as one that uses a specific Ingress controller or the Kubernetes Gateway API.

A new ClusterIP service is created for each Kafka broker pod. The service is assigned a ClusterIP address to serve as a Kafka bootstrap address with a per-broker port number. For example, you can configure the listener to expose a Kafka cluster over an Nginx Ingress Controller with TCP port configuration.

Example cluster-ip listener configuration
#...
spec:
  kafka:
    #...
    listeners:
      - name: external-cluster-ip
        type: cluster-ip
        tls: false
        port: 9096
    #...

6.3. port

The port number is the port used in the Kafka cluster, which might not be the same port used for access by a client.

  • loadbalancer listeners use the specified port number, as do internal and cluster-ip listeners

  • ingress and route listeners use port 443 for access

  • nodeport listeners use the port number assigned by Kubernetes

For client connection, use the address and port for the bootstrap service of the listener. You can retrieve this from the status of the Kafka resource.

Example command to retrieve the address and port for client connection
kubectl get kafka <kafka_cluster_name> -o=jsonpath='{.status.listeners[?(@.name=="<listener_name>")].bootstrapServers}{"\n"}'
Note
 Listeners cannot be configured to use the ports set aside for interbroker communication (9090 and 9091) and metrics (9404).

6.4. tls

The TLS property is required.

By default, TLS encryption is not enabled. To enable it, set the tls property to true.

For route and ingress type listeners, TLS encryption must be enabled.

6.5. authentication

Authentication for the listener can be specified as:

  • mTLS (tls)

  • SCRAM-SHA-512 (scram-sha-512)

  • Token-based OAuth 2.0 (oauth)

  • Custom (custom)

6.6. networkPolicyPeers

Use networkPolicyPeers to configure network policies that restrict access to a listener at the network level. The following example shows a networkPolicyPeers configuration for a plain and a tls listener.

In the following example:

  • Only application pods matching the labels app: kafka-sasl-consumer and app: kafka-sasl-producer can connect to the plain listener. The application pods must be running in the same namespace as the Kafka broker.

  • Only application pods running in namespaces matching the labels project: myproject and project: myproject2 can connect to the tls listener.

The syntax of the networkPolicyPeers property is the same as the from property in NetworkPolicy resources.

Example network policy configuration
listeners:
  #...
  - name: plain
    port: 9092
    type: internal
    tls: true
    authentication:
      type: scram-sha-512
    networkPolicyPeers:
      - podSelector:
          matchLabels:
            app: kafka-sasl-consumer
      - podSelector:
          matchLabels:
            app: kafka-sasl-producer
  - name: tls
    port: 9093
    type: internal
    tls: true
    authentication:
      type: tls
    networkPolicyPeers:
      - namespaceSelector:
          matchLabels:
            project: myproject
      - namespaceSelector:
          matchLabels:
            project: myproject2
# ...

6.7. GenericKafkaListener schema properties

Property Description

name

Name of the listener. The name will be used to identify the listener and the related Kubernetes objects. The name has to be unique within given a Kafka cluster. The name can consist of lowercase characters and numbers and be up to 11 characters long.

string

port

Port number used by the listener inside Kafka. The port number has to be unique within a given Kafka cluster. Allowed port numbers are 9092 and higher with the exception of ports 9404 and 9999, which are already used for Prometheus and JMX. Depending on the listener type, the port number might not be the same as the port number that connects Kafka clients.

integer

type

Type of the listener. Currently the supported types are internal, route, loadbalancer, nodeport and ingress.

  • internal type exposes Kafka internally only within the Kubernetes cluster.

  • route type uses OpenShift Routes to expose Kafka.

  • loadbalancer type uses LoadBalancer type services to expose Kafka.

  • nodeport type uses NodePort type services to expose Kafka.

  • ingress type uses Kubernetes Nginx Ingress to expose Kafka with TLS passthrough.

  • cluster-ip type uses a per-broker ClusterIP service.

string (one of [ingress, internal, route, loadbalancer, cluster-ip, nodeport])

tls

Enables TLS encryption on the listener. This is a required property.

boolean

authentication

Authentication configuration for this listener. The type depends on the value of the authentication.type property within the given object, which must be one of [tls, scram-sha-512, oauth, custom].

KafkaListenerAuthenticationTls, KafkaListenerAuthenticationScramSha512, KafkaListenerAuthenticationOAuth, KafkaListenerAuthenticationCustom

configuration

Additional listener configuration.

GenericKafkaListenerConfiguration

networkPolicyPeers

List of peers which should be able to connect to this listener. Peers in this list are combined using a logical OR operation. If this field is empty or missing, all connections will be allowed for this listener. If this field is present and contains at least one item, the listener only allows the traffic which matches at least one item in this list. For more information, see the external documentation for networking.k8s.io/v1 networkpolicypeer.

NetworkPolicyPeer array

7. KafkaListenerAuthenticationTls schema reference

Used in: GenericKafkaListener

The type property is a discriminator that distinguishes use of the KafkaListenerAuthenticationTls type from KafkaListenerAuthenticationScramSha512, KafkaListenerAuthenticationOAuth, KafkaListenerAuthenticationCustom. It must have the value tls for the type KafkaListenerAuthenticationTls.

Property Description

type

Must be tls.

string

8. KafkaListenerAuthenticationScramSha512 schema reference

Used in: GenericKafkaListener

The type property is a discriminator that distinguishes use of the KafkaListenerAuthenticationScramSha512 type from KafkaListenerAuthenticationTls, KafkaListenerAuthenticationOAuth, KafkaListenerAuthenticationCustom. It must have the value scram-sha-512 for the type KafkaListenerAuthenticationScramSha512.

Property Description

type

Must be scram-sha-512.

string

9. KafkaListenerAuthenticationOAuth schema reference

Used in: GenericKafkaListener

The type property is a discriminator that distinguishes use of the KafkaListenerAuthenticationOAuth type from KafkaListenerAuthenticationTls, KafkaListenerAuthenticationScramSha512, KafkaListenerAuthenticationCustom. It must have the value oauth for the type KafkaListenerAuthenticationOAuth.

Property Description

accessTokenIsJwt

Configure whether the access token is treated as JWT. This must be set to false if the authorization server returns opaque tokens. Defaults to true.

boolean

checkAccessTokenType

Configure whether the access token type check is performed or not. This should be set to false if the authorization server does not include 'typ' claim in JWT token. Defaults to true.

boolean

checkAudience

Enable or disable audience checking. Audience checks identify the recipients of tokens. If audience checking is enabled, the OAuth Client ID also has to be configured using the clientId property. The Kafka broker will reject tokens that do not have its clientId in their aud (audience) claim.Default value is false.

boolean

checkIssuer

Enable or disable issuer checking. By default issuer is checked using the value configured by validIssuerUri. Default value is true.

boolean

clientAudience

The audience to use when making requests to the authorization server’s token endpoint. Used for inter-broker authentication and for configuring OAuth 2.0 over PLAIN using the clientId and secret method.

string

clientId

OAuth Client ID which the Kafka broker can use to authenticate against the authorization server and use the introspect endpoint URI.

string

clientScope

The scope to use when making requests to the authorization server’s token endpoint. Used for inter-broker authentication and for configuring OAuth 2.0 over PLAIN using the clientId and secret method.

string

clientSecret

Link to Kubernetes Secret containing the OAuth client secret which the Kafka broker can use to authenticate against the authorization server and use the introspect endpoint URI.

GenericSecretSource

connectTimeoutSeconds

The connect timeout in seconds when connecting to authorization server. If not set, the effective connect timeout is 60 seconds.

integer

customClaimCheck

JsonPath filter query to be applied to the JWT token or to the response of the introspection endpoint for additional token validation. Not set by default.

string

disableTlsHostnameVerification

Enable or disable TLS hostname verification. Default value is false.

boolean

enableECDSA

The enableECDSA property has been deprecated. Enable or disable ECDSA support by installing BouncyCastle crypto provider. ECDSA support is always enabled. The BouncyCastle libraries are no longer packaged with Strimzi. Value is ignored.

boolean

enableMetrics

Enable or disable OAuth metrics. Default value is false.

boolean

enableOauthBearer

Enable or disable OAuth authentication over SASL_OAUTHBEARER. Default value is true.

boolean

enablePlain

Enable or disable OAuth authentication over SASL_PLAIN. There is no re-authentication support when this mechanism is used. Default value is false.

boolean

failFast

Enable or disable termination of Kafka broker processes due to potentially recoverable runtime errors during startup. Default value is true.

boolean

fallbackUserNameClaim

The fallback username claim to be used for the user id if the claim specified by userNameClaim is not present. This is useful when client_credentials authentication only results in the client id being provided in another claim. It only takes effect if userNameClaim is set.

string

fallbackUserNamePrefix

The prefix to use with the value of fallbackUserNameClaim to construct the user id. This only takes effect if fallbackUserNameClaim is true, and the value is present for the claim. Mapping usernames and client ids into the same user id space is useful in preventing name collisions.

string

groupsClaim

JsonPath query used to extract groups for the user during authentication. Extracted groups can be used by a custom authorizer. By default no groups are extracted.

string

groupsClaimDelimiter

A delimiter used to parse groups when they are extracted as a single String value rather than a JSON array. Default value is ',' (comma).

string

httpRetries

The maximum number of retries to attempt if an initial HTTP request fails. If not set, the default is to not attempt any retries.

integer

httpRetryPauseMs

The pause to take before retrying a failed HTTP request. If not set, the default is to not pause at all but to immediately repeat a request.

integer

introspectionEndpointUri

URI of the token introspection endpoint which can be used to validate opaque non-JWT tokens.

string

jwksEndpointUri

URI of the JWKS certificate endpoint, which can be used for local JWT validation.

string

jwksExpirySeconds

Configures how often are the JWKS certificates considered valid. The expiry interval has to be at least 60 seconds longer then the refresh interval specified in jwksRefreshSeconds. Defaults to 360 seconds.

integer

jwksIgnoreKeyUse

Flag to ignore the 'use' attribute of key declarations in a JWKS endpoint response. Default value is false.

boolean

jwksMinRefreshPauseSeconds

The minimum pause between two consecutive refreshes. When an unknown signing key is encountered the refresh is scheduled immediately, but will always wait for this minimum pause. Defaults to 1 second.

integer

jwksRefreshSeconds

Configures how often are the JWKS certificates refreshed. The refresh interval has to be at least 60 seconds shorter then the expiry interval specified in jwksExpirySeconds. Defaults to 300 seconds.

integer

maxSecondsWithoutReauthentication

Maximum number of seconds the authenticated session remains valid without re-authentication. This enables Apache Kafka re-authentication feature, and causes sessions to expire when the access token expires. If the access token expires before max time or if max time is reached, the client has to re-authenticate, otherwise the server will drop the connection. Not set by default - the authenticated session does not expire when the access token expires. This option only applies to SASL_OAUTHBEARER authentication mechanism (when enableOauthBearer is true).

integer

readTimeoutSeconds

The read timeout in seconds when connecting to authorization server. If not set, the effective read timeout is 60 seconds.

integer

tlsTrustedCertificates

Trusted certificates for TLS connection to the OAuth server.

CertSecretSource array

tokenEndpointUri

URI of the Token Endpoint to use with SASL_PLAIN mechanism when the client authenticates with clientId and a secret. If set, the client can authenticate over SASL_PLAIN by either setting username to clientId, and setting password to client secret, or by setting username to account username, and password to access token prefixed with $accessToken:. If this option is not set, the password is always interpreted as an access token (without a prefix), and username as the account username (a so called 'no-client-credentials' mode).

string

type

Must be oauth.

string

userInfoEndpointUri

URI of the User Info Endpoint to use as a fallback to obtaining the user id when the Introspection Endpoint does not return information that can be used for the user id.

string

userNameClaim

Name of the claim from the JWT authentication token, Introspection Endpoint response or User Info Endpoint response which will be used to extract the user id. Defaults to sub.

string

validIssuerUri

URI of the token issuer used for authentication.

string

validTokenType

Valid value for the token_type attribute returned by the Introspection Endpoint. No default value, and not checked by default.

string

10. GenericSecretSource schema reference

Used in: KafkaClientAuthenticationOAuth, KafkaListenerAuthenticationCustom, KafkaListenerAuthenticationOAuth

Property Description

key

The key under which the secret value is stored in the Kubernetes Secret.

string

secretName

The name of the Kubernetes Secret containing the secret value.

string

11. CertSecretSource schema reference

Used in: ClientTls, KafkaAuthorizationKeycloak, KafkaAuthorizationOpa, KafkaClientAuthenticationOAuth, KafkaListenerAuthenticationOAuth

Property Description

certificate

The name of the file certificate in the Secret.

string

secretName

The name of the Secret containing the certificate.

string

12. KafkaListenerAuthenticationCustom schema reference

Used in: GenericKafkaListener

Full list of KafkaListenerAuthenticationCustom schema properties

To configure custom authentication, set the type property to custom.

Custom authentication allows for any type of kafka-supported authentication to be used.

Example custom OAuth authentication configuration
spec:
  kafka:
    config:
      principal.builder.class: SimplePrincipal.class
    listeners:
      - name: oauth-bespoke
        port: 9093
        type: internal
        tls: true
        authentication:
          type: custom
          sasl: true
          listenerConfig:
            oauthbearer.sasl.client.callback.handler.class: client.class
            oauthbearer.sasl.server.callback.handler.class: server.class
            oauthbearer.sasl.login.callback.handler.class: login.class
            oauthbearer.connections.max.reauth.ms: 999999999
            sasl.enabled.mechanisms: oauthbearer
            oauthbearer.sasl.jaas.config: |
              org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required ;
          secrets:
            - name: example

A protocol map is generated that uses the sasl and tls values to determine which protocol to map to the listener.

  • SASL = True, TLS = True → SASL_SSL

  • SASL = False, TLS = True → SSL

  • SASL = True, TLS = False → SASL_PLAINTEXT

  • SASL = False, TLS = False → PLAINTEXT

12.1. listenerConfig

Listener configuration specified using listenerConfig is prefixed with listener.name.<listener_name>-<port>. For example, sasl.enabled.mechanisms becomes listener.name.<listener_name>-<port>.sasl.enabled.mechanisms.

12.2. secrets

Secrets are mounted to /opt/kafka/custom-authn-secrets/custom-listener-<listener_name>-<port>/<secret_name> in the Kafka broker nodes' containers.

For example, the mounted secret (example) in the example configuration would be located at /opt/kafka/custom-authn-secrets/custom-listener-oauth-bespoke-9093/example.

12.3. Principal builder

You can set a custom principal builder in the Kafka cluster configuration. However, the principal builder is subject to the following requirements:

  • The specified principal builder class must exist on the image. Before building your own, check if one already exists. You’ll need to rebuild the Strimzi images with the required classes.

  • No other listener is using oauth type authentication. This is because an OAuth listener appends its own principle builder to the Kafka configuration.

  • The specified principal builder is compatible with Strimzi.

Custom principal builders must support peer certificates for authentication, as Strimzi uses these to manage the Kafka cluster.

A custom OAuth principal builder might be identical or very similar to the Strimzi OAuth principal builder.

Note
 Kafka’s default principal builder class supports the building of principals based on the names of peer certificates. The custom principal builder should provide a principal of type user using the name of the SSL peer certificate.

The following example shows a custom principal builder that satisfies the OAuth requirements of Strimzi.

Example principal builder for custom OAuth configuration
public final class CustomKafkaPrincipalBuilder implements KafkaPrincipalBuilder {

    public KafkaPrincipalBuilder() {}

    @Override
    public KafkaPrincipal build(AuthenticationContext context) {
        if (context instanceof SslAuthenticationContext) {
            SSLSession sslSession = ((SslAuthenticationContext) context).session();
            try {
                return new KafkaPrincipal(
                    KafkaPrincipal.USER_TYPE, sslSession.getPeerPrincipal().getName());
            } catch (SSLPeerUnverifiedException e) {
                throw new IllegalArgumentException("Cannot use an unverified peer for authentication", e);
            }
        }

        // Create your own KafkaPrincipal here
        ...
    }
}

12.4. KafkaListenerAuthenticationCustom schema properties

The type property is a discriminator that distinguishes use of the KafkaListenerAuthenticationCustom type from KafkaListenerAuthenticationTls, KafkaListenerAuthenticationScramSha512, KafkaListenerAuthenticationOAuth. It must have the value custom for the type KafkaListenerAuthenticationCustom.

Property Description

listenerConfig

Configuration to be used for a specific listener. All values are prefixed with listener.name.<listener_name>.

map

sasl

Enable or disable SASL on this listener.

boolean

secrets

Secrets to be mounted to /opt/kafka/custom-authn-secrets/custom-listener-<listener_name>-<port>/<secret_name>.

GenericSecretSource array

type

Must be custom.

string

13. GenericKafkaListenerConfiguration schema reference

Used in: GenericKafkaListener

Full list of GenericKafkaListenerConfiguration schema properties

Configuration for Kafka listeners.

13.1. brokerCertChainAndKey

The brokerCertChainAndKey property is only used with listeners that have TLS encryption enabled. You can use the property to provide your own Kafka listener certificates.

Example configuration for a loadbalancer external listener with TLS encryption enabled
listeners:
  #...
  - name: external
    port: 9094
    type: loadbalancer
    tls: true
    authentication:
      type: tls
    configuration:
      brokerCertChainAndKey:
        secretName: my-secret
        certificate: my-listener-certificate.crt
        key: my-listener-key.key
# ...

13.2. externalTrafficPolicy

The externalTrafficPolicy property is used with loadbalancer and nodeport listeners. When exposing Kafka outside of Kubernetes you can choose Local or Cluster. Local avoids hops to other nodes and preserves the client IP, whereas Cluster does neither. The default is Cluster.

13.3. loadBalancerSourceRanges

The loadBalancerSourceRanges property is only used with loadbalancer listeners. When exposing Kafka outside of Kubernetes use source ranges, in addition to labels and annotations, to customize how a service is created.

Example source ranges configured for a loadbalancer listener
listeners:
  #...
  - name: external
    port: 9094
    type: loadbalancer
    tls: false
    configuration:
      externalTrafficPolicy: Local
      loadBalancerSourceRanges:
        - 10.0.0.0/8
        - 88.208.76.87/32
      # ...
# ...

13.4. class

The class property is only used with ingress listeners. You can configure the Ingress class using the class property.

Example of an external listener of type ingress using Ingress class nginx-internal
listeners:
  #...
  - name: external
    port: 9094
    type: ingress
    tls: true
    configuration:
      class: nginx-internal
    # ...
# ...

13.5. preferredNodePortAddressType

The preferredNodePortAddressType property is only used with nodeport listeners.

Use the preferredNodePortAddressType property in your listener configuration to specify the first address type checked as the node address. This property is useful, for example, if your deployment does not have DNS support, or you only want to expose a broker internally through an internal DNS or IP address. If an address of this type is found, it is used. If the preferred address type is not found, Strimzi proceeds through the types in the standard order of priority:

  1. ExternalDNS

  2. ExternalIP

  3. Hostname

  4. InternalDNS

  5. InternalIP

Example of an external listener configured with a preferred node port address type
listeners:
  #...
  - name: external
    port: 9094
    type: nodeport
    tls: false
    configuration:
      preferredNodePortAddressType: InternalDNS
      # ...
# ...

13.6. useServiceDnsDomain

The useServiceDnsDomain property is only used with internal and cluster-ip listeners. It defines whether the fully-qualified DNS names that include the cluster service suffix (usually .cluster.local) are used. With useServiceDnsDomain set as false, the advertised addresses are generated without the service suffix; for example, my-cluster-kafka-0.my-cluster-kafka-brokers.myproject.svc. With useServiceDnsDomain set as true, the advertised addresses are generated with the service suffix; for example, my-cluster-kafka-0.my-cluster-kafka-brokers.myproject.svc.cluster.local. Default is false.

Example of an internal listener configured to use the Service DNS domain
listeners:
  #...
  - name: plain
    port: 9092
    type: internal
    tls: false
    configuration:
      useServiceDnsDomain: true
      # ...
# ...

If your Kubernetes cluster uses a different service suffix than .cluster.local, you can configure the suffix using the KUBERNETES_SERVICE_DNS_DOMAIN environment variable in the Cluster Operator configuration.

13.7. GenericKafkaListenerConfiguration schema properties

Property Description

brokerCertChainAndKey

Reference to the Secret which holds the certificate and private key pair which will be used for this listener. The certificate can optionally contain the whole chain. This field can be used only with listeners with enabled TLS encryption.

CertAndKeySecretSource

externalTrafficPolicy

Specifies whether the service routes external traffic to node-local or cluster-wide endpoints. Cluster may cause a second hop to another node and obscures the client source IP. Local avoids a second hop for LoadBalancer and Nodeport type services and preserves the client source IP (when supported by the infrastructure). If unspecified, Kubernetes will use Cluster as the default.This field can be used only with loadbalancer or nodeport type listener.

string (one of [Local, Cluster])

loadBalancerSourceRanges

A list of CIDR ranges (for example 10.0.0.0/8 or 130.211.204.1/32) from which clients can connect to load balancer type listeners. If supported by the platform, traffic through the loadbalancer is restricted to the specified CIDR ranges. This field is applicable only for loadbalancer type services and is ignored if the cloud provider does not support the feature. This field can be used only with loadbalancer type listener.

string array

bootstrap

Bootstrap configuration.

GenericKafkaListenerConfigurationBootstrap

brokers

Per-broker configurations.

GenericKafkaListenerConfigurationBroker array

ipFamilyPolicy

Specifies the IP Family Policy used by the service. Available options are SingleStack, PreferDualStack and RequireDualStack. SingleStack is for a single IP family. PreferDualStack is for two IP families on dual-stack configured clusters or a single IP family on single-stack clusters. RequireDualStack fails unless there are two IP families on dual-stack configured clusters. If unspecified, Kubernetes will choose the default value based on the service type.

string (one of [RequireDualStack, SingleStack, PreferDualStack])

ipFamilies

Specifies the IP Families used by the service. Available options are IPv4 and IPv6. If unspecified, Kubernetes will choose the default value based on the ipFamilyPolicy setting.

string (one or more of [IPv6, IPv4]) array

createBootstrapService

Whether to create the bootstrap service or not. The bootstrap service is created by default (if not specified differently). This field can be used with the loadBalancer type listener.

boolean

class

Configures a specific class for Ingress and LoadBalancer that defines which controller will be used. This field can only be used with ingress and loadbalancer type listeners. If not specified, the default controller is used. For an ingress listener, set the ingressClassName property in the Ingress resources. For a loadbalancer listener, set the loadBalancerClass property in the Service resources.

string

finalizers

A list of finalizers which will be configured for the LoadBalancer type Services created for this listener. If supported by the platform, the finalizer service.kubernetes.io/load-balancer-cleanup to make sure that the external load balancer is deleted together with the service.For more information, see https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#garbage-collecting-load-balancers. This field can be used only with loadbalancer type listeners.

string array

maxConnectionCreationRate

The maximum connection creation rate we allow in this listener at any time. New connections will be throttled if the limit is reached.

integer

maxConnections

The maximum number of connections we allow for this listener in the broker at any time. New connections are blocked if the limit is reached.

integer

preferredNodePortAddressType

Defines which address type should be used as the node address. Available types are: ExternalDNS, ExternalIP, InternalDNS, InternalIP and Hostname. By default, the addresses will be used in the following order (the first one found will be used):

  • ExternalDNS

  • ExternalIP

  • InternalDNS

  • InternalIP

  • Hostname

This field is used to select the preferred address type, which is checked first. If no address is found for this address type, the other types are checked in the default order. This field can only be used with nodeport type listener.

string (one of [ExternalDNS, ExternalIP, Hostname, InternalIP, InternalDNS])

useServiceDnsDomain

Configures whether the Kubernetes service DNS domain should be used or not. If set to true, the generated addresses will contain the service DNS domain suffix (by default .cluster.local, can be configured using environment variable KUBERNETES_SERVICE_DNS_DOMAIN). Defaults to false.This field can be used only with internal and cluster-ip type listeners.

boolean

14. CertAndKeySecretSource schema reference

Used in: GenericKafkaListenerConfiguration, KafkaClientAuthenticationTls

Property Description

certificate

The name of the file certificate in the Secret.

string

key

The name of the private key in the Secret.

string

secretName

The name of the Secret containing the certificate.

string

15. GenericKafkaListenerConfigurationBootstrap schema reference

Used in: GenericKafkaListenerConfiguration

Full list of GenericKafkaListenerConfigurationBootstrap schema properties

Broker service equivalents of nodePort, host, loadBalancerIP and annotations properties are configured in the GenericKafkaListenerConfigurationBroker schema.

15.1. alternativeNames

You can specify alternative names for the bootstrap service. The names are added to the broker certificates and can be used for TLS hostname verification. The alternativeNames property is applicable to all types of listeners.

Example of an external route listener configured with an additional bootstrap address
listeners:
  #...
  - name: external
    port: 9094
    type: route
    tls: true
    authentication:
      type: tls
    configuration:
      bootstrap:
        alternativeNames:
          - example.hostname1
          - example.hostname2
# ...

15.2. host

The host property is used with route and ingress listeners to specify the hostnames used by the bootstrap and per-broker services.

A host property value is mandatory for ingress listener configuration, as the Ingress controller does not assign any hostnames automatically. Make sure that the hostnames resolve to the Ingress endpoints. Strimzi will not perform any validation that the requested hosts are available and properly routed to the Ingress endpoints.

Example of host configuration for an ingress listener
listeners:
  #...
  - name: external
    port: 9094
    type: ingress
    tls: true
    authentication:
      type: tls
    configuration:
      bootstrap:
        host: bootstrap.myingress.com
      brokers:
      - broker: 0
        host: broker-0.myingress.com
      - broker: 1
        host: broker-1.myingress.com
      - broker: 2
        host: broker-2.myingress.com
# ...

By default, route listener hosts are automatically assigned by OpenShift. However, you can override the assigned route hosts by specifying hosts.

Strimzi does not perform any validation that the requested hosts are available. You must ensure that they are free and can be used.

Example of host configuration for a route listener
# ...
listeners:
  #...
  - name: external
    port: 9094
    type: route
    tls: true
    authentication:
      type: tls
    configuration:
      bootstrap:
        host: bootstrap.myrouter.com
      brokers:
      - broker: 0
        host: broker-0.myrouter.com
      - broker: 1
        host: broker-1.myrouter.com
      - broker: 2
        host: broker-2.myrouter.com
# ...

15.3. nodePort

By default, the port numbers used for the bootstrap and broker services are automatically assigned by Kubernetes. You can override the assigned node ports for nodeport listeners by specifying the requested port numbers.

Strimzi does not perform any validation on the requested ports. You must ensure that they are free and available for use.

Example of an external listener configured with overrides for node ports
# ...
listeners:
  #...
  - name: external
    port: 9094
    type: nodeport
    tls: true
    authentication:
      type: tls
    configuration:
      bootstrap:
        nodePort: 32100
      brokers:
      - broker: 0
        nodePort: 32000
      - broker: 1
        nodePort: 32001
      - broker: 2
        nodePort: 32002
# ...

15.4. loadBalancerIP

Use the loadBalancerIP property to request a specific IP address when creating a loadbalancer. Use this property when you need to use a loadbalancer with a specific IP address. The loadBalancerIP field is ignored if the cloud provider does not support the feature.

Example of an external listener of type loadbalancer with specific loadbalancer IP address requests
# ...
listeners:
  #...
  - name: external
    port: 9094
    type: loadbalancer
    tls: true
    authentication:
      type: tls
    configuration:
      bootstrap:
        loadBalancerIP: 172.29.3.10
      brokers:
      - broker: 0
        loadBalancerIP: 172.29.3.1
      - broker: 1
        loadBalancerIP: 172.29.3.2
      - broker: 2
        loadBalancerIP: 172.29.3.3
# ...

15.5. annotations

Use the annotations property to add annotations to Kubernetes resources related to the listeners. You can use these annotations, for example, to instrument DNS tooling such as External DNS, which automatically assigns DNS names to the loadbalancer services.

Example of an external listener of type loadbalancer using annotations
# ...
listeners:
  #...
  - name: external
    port: 9094
    type: loadbalancer
    tls: true
    authentication:
      type: tls
    configuration:
      bootstrap:
        annotations:
          external-dns.alpha.kubernetes.io/hostname: kafka-bootstrap.mydomain.com.
          external-dns.alpha.kubernetes.io/ttl: "60"
      brokers:
      - broker: 0
        annotations:
          external-dns.alpha.kubernetes.io/hostname: kafka-broker-0.mydomain.com.
          external-dns.alpha.kubernetes.io/ttl: "60"
      - broker: 1
        annotations:
          external-dns.alpha.kubernetes.io/hostname: kafka-broker-1.mydomain.com.
          external-dns.alpha.kubernetes.io/ttl: "60"
      - broker: 2
        annotations:
          external-dns.alpha.kubernetes.io/hostname: kafka-broker-2.mydomain.com.
          external-dns.alpha.kubernetes.io/ttl: "60"
# ...

15.6. GenericKafkaListenerConfigurationBootstrap schema properties

Property Description

alternativeNames

Additional alternative names for the bootstrap service. The alternative names will be added to the list of subject alternative names of the TLS certificates.

string array

host

The bootstrap host. This field will be used in the Ingress resource or in the Route resource to specify the desired hostname. This field can be used only with route (optional) or ingress (required) type listeners.

string

nodePort

Node port for the bootstrap service. This field can be used only with nodeport type listener.

integer

loadBalancerIP

The loadbalancer is requested with the IP address specified in this field. This feature depends on whether the underlying cloud provider supports specifying the loadBalancerIP when a load balancer is created. This field is ignored if the cloud provider does not support the feature.This field can be used only with loadbalancer type listener.

string

annotations

Annotations that will be added to the Ingress, Route, or Service resource. You can use this field to configure DNS providers such as External DNS. This field can be used only with loadbalancer, nodeport, route, or ingress type listeners.

map

labels

Labels that will be added to the Ingress, Route, or Service resource. This field can be used only with loadbalancer, nodeport, route, or ingress type listeners.

map

16. GenericKafkaListenerConfigurationBroker schema reference

Used in: GenericKafkaListenerConfiguration

Full list of GenericKafkaListenerConfigurationBroker schema properties

You can see example configuration for the nodePort, host, loadBalancerIP and annotations properties in the GenericKafkaListenerConfigurationBootstrap schema, which configures bootstrap service overrides.

Advertised addresses for brokers

By default, Strimzi tries to automatically determine the hostnames and ports that your Kafka cluster advertises to its clients. This is not sufficient in all situations, because the infrastructure on which Strimzi is running might not provide the right hostname or port through which Kafka can be accessed.

You can specify a broker ID and customize the advertised hostname and port in the configuration property of the listener. Strimzi will then automatically configure the advertised address in the Kafka brokers and add it to the broker certificates so it can be used for TLS hostname verification. Overriding the advertised host and ports is available for all types of listeners.

Example of an external route listener configured with overrides for advertised addresses
listeners:
  #...
  - name: external
    port: 9094
    type: route
    tls: true
    authentication:
      type: tls
    configuration:
      brokers:
      - broker: 0
        advertisedHost: example.hostname.0
        advertisedPort: 12340
      - broker: 1
        advertisedHost: example.hostname.1
        advertisedPort: 12341
      - broker: 2
        advertisedHost: example.hostname.2
        advertisedPort: 12342
# ...

16.1. GenericKafkaListenerConfigurationBroker schema properties

Property Description

broker

ID of the kafka broker (broker identifier). Broker IDs start from 0 and correspond to the number of broker replicas.

integer

advertisedHost

The host name used in the brokers' advertised.listeners.

string

advertisedPort

The port number used in the brokers' advertised.listeners.

integer

host

The broker host. This field will be used in the Ingress resource or in the Route resource to specify the desired hostname. This field can be used only with route (optional) or ingress (required) type listeners.

string

nodePort

Node port for the per-broker service. This field can be used only with nodeport type listener.

integer

loadBalancerIP

The loadbalancer is requested with the IP address specified in this field. This feature depends on whether the underlying cloud provider supports specifying the loadBalancerIP when a load balancer is created. This field is ignored if the cloud provider does not support the feature.This field can be used only with loadbalancer type listener.

string

annotations

Annotations that will be added to the Ingress or Service resource. You can use this field to configure DNS providers such as External DNS. This field can be used only with loadbalancer, nodeport, or ingress type listeners.

map

labels

Labels that will be added to the Ingress, Route, or Service resource. This field can be used only with loadbalancer, nodeport, route, or ingress type listeners.

map

17. EphemeralStorage schema reference

Used in: JbodStorage, KafkaClusterSpec, KafkaNodePoolSpec, ZookeeperClusterSpec

The type property is a discriminator that distinguishes use of the EphemeralStorage type from PersistentClaimStorage. It must have the value ephemeral for the type EphemeralStorage.

Property Description

id

Storage identification number. It is mandatory only for storage volumes defined in a storage of type 'jbod'.

integer

sizeLimit

When type=ephemeral, defines the total amount of local storage required for this EmptyDir volume (for example 1Gi).

string

type

Must be ephemeral.

string

18. PersistentClaimStorage schema reference

Used in: JbodStorage, KafkaClusterSpec, KafkaNodePoolSpec, ZookeeperClusterSpec

The type property is a discriminator that distinguishes use of the PersistentClaimStorage type from EphemeralStorage. It must have the value persistent-claim for the type PersistentClaimStorage.

Property Description

type

Must be persistent-claim.

string

size

When type=persistent-claim, defines the size of the persistent volume claim (i.e 1Gi). Mandatory when type=persistent-claim.

string

selector

Specifies a specific persistent volume to use. It contains key:value pairs representing labels for selecting such a volume.

map

deleteClaim

Specifies if the persistent volume claim has to be deleted when the cluster is un-deployed.

boolean

class

The storage class to use for dynamic volume allocation.

string

id

Storage identification number. It is mandatory only for storage volumes defined in a storage of type 'jbod'.

integer

overrides

Overrides for individual brokers. The overrides field allows to specify a different configuration for different brokers.

PersistentClaimStorageOverride array

19. PersistentClaimStorageOverride schema reference

Used in: PersistentClaimStorage

Property Description

class

The storage class to use for dynamic volume allocation for this broker.

string

broker

Id of the kafka broker (broker identifier).

integer

20. JbodStorage schema reference

Used in: KafkaClusterSpec, KafkaNodePoolSpec

The type property is a discriminator that distinguishes use of the JbodStorage type from EphemeralStorage, PersistentClaimStorage. It must have the value jbod for the type JbodStorage.

Property Description

type

Must be jbod.

string

volumes

List of volumes as Storage objects representing the JBOD disks array.

EphemeralStorage, PersistentClaimStorage array

21. KafkaAuthorizationSimple schema reference

Used in: KafkaClusterSpec

Full list of KafkaAuthorizationSimple schema properties

Simple authorization in Strimzi uses the AclAuthorizer plugin, the default Access Control Lists (ACLs) authorization plugin provided with Apache Kafka. ACLs allow you to define which users have access to which resources at a granular level.

Configure the Kafka custom resource to use simple authorization. Set the type property in the authorization section to the value simple, and configure a list of super users.

Access rules are configured for the KafkaUser, as described in the ACLRule schema reference.

21.1. superUsers

A list of user principals treated as super users, so that they are always allowed without querying ACL rules.

An example of simple authorization configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
  namespace: myproject
spec:
  kafka:
    # ...
    authorization:
      type: simple
      superUsers:
        - CN=client_1
        - user_2
        - CN=client_3
    # ...
Note
 The super.user configuration option in the config property in Kafka.spec.kafka is ignored. Designate super users in the authorization property instead. For more information, see Kafka broker configuration.

21.2. KafkaAuthorizationSimple schema properties

The type property is a discriminator that distinguishes use of the KafkaAuthorizationSimple type from KafkaAuthorizationOpa, KafkaAuthorizationKeycloak, KafkaAuthorizationCustom. It must have the value simple for the type KafkaAuthorizationSimple.

Property Description

type

Must be simple.

string

superUsers

List of super users. Should contain list of user principals which should get unlimited access rights.

string array

22. KafkaAuthorizationOpa schema reference

Used in: KafkaClusterSpec

Full list of KafkaAuthorizationOpa schema properties

To use Open Policy Agent authorization, set the type property in the authorization section to the value opa, and configure OPA properties as required. Strimzi uses Open Policy Agent plugin for Kafka authorization as the authorizer. For more information about the format of the input data and policy examples, see Open Policy Agent plugin for Kafka authorization.

22.1. url

The URL used to connect to the Open Policy Agent server. The URL has to include the policy which will be queried by the authorizer. Required.

22.2. allowOnError

Defines whether a Kafka client should be allowed or denied by default when the authorizer fails to query the Open Policy Agent, for example, when it is temporarily unavailable. Defaults to false - all actions will be denied.

22.3. initialCacheCapacity

Initial capacity of the local cache used by the authorizer to avoid querying the Open Policy Agent for every request. Defaults to 5000.

22.4. maximumCacheSize

Maximum capacity of the local cache used by the authorizer to avoid querying the Open Policy Agent for every request. Defaults to 50000.

22.5. expireAfterMs

The expiration of the records kept in the local cache to avoid querying the Open Policy Agent for every request. Defines how often the cached authorization decisions are reloaded from the Open Policy Agent server. In milliseconds. Defaults to 3600000 milliseconds (1 hour).

22.6. tlsTrustedCertificates

Trusted certificates for TLS connection to the OPA server.

22.7. superUsers

A list of user principals treated as super users, so that they are always allowed without querying the open Policy Agent policy.

An example of Open Policy Agent authorizer configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
  namespace: myproject
spec:
  kafka:
    # ...
    authorization:
      type: opa
      url: http://opa:8181/v1/data/kafka/allow
      allowOnError: false
      initialCacheCapacity: 1000
      maximumCacheSize: 10000
      expireAfterMs: 60000
      superUsers:
        - CN=fred
        - sam
        - CN=edward
    # ...

22.8. KafkaAuthorizationOpa schema properties

The type property is a discriminator that distinguishes use of the KafkaAuthorizationOpa type from KafkaAuthorizationSimple, KafkaAuthorizationKeycloak, KafkaAuthorizationCustom. It must have the value opa for the type KafkaAuthorizationOpa.

Property Description

type

Must be opa.

string

url

The URL used to connect to the Open Policy Agent server. The URL has to include the policy which will be queried by the authorizer. This option is required.

string

allowOnError

Defines whether a Kafka client should be allowed or denied by default when the authorizer fails to query the Open Policy Agent, for example, when it is temporarily unavailable). Defaults to false - all actions will be denied.

boolean

initialCacheCapacity

Initial capacity of the local cache used by the authorizer to avoid querying the Open Policy Agent for every request Defaults to 5000.

integer

maximumCacheSize

Maximum capacity of the local cache used by the authorizer to avoid querying the Open Policy Agent for every request. Defaults to 50000.

integer

expireAfterMs

The expiration of the records kept in the local cache to avoid querying the Open Policy Agent for every request. Defines how often the cached authorization decisions are reloaded from the Open Policy Agent server. In milliseconds. Defaults to 3600000.

integer

tlsTrustedCertificates

Trusted certificates for TLS connection to the OPA server.

CertSecretSource array

superUsers

List of super users, which is specifically a list of user principals that have unlimited access rights.

string array

enableMetrics

Defines whether the Open Policy Agent authorizer plugin should provide metrics. Defaults to false.

boolean

23. KafkaAuthorizationKeycloak schema reference

Used in: KafkaClusterSpec

The type property is a discriminator that distinguishes use of the KafkaAuthorizationKeycloak type from KafkaAuthorizationSimple, KafkaAuthorizationOpa, KafkaAuthorizationCustom. It must have the value keycloak for the type KafkaAuthorizationKeycloak.

Property Description

type

Must be keycloak.

string

clientId

OAuth Client ID which the Kafka client can use to authenticate against the OAuth server and use the token endpoint URI.

string

tokenEndpointUri

Authorization server token endpoint URI.

string

tlsTrustedCertificates

Trusted certificates for TLS connection to the OAuth server.

CertSecretSource array

disableTlsHostnameVerification

Enable or disable TLS hostname verification. Default value is false.

boolean

delegateToKafkaAcls

Whether authorization decision should be delegated to the 'Simple' authorizer if DENIED by Keycloak Authorization Services policies. Default value is false.

boolean

grantsRefreshPeriodSeconds

The time between two consecutive grants refresh runs in seconds. The default value is 60.

integer

grantsRefreshPoolSize

The number of threads to use to refresh grants for active sessions. The more threads, the more parallelism, so the sooner the job completes. However, using more threads places a heavier load on the authorization server. The default value is 5.

integer

grantsGcPeriodSeconds

The time, in seconds, between consecutive runs of a job that cleans stale grants from the cache. The default value is 300.

integer

grantsAlwaysLatest

Controls whether the latest grants are fetched for a new session. When enabled, grants are retrieved from Keycloak and cached for the user. The default value is false.

boolean

superUsers

List of super users. Should contain list of user principals which should get unlimited access rights.

string array

connectTimeoutSeconds

The connect timeout in seconds when connecting to authorization server. If not set, the effective connect timeout is 60 seconds.

integer

readTimeoutSeconds

The read timeout in seconds when connecting to authorization server. If not set, the effective read timeout is 60 seconds.

integer

httpRetries

The maximum number of retries to attempt if an initial HTTP request fails. If not set, the default is to not attempt any retries.

integer

enableMetrics

Enable or disable OAuth metrics. The default value is false.

boolean

grantsMaxIdleTimeSeconds

The time, in seconds, after which an idle grant can be evicted from the cache. The default value is 300.

integer

24. KafkaAuthorizationCustom schema reference

Used in: KafkaClusterSpec

Full list of KafkaAuthorizationCustom schema properties

To use custom authorization in Strimzi, you can configure your own Authorizer plugin to define Access Control Lists (ACLs).

ACLs allow you to define which users have access to which resources at a granular level.

Configure the Kafka custom resource to use custom authorization. Set the type property in the authorization section to the value custom, and the set following properties.

Important
 The custom authorizer must implement the org.apache.kafka.server.authorizer.Authorizer interface, and support configuration of super.users using the super.users configuration property.

24.1. authorizerClass

(Required) Java class that implements the org.apache.kafka.server.authorizer.Authorizer interface to support custom ACLs.

24.2. superUsers

A list of user principals treated as super users, so that they are always allowed without querying ACL rules.

You can add configuration for initializing the custom authorizer using Kafka.spec.kafka.config.

An example of custom authorization configuration under Kafka.spec
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
  namespace: myproject
spec:
  kafka:
    # ...
    authorization:
      type: custom
      authorizerClass: io.mycompany.CustomAuthorizer
      superUsers:
        - CN=client_1
        - user_2
        - CN=client_3
    # ...
    config:
      authorization.custom.property1=value1
      authorization.custom.property2=value2
    # ...

In addition to the Kafka custom resource configuration, the JAR file containing the custom authorizer class along with its dependencies must be available on the classpath of the Kafka broker.

The Strimzi Maven build process provides a mechanism to add custom third-party libraries to the generated Kafka broker container image by adding them as dependencies in the pom.xml file under the docker-images/kafka/kafka-thirdparty-libs directory. The directory contains different folders for different Kafka versions. Choose the appropriate folder. Before modifying the pom.xml file, the third-party library must be available in a Maven repository, and that Maven repository must be accessible to the Strimzi build process.

Note
 The super.user configuration option in the config property in Kafka.spec.kafka is ignored. Designate super users in the authorization property instead. For more information, see Kafka broker configuration.

Custom authorization can make use of group membership information extracted from the JWT token during authentication when using oauth authentication and configuring groupsClaim configuration attribute. Groups are available on the OAuthKafkaPrincipal object during authorize() call as follows:

    public List<AuthorizationResult> authorize(AuthorizableRequestContext requestContext, List<Action> actions) {

        KafkaPrincipal principal = requestContext.principal();
        if (principal instanceof OAuthKafkaPrincipal) {
            OAuthKafkaPrincipal p = (OAuthKafkaPrincipal) principal;

            for (String group: p.getGroups()) {
                System.out.println("Group: " + group);
            }
        }
    }

24.3. KafkaAuthorizationCustom schema properties

The type property is a discriminator that distinguishes use of the KafkaAuthorizationCustom type from KafkaAuthorizationSimple, KafkaAuthorizationOpa, KafkaAuthorizationKeycloak. It must have the value custom for the type KafkaAuthorizationCustom.

Property Description

type

Must be custom.

string

authorizerClass

Authorization implementation class, which must be available in classpath.

string

superUsers

List of super users, which are user principals with unlimited access rights.

string array

supportsAdminApi

Indicates whether the custom authorizer supports the APIs for managing ACLs using the Kafka Admin API. Defaults to false.

boolean

25. Rack schema reference

Used in: KafkaBridgeSpec, KafkaClusterSpec, KafkaConnectSpec, KafkaMirrorMaker2Spec

Full list of Rack schema properties

The rack option configures rack awareness. A rack can represent an availability zone, data center, or an actual rack in your data center. The rack is configured through a topologyKey. topologyKey identifies a label on Kubernetes nodes that contains the name of the topology in its value. An example of such a label is topology.kubernetes.io/zone (or failure-domain.beta.kubernetes.io/zone on older Kubernetes versions), which contains the name of the availability zone in which the Kubernetes node runs. You can configure your Kafka cluster to be aware of the rack in which it runs, and enable additional features such as spreading partition replicas across different racks or consuming messages from the closest replicas.

For more information about Kubernetes node labels, see Well-Known Labels, Annotations and Taints. Consult your Kubernetes administrator regarding the node label that represents the zone or rack into which the node is deployed.

25.1. Spreading partition replicas across racks

When rack awareness is configured, Strimzi will set broker.rack configuration for each Kafka broker. The broker.rack configuration assigns a rack ID to each broker. When broker.rack is configured, Kafka brokers will spread partition replicas across as many different racks as possible. When replicas are spread across multiple racks, the probability that multiple replicas will fail at the same time is lower than if they would be in the same rack. Spreading replicas improves resiliency, and is important for availability and reliability. To enable rack awareness in Kafka, add the rack option to the .spec.kafka section of the Kafka custom resource as shown in the example below.

Example rack configuration for Kafka
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    rack:
      topologyKey: topology.kubernetes.io/zone
    # ...
Note
 The rack in which brokers are running can change in some cases when the pods are deleted or restarted. As a result, the replicas running in different racks might then share the same rack. Use Cruise Control and the KafkaRebalance resource with the RackAwareGoal to make sure that replicas remain distributed across different racks.

When rack awareness is enabled in the Kafka custom resource, Strimzi will automatically add the Kubernetes preferredDuringSchedulingIgnoredDuringExecution affinity rule to distribute the Kafka brokers across the different racks. However, the preferred rule does not guarantee that the brokers will be spread. Depending on your exact Kubernetes and Kafka configurations, you should add additional affinity rules or configure topologySpreadConstraints for both ZooKeeper and Kafka to make sure the nodes are properly distributed accross as many racks as possible. For more information see Configuring pod scheduling.

25.2. Consuming messages from the closest replicas

Rack awareness can also be used in consumers to fetch data from the closest replica. This is useful for reducing the load on your network when a Kafka cluster spans multiple datacenters and can also reduce costs when running Kafka in public clouds. However, it can lead to increased latency.

In order to be able to consume from the closest replica, rack awareness has to be configured in the Kafka cluster, and the RackAwareReplicaSelector has to be enabled. The replica selector plugin provides the logic that enables clients to consume from the nearest replica. The default implementation uses LeaderSelector to always select the leader replica for the client. Specify RackAwareReplicaSelector for the replica.selector.class to switch from the default implementation.

Example rack configuration with enabled replica-aware selector
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    rack:
      topologyKey: topology.kubernetes.io/zone
    config:
      # ...
      replica.selector.class: org.apache.kafka.common.replica.RackAwareReplicaSelector
    # ...

In addition to the Kafka broker configuration, you also need to specify the client.rack option in your consumers. The client.rack option should specify the rack ID in which the consumer is running. RackAwareReplicaSelector associates matching broker.rack and client.rack IDs, to find the nearest replica and consume from it. If there are multiple replicas in the same rack, RackAwareReplicaSelector always selects the most up-to-date replica. If the rack ID is not specified, or if it cannot find a replica with the same rack ID, it will fall back to the leader replica.

consuming from replicas in the same availability zone
Figure 1. Example showing client consuming from replicas in the same availability zone

You can also configure Kafka Connect, MirrorMaker 2 and Kafka Bridge so that connectors consume messages from the closest replicas. You enable rack awareness in the KafkaConnect, KafkaMirrorMaker2, and KafkaBridge custom resources. The configuration does does not set affinity rules, but you can also configure affinity or topologySpreadConstraints. For more information see Configuring pod scheduling.

When deploying Kafka Connect using Strimzi, you can use the rack section in the KafkaConnect custom resource to automatically configure the client.rack option.

Example rack configuration for Kafka Connect
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
# ...
spec:
  # ...
  rack:
    topologyKey: topology.kubernetes.io/zone
  # ...

When deploying MirrorMaker 2 using Strimzi, you can use the rack section in the KafkaMirrorMaker2 custom resource to automatically configure the client.rack option.

Example rack configuration for MirrorMaker 2
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaMirrorMaker2
# ...
spec:
  # ...
  rack:
    topologyKey: topology.kubernetes.io/zone
  # ...

When deploying Kafka Bridge using Strimzi, you can use the rack section in the KafkaBridge custom resource to automatically configure the client.rack option.

Example rack configuration for Kafka Bridge
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaBridge
# ...
spec:
  # ...
  rack:
    topologyKey: topology.kubernetes.io/zone
  # ...

25.3. Rack schema properties

Property Description

topologyKey

A key that matches labels assigned to the Kubernetes cluster nodes. The value of the label is used to set a broker’s broker.rack config, and the client.rack config for Kafka Connect or MirrorMaker 2.

string

26. Probe schema reference

Used in: CruiseControlSpec, EntityTopicOperatorSpec, EntityUserOperatorSpec, KafkaBridgeSpec, KafkaClusterSpec, KafkaConnectSpec, KafkaExporterSpec, KafkaMirrorMaker2Spec, KafkaMirrorMakerSpec, TlsSidecar, ZookeeperClusterSpec

Property Description

failureThreshold

Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.

integer

initialDelaySeconds

The initial delay before first the health is first checked. Default to 15 seconds. Minimum value is 0.

integer

periodSeconds

How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.

integer

successThreshold

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness. Minimum value is 1.

integer

timeoutSeconds

The timeout for each attempted health check. Default to 5 seconds. Minimum value is 1.

integer

27. JvmOptions schema reference

Used in: CruiseControlSpec, EntityTopicOperatorSpec, EntityUserOperatorSpec, KafkaBridgeSpec, KafkaClusterSpec, KafkaConnectSpec, KafkaMirrorMaker2Spec, KafkaMirrorMakerSpec, KafkaNodePoolSpec, ZookeeperClusterSpec

Property Description

-XX

A map of -XX options to the JVM.

map

-Xms

-Xms option to to the JVM.

string

-Xmx

-Xmx option to to the JVM.

string

gcLoggingEnabled

Specifies whether the Garbage Collection logging is enabled. The default is false.

boolean

javaSystemProperties

A map of additional system properties which will be passed using the -D option to the JVM.

SystemProperty array

28. SystemProperty schema reference

Used in: JvmOptions

Property Description

name

The system property name.

string

value

The system property value.

string

29. KafkaJmxOptions schema reference

Used in: KafkaClusterSpec, KafkaConnectSpec, KafkaMirrorMaker2Spec, ZookeeperClusterSpec

Full list of KafkaJmxOptions schema properties

Configures JMX connection options.

Get JMX metrics from Kafka brokers, ZooKeeper nodes, Kafka Connect, and MirrorMaker 2. by connecting to port 9999. Use the jmxOptions property to configure a password-protected or an unprotected JMX port. Using password protection prevents unauthorized pods from accessing the port.

You can then obtain metrics about the component.

For example, for each Kafka broker you can obtain bytes-per-second usage data from clients, or the request rate of the network of the broker.

To enable security for the JMX port, set the type parameter in the authentication field to password.

Example password-protected JMX configuration for Kafka brokers and ZooKeeper nodes
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    jmxOptions:
      authentication:
        type: "password"
    # ...
  zookeeper:
    # ...
    jmxOptions:
      authentication:
        type: "password"
    #...

You can then deploy a pod into a cluster and obtain JMX metrics using the headless service by specifying which broker you want to address.

For example, to get JMX metrics from broker 0 you specify:

"CLUSTER-NAME-kafka-0.CLUSTER-NAME-kafka-brokers"

CLUSTER-NAME-kafka-0 is name of the broker pod, and CLUSTER-NAME-kafka-brokers is the name of the headless service to return the IPs of the broker pods.

If the JMX port is secured, you can get the username and password by referencing them from the JMX Secret in the deployment of your pod.

For an unprotected JMX port, use an empty object {} to open the JMX port on the headless service. You deploy a pod and obtain metrics in the same way as for the protected port, but in this case any pod can read from the JMX port.

Example open port JMX configuration for Kafka brokers and ZooKeeper nodes
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    jmxOptions: {}
    # ...
  zookeeper:
    # ...
    jmxOptions: {}
    # ...
Additional resources

29.1. KafkaJmxOptions schema properties

Property Description

authentication

Authentication configuration for connecting to the JMX port. The type depends on the value of the authentication.type property within the given object, which must be one of [password].

KafkaJmxAuthenticationPassword

30. KafkaJmxAuthenticationPassword schema reference

Used in: KafkaJmxOptions

The type property is a discriminator that distinguishes use of the KafkaJmxAuthenticationPassword type from other subtypes which may be added in the future. It must have the value password for the type KafkaJmxAuthenticationPassword.

Property Description

type

Must be password.

string

31. JmxPrometheusExporterMetrics schema reference

Used in: CruiseControlSpec, KafkaClusterSpec, KafkaConnectSpec, KafkaMirrorMaker2Spec, KafkaMirrorMakerSpec, ZookeeperClusterSpec

The type property is a discriminator that distinguishes use of the JmxPrometheusExporterMetrics type from other subtypes which may be added in the future. It must have the value jmxPrometheusExporter for the type JmxPrometheusExporterMetrics.

Property Description

type

Must be jmxPrometheusExporter.

string

valueFrom

ConfigMap entry where the Prometheus JMX Exporter configuration is stored. For details of the structure of this configuration, see the Prometheus JMX Exporter.

ExternalConfigurationReference

32. ExternalConfigurationReference schema reference

Used in: ExternalLogging, JmxPrometheusExporterMetrics

Property Description

configMapKeyRef

Reference to the key in the ConfigMap containing the configuration. For more information, see the external documentation for core/v1 configmapkeyselector.

ConfigMapKeySelector

33. InlineLogging schema reference

Used in: CruiseControlSpec, EntityTopicOperatorSpec, EntityUserOperatorSpec, KafkaBridgeSpec, KafkaClusterSpec, KafkaConnectSpec, KafkaMirrorMaker2Spec, KafkaMirrorMakerSpec, ZookeeperClusterSpec

The type property is a discriminator that distinguishes use of the InlineLogging type from ExternalLogging. It must have the value inline for the type InlineLogging.

Property Description

type

Must be inline.

string

loggers

A Map from logger name to logger level.

map

34. ExternalLogging schema reference

Used in: CruiseControlSpec, EntityTopicOperatorSpec, EntityUserOperatorSpec, KafkaBridgeSpec, KafkaClusterSpec, KafkaConnectSpec, KafkaMirrorMaker2Spec, KafkaMirrorMakerSpec, ZookeeperClusterSpec

The type property is a discriminator that distinguishes use of the ExternalLogging type from InlineLogging. It must have the value external for the type ExternalLogging.

Property Description

type

Must be external.

string

valueFrom

ConfigMap entry where the logging configuration is stored.

ExternalConfigurationReference

35. KafkaClusterTemplate schema reference

Used in: KafkaClusterSpec

Property Description

statefulset

The statefulset property has been deprecated. Support for StatefulSets was removed in Strimzi 0.35.0. This property is ignored. Template for Kafka StatefulSet.

StatefulSetTemplate

pod

Template for Kafka Pods.

PodTemplate

bootstrapService

Template for Kafka bootstrap Service.

InternalServiceTemplate

brokersService

Template for Kafka broker Service.

InternalServiceTemplate

externalBootstrapService

Template for Kafka external bootstrap Service.

ResourceTemplate

perPodService

Template for Kafka per-pod Services used for access from outside of Kubernetes.

ResourceTemplate

externalBootstrapRoute

Template for Kafka external bootstrap Route.

ResourceTemplate

perPodRoute

Template for Kafka per-pod Routes used for access from outside of OpenShift.

ResourceTemplate

externalBootstrapIngress

Template for Kafka external bootstrap Ingress.

ResourceTemplate

perPodIngress

Template for Kafka per-pod Ingress used for access from outside of Kubernetes.

ResourceTemplate

persistentVolumeClaim

Template for all Kafka PersistentVolumeClaims.

ResourceTemplate

podDisruptionBudget

Template for Kafka PodDisruptionBudget.

PodDisruptionBudgetTemplate

kafkaContainer

Template for the Kafka broker container.

ContainerTemplate

initContainer

Template for the Kafka init container.

ContainerTemplate

clusterCaCert

Template for Secret with Kafka Cluster certificate public key.

ResourceTemplate

serviceAccount

Template for the Kafka service account.

ResourceTemplate

jmxSecret

Template for Secret of the Kafka Cluster JMX authentication.

ResourceTemplate

clusterRoleBinding

Template for the Kafka ClusterRoleBinding.

ResourceTemplate

podSet

Template for Kafka StrimziPodSet resource.

ResourceTemplate

36. StatefulSetTemplate schema reference

Used in: KafkaClusterTemplate, ZookeeperClusterTemplate

Property Description

metadata

Metadata applied to the resource.

MetadataTemplate

podManagementPolicy

PodManagementPolicy which will be used for this StatefulSet. Valid values are Parallel and OrderedReady. Defaults to Parallel.

string (one of [OrderedReady, Parallel])

37. MetadataTemplate schema reference

Used in: BuildConfigTemplate, DeploymentTemplate, InternalServiceTemplate, PodDisruptionBudgetTemplate, PodTemplate, ResourceTemplate, StatefulSetTemplate

Full list of MetadataTemplate schema properties

Labels and Annotations are used to identify and organize resources, and are configured in the metadata property.

For example:

# ...
template:
  pod:
    metadata:
      labels:
        label1: value1
        label2: value2
      annotations:
        annotation1: value1
        annotation2: value2
# ...

The labels and annotations fields can contain any labels or annotations that do not contain the reserved string strimzi.io. Labels and annotations containing strimzi.io are used internally by Strimzi and cannot be configured.

37.1. MetadataTemplate schema properties

Property Description

labels

Labels added to the Kubernetes resource.

map

annotations

Annotations added to the Kubernetes resource.

map

38. PodTemplate schema reference

Used in: CruiseControlTemplate, EntityOperatorTemplate, JmxTransTemplate, KafkaBridgeTemplate, KafkaClusterTemplate, KafkaConnectTemplate, KafkaExporterTemplate, KafkaMirrorMakerTemplate, KafkaNodePoolTemplate, ZookeeperClusterTemplate

Full list of PodTemplate schema properties

Configures the template for Kafka pods.

Example PodTemplate configuration
# ...
template:
  pod:
    metadata:
      labels:
        label1: value1
      annotations:
        anno1: value1
    imagePullSecrets:
      - name: my-docker-credentials
    securityContext:
      runAsUser: 1000001
      fsGroup: 0
    terminationGracePeriodSeconds: 120
# ...

38.1. hostAliases

Use the hostAliases property to a specify a list of hosts and IP addresses, which are injected into the /etc/hosts file of the pod.

This configuration is especially useful for Kafka Connect or MirrorMaker when a connection outside of the cluster is also requested by users.

Example hostAliases configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
#...
spec:
  # ...
  template:
    pod:
      hostAliases:
      - ip: "192.168.1.86"
        hostnames:
        - "my-host-1"
        - "my-host-2"
      #...

38.2. PodTemplate schema properties

Property Description

metadata

Metadata applied to the resource.

MetadataTemplate

imagePullSecrets

List of references to secrets in the same namespace to use for pulling any of the images used by this Pod. When the STRIMZI_IMAGE_PULL_SECRETS environment variable in Cluster Operator and the imagePullSecrets option are specified, only the imagePullSecrets variable is used and the STRIMZI_IMAGE_PULL_SECRETS variable is ignored. For more information, see the external documentation for core/v1 localobjectreference.

LocalObjectReference array

securityContext

Configures pod-level security attributes and common container settings. For more information, see the external documentation for core/v1 podsecuritycontext.

PodSecurityContext

terminationGracePeriodSeconds

The grace period is the duration in seconds after the processes running in the pod are sent a termination signal, and the time when the processes are forcibly halted with a kill signal. Set this value to longer than the expected cleanup time for your process. Value must be a non-negative integer. A zero value indicates delete immediately. You might need to increase the grace period for very large Kafka clusters, so that the Kafka brokers have enough time to transfer their work to another broker before they are terminated. Defaults to 30 seconds.

integer

affinity

The pod’s affinity rules. For more information, see the external documentation for core/v1 affinity.

Affinity

tolerations

The pod’s tolerations. For more information, see the external documentation for core/v1 toleration.

Toleration array

priorityClassName

The name of the priority class used to assign priority to the pods. For more information about priority classes, see Pod Priority and Preemption.

string

schedulerName

The name of the scheduler used to dispatch this Pod. If not specified, the default scheduler will be used.

string

hostAliases

The pod’s HostAliases. HostAliases is an optional list of hosts and IPs that will be injected into the Pod’s hosts file if specified. For more information, see the external documentation for core/v1 hostalias.

HostAlias array

tmpDirSizeLimit

Defines the total amount (for example 1Gi) of local storage required for temporary EmptyDir volume (/tmp). Default value is 5Mi.

string

enableServiceLinks

Indicates whether information about services should be injected into Pod’s environment variables.

boolean

topologySpreadConstraints

The pod’s topology spread constraints. For more information, see the external documentation for core/v1 topologyspreadconstraint.

TopologySpreadConstraint array

39. InternalServiceTemplate schema reference

Used in: CruiseControlTemplate, KafkaBridgeTemplate, KafkaClusterTemplate, KafkaConnectTemplate, ZookeeperClusterTemplate

Property Description

metadata

Metadata applied to the resource.

MetadataTemplate

ipFamilyPolicy

Specifies the IP Family Policy used by the service. Available options are SingleStack, PreferDualStack and RequireDualStack. SingleStack is for a single IP family. PreferDualStack is for two IP families on dual-stack configured clusters or a single IP family on single-stack clusters. RequireDualStack fails unless there are two IP families on dual-stack configured clusters. If unspecified, Kubernetes will choose the default value based on the service type.

string (one of [RequireDualStack, SingleStack, PreferDualStack])

ipFamilies

Specifies the IP Families used by the service. Available options are IPv4 and IPv6. If unspecified, Kubernetes will choose the default value based on the ipFamilyPolicy setting.

string (one or more of [IPv6, IPv4]) array

40. ResourceTemplate schema reference

Used in: CruiseControlTemplate, EntityOperatorTemplate, JmxTransTemplate, KafkaBridgeTemplate, KafkaClusterTemplate, KafkaConnectTemplate, KafkaExporterTemplate, KafkaMirrorMakerTemplate, KafkaNodePoolTemplate, KafkaUserTemplate, ZookeeperClusterTemplate

Property Description

metadata

Metadata applied to the resource.

MetadataTemplate

41. PodDisruptionBudgetTemplate schema reference

Used in: CruiseControlTemplate, KafkaBridgeTemplate, KafkaClusterTemplate, KafkaConnectTemplate, KafkaMirrorMakerTemplate, ZookeeperClusterTemplate

Full list of PodDisruptionBudgetTemplate schema properties

A PodDisruptionBudget (PDB) is a Kubernetes resource that ensures high availability by specifying the minimum number of pods that must be available during planned maintenance or upgrades. Strimzi creates a PDB for every new StrimziPodSet or Deployment. By default, the PDB allows only one pod to be unavailable at any given time. You can increase the number of unavailable pods allowed by changing the default value of the maxUnavailable property.

StrimziPodSet custom resources manage pods using a custom controller that cannot use the maxUnavailable value directly. Instead, the maxUnavailable value is automatically converted to a minAvailable value when creating the PDB resource, which effectively serves the same purpose, as illustrated in the following examples:

  • If there are three broker pods and the maxUnavailable property is set to 1 in the Kafka resource, the minAvailable setting is 2, allowing one pod to be unavailable.

  • If there are three broker pods and the maxUnavailable property is set to 0 (zero), the minAvailable setting is 3, requiring all three broker pods to be available and allowing zero pods to be unavailable.

Example PodDisruptionBudget template configuration
# ...
template:
  podDisruptionBudget:
    metadata:
      labels:
        key1: label1
        key2: label2
      annotations:
        key1: label1
        key2: label2
    maxUnavailable: 1
# ...

41.1. PodDisruptionBudgetTemplate schema properties

Property Description

metadata

Metadata to apply to the PodDisruptionBudgetTemplate resource.

MetadataTemplate

maxUnavailable

Maximum number of unavailable pods to allow automatic Pod eviction. A Pod eviction is allowed when the maxUnavailable number of pods or fewer are unavailable after the eviction. Setting this value to 0 prevents all voluntary evictions, so the pods must be evicted manually. Defaults to 1.

integer

42. ContainerTemplate schema reference

Used in: CruiseControlTemplate, EntityOperatorTemplate, JmxTransTemplate, KafkaBridgeTemplate, KafkaClusterTemplate, KafkaConnectTemplate, KafkaExporterTemplate, KafkaMirrorMakerTemplate, KafkaNodePoolTemplate, ZookeeperClusterTemplate

Full list of ContainerTemplate schema properties

You can set custom security context and environment variables for a container.

The environment variables are defined under the env property as a list of objects with name and value fields. The following example shows two custom environment variables and a custom security context set for the Kafka broker containers:

# ...
template:
  kafkaContainer:
    env:
    - name: EXAMPLE_ENV_1
      value: example.env.one
    - name: EXAMPLE_ENV_2
      value: example.env.two
    securityContext:
      runAsUser: 2000
# ...

Environment variables prefixed with KAFKA_ are internal to Strimzi and should be avoided. If you set a custom environment variable that is already in use by Strimzi, it is ignored and a warning is recorded in the log.

42.1. ContainerTemplate schema properties

Property Description

env

Environment variables which should be applied to the container.

ContainerEnvVar array

securityContext

Security context for the container. For more information, see the external documentation for core/v1 securitycontext.

SecurityContext

43. ContainerEnvVar schema reference

Used in: ContainerTemplate

Property Description

name

The environment variable key.

string

value

The environment variable value.

string

44. ZookeeperClusterSpec schema reference

Used in: KafkaSpec

Full list of ZookeeperClusterSpec schema properties

Configures a ZooKeeper cluster.

44.1. config

Use the config properties to configure ZooKeeper options as keys.

The values can be one of the following JSON types:

  • String

  • Number

  • Boolean

Exceptions

You can specify and configure the options listed in the ZooKeeper documentation.

However, Strimzi takes care of configuring and managing options related to the following, which cannot be changed:

  • Security (encryption, authentication, and authorization)

  • Listener configuration

  • Configuration of data directories

  • ZooKeeper cluster composition

Properties with the following prefixes cannot be set:

  • 4lw.commands.whitelist

  • authProvider

  • clientPort

  • dataDir

  • dataLogDir

  • quorum.auth

  • reconfigEnabled

  • requireClientAuthScheme

  • secureClientPort

  • server.

  • snapshot.trust.empty

  • standaloneEnabled

  • serverCnxnFactory

  • ssl.

  • sslQuorum

If the config property contains an option that cannot be changed, it is disregarded, and a warning message is logged to the Cluster Operator log file. All other supported options are forwarded to ZooKeeper, including the following exceptions to the options configured by Strimzi:

Example ZooKeeper configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
spec:
  kafka:
    # ...
  zookeeper:
    # ...
    config:
      autopurge.snapRetainCount: 3
      autopurge.purgeInterval: 2
    # ...

44.2. logging

ZooKeeper has a configurable logger:

  • zookeeper.root.logger

ZooKeeper uses the Apache log4j logger implementation.

Use the logging property to configure loggers and logger levels.

You can set the log levels by specifying the logger and level directly (inline) or use a custom (external) ConfigMap. If a ConfigMap is used, you set logging.valueFrom.configMapKeyRef.name property to the name of the ConfigMap containing the external logging configuration. Inside the ConfigMap, the logging configuration is described using log4j.properties. Both logging.valueFrom.configMapKeyRef.name and logging.valueFrom.configMapKeyRef.key properties are mandatory. A ConfigMap using the exact logging configuration specified is created with the custom resource when the Cluster Operator is running, then recreated after each reconciliation. If you do not specify a custom ConfigMap, default logging settings are used. If a specific logger value is not set, upper-level logger settings are inherited for that logger. For more information about log levels, see Apache logging services.

Here we see examples of inline and external logging. The inline logging specifies the root logger level. You can also set log levels for specific classes or loggers by adding them to the loggers property.

Inline logging
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
spec:
  # ...
  zookeeper:
    # ...
    logging:
      type: inline
      loggers:
        zookeeper.root.logger: INFO
        log4j.logger.org.apache.zookeeper.server.FinalRequestProcessor: TRACE
        log4j.logger.org.apache.zookeeper.server.ZooKeeperServer: DEBUG
    # ...
Note
 Setting a log level to DEBUG may result in a large amount of log output and may have performance implications.
External logging
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
spec:
  # ...
  zookeeper:
    # ...
    logging:
      type: external
      valueFrom:
        configMapKeyRef:
          name: customConfigMap
          key: zookeeper-log4j.properties
  # ...
Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

44.3. ZookeeperClusterSpec schema properties

Property Description

replicas

The number of pods in the cluster.

integer

image

The docker image for the pods.

string

storage

Storage configuration (disk). Cannot be updated. The type depends on the value of the storage.type property within the given object, which must be one of [ephemeral, persistent-claim].

EphemeralStorage, PersistentClaimStorage

config

The ZooKeeper broker config. Properties with the following prefixes cannot be set: server., dataDir, dataLogDir, clientPort, authProvider, quorum.auth, requireClientAuthScheme, snapshot.trust.empty, standaloneEnabled, reconfigEnabled, 4lw.commands.whitelist, secureClientPort, ssl., serverCnxnFactory, sslQuorum (with the exception of: ssl.protocol, ssl.quorum.protocol, ssl.enabledProtocols, ssl.quorum.enabledProtocols, ssl.ciphersuites, ssl.quorum.ciphersuites, ssl.hostnameVerification, ssl.quorum.hostnameVerification).

map

livenessProbe

Pod liveness checking.

Probe

readinessProbe

Pod readiness checking.

Probe

jvmOptions

JVM Options for pods.

JvmOptions

jmxOptions

JMX Options for Zookeeper nodes.

KafkaJmxOptions

resources

CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.

ResourceRequirements

metricsConfig

Metrics configuration. The type depends on the value of the metricsConfig.type property within the given object, which must be one of [jmxPrometheusExporter].

JmxPrometheusExporterMetrics

logging

Logging configuration for ZooKeeper. The type depends on the value of the logging.type property within the given object, which must be one of [inline, external].

InlineLogging, ExternalLogging

template

Template for ZooKeeper cluster resources. The template allows users to specify how the Kubernetes resources are generated.

ZookeeperClusterTemplate

45. ZookeeperClusterTemplate schema reference

Used in: ZookeeperClusterSpec

Property Description

statefulset

The statefulset property has been deprecated. Support for StatefulSets was removed in Strimzi 0.35.0. This property is ignored. Template for ZooKeeper StatefulSet.

StatefulSetTemplate

pod

Template for ZooKeeper Pods.

PodTemplate

clientService

Template for ZooKeeper client Service.

InternalServiceTemplate

nodesService

Template for ZooKeeper nodes Service.

InternalServiceTemplate

persistentVolumeClaim

Template for all ZooKeeper PersistentVolumeClaims.

ResourceTemplate

podDisruptionBudget

Template for ZooKeeper PodDisruptionBudget.

PodDisruptionBudgetTemplate

zookeeperContainer

Template for the ZooKeeper container.

ContainerTemplate

serviceAccount

Template for the ZooKeeper service account.

ResourceTemplate

jmxSecret

Template for Secret of the Zookeeper Cluster JMX authentication.

ResourceTemplate

podSet

Template for ZooKeeper StrimziPodSet resource.

ResourceTemplate

46. EntityOperatorSpec schema reference

Used in: KafkaSpec

Property Description

topicOperator

Configuration of the Topic Operator.

EntityTopicOperatorSpec

userOperator

Configuration of the User Operator.

EntityUserOperatorSpec

tlsSidecar

TLS sidecar configuration.

TlsSidecar

template

Template for Entity Operator resources. The template allows users to specify how a Deployment and Pod is generated.

EntityOperatorTemplate

47. EntityTopicOperatorSpec schema reference

Used in: EntityOperatorSpec

Full list of EntityTopicOperatorSpec schema properties

Configures the Topic Operator.

47.1. logging

The Topic Operator has a configurable logger:

  • rootLogger.level

The Topic Operator uses the Apache log4j2 logger implementation.

Use the logging property in the entityOperator.topicOperator field of the Kafka resource Kafka resource to configure loggers and logger levels.

You can set the log levels by specifying the logger and level directly (inline) or use a custom (external) ConfigMap. If a ConfigMap is used, you set logging.valueFrom.configMapKeyRef.name property to the name of the ConfigMap containing the external logging configuration. Inside the ConfigMap, the logging configuration is described using log4j2.properties. Both logging.valueFrom.configMapKeyRef.name and logging.valueFrom.configMapKeyRef.key properties are mandatory. A ConfigMap using the exact logging configuration specified is created with the custom resource when the Cluster Operator is running, then recreated after each reconciliation. If you do not specify a custom ConfigMap, default logging settings are used. If a specific logger value is not set, upper-level logger settings are inherited for that logger. For more information about log levels, see Apache logging services.

Here we see examples of inline and external logging. The inline logging specifies the root logger level. You can also set log levels for specific classes or loggers by adding them to the loggers property.

Inline logging
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
  zookeeper:
    # ...
  entityOperator:
    # ...
    topicOperator:
      watchedNamespace: my-topic-namespace
      reconciliationIntervalSeconds: 60
      logging:
        type: inline
        loggers:
          rootLogger.level: INFO
          logger.top.name: io.strimzi.operator.topic # (1)
          logger.top.level: DEBUG # (2)
          logger.toc.name: io.strimzi.operator.topic.TopicOperator # (3)
          logger.toc.level: TRACE # (4)
          logger.clients.level: DEBUG # (5)
  # ...

  1. Creates a logger for the topic package.

  2. Sets the logging level for the topic package.

  3. Creates a logger for the TopicOperator class.

  4. Sets the logging level for the TopicOperator class.

  5. Changes the logging level for the default clients logger. The clients logger is part of the logging configuration provided with Strimzi. By default, it is set to INFO.

Note
 When investigating an issue with the operator, it’s usually sufficient to change the rootLogger to DEBUG to get more detailed logs. However, keep in mind that setting the log level to DEBUG may result in a large amount of log output and may have performance implications.
External logging
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
  zookeeper:
    # ...
  entityOperator:
    # ...
    topicOperator:
      watchedNamespace: my-topic-namespace
      reconciliationIntervalSeconds: 60
      logging:
        type: external
        valueFrom:
          configMapKeyRef:
            name: customConfigMap
            key: topic-operator-log4j2.properties
  # ...
Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

47.2. EntityTopicOperatorSpec schema properties

Property Description

watchedNamespace

The namespace the Topic Operator should watch.

string

image

The image to use for the Topic Operator.

string

reconciliationIntervalSeconds

Interval between periodic reconciliations.

integer

zookeeperSessionTimeoutSeconds

Timeout for the ZooKeeper session.

integer

startupProbe

Pod startup checking.

Probe

livenessProbe

Pod liveness checking.

Probe

readinessProbe

Pod readiness checking.

Probe

resources

CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.

ResourceRequirements

topicMetadataMaxAttempts

The number of attempts at getting topic metadata.

integer

logging

Logging configuration. The type depends on the value of the logging.type property within the given object, which must be one of [inline, external].

InlineLogging, ExternalLogging

jvmOptions

JVM Options for pods.

JvmOptions

48. EntityUserOperatorSpec schema reference

Used in: EntityOperatorSpec

Full list of EntityUserOperatorSpec schema properties

Configures the User Operator.

48.1. logging

The User Operator has a configurable logger:

  • rootLogger.level

The User Operator uses the Apache log4j2 logger implementation.

Use the logging property in the entityOperator.userOperator field of the Kafka resource to configure loggers and logger levels.

You can set the log levels by specifying the logger and level directly (inline) or use a custom (external) ConfigMap. If a ConfigMap is used, you set logging.valueFrom.configMapKeyRef.name property to the name of the ConfigMap containing the external logging configuration. Inside the ConfigMap, the logging configuration is described using log4j2.properties. Both logging.valueFrom.configMapKeyRef.name and logging.valueFrom.configMapKeyRef.key properties are mandatory. A ConfigMap using the exact logging configuration specified is created with the custom resource when the Cluster Operator is running, then recreated after each reconciliation. If you do not specify a custom ConfigMap, default logging settings are used. If a specific logger value is not set, upper-level logger settings are inherited for that logger. For more information about log levels, see Apache logging services.

Here we see examples of inline and external logging. The inline logging specifies the rootLogger.level. You can also set log levels for specific classes or loggers by adding them to the loggers property.

Inline logging
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
  zookeeper:
    # ...
  entityOperator:
    # ...
    userOperator:
      watchedNamespace: my-topic-namespace
      reconciliationIntervalSeconds: 60
      logging:
        type: inline
        loggers:
          rootLogger.level: INFO
          logger.uop.name: io.strimzi.operator.user # (1)
          logger.uop.level: DEBUG # (2)
          logger.abstractcache.name: io.strimzi.operator.user.operator.cache.AbstractCache # (3)
          logger.abstractcache.level: TRACE # (4)
          logger.jetty.level: DEBUG # (5)

  # ...

  1. Creates a logger for the user package.

  2. Sets the logging level for the user package.

  3. Creates a logger for the AbstractCache class.

  4. Sets the logging level for the AbstractCache class.

  5. Changes the logging level for the default jetty logger. The jetty logger is part of the logging configuration provided with Strimzi. By default, it is set to INFO.

Note
 When investigating an issue with the operator, it’s usually sufficient to change the rootLogger to DEBUG to get more detailed logs. However, keep in mind that setting the log level to DEBUG may result in a large amount of log output and may have performance implications.
External logging
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
  zookeeper:
    # ...
  entityOperator:
    # ...
    userOperator:
      watchedNamespace: my-topic-namespace
      reconciliationIntervalSeconds: 60
      logging:
        type: external
        valueFrom:
          configMapKeyRef:
            name: customConfigMap
            key: user-operator-log4j2.properties
   # ...
Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

48.2. EntityUserOperatorSpec schema properties

Property Description

watchedNamespace

The namespace the User Operator should watch.

string

image

The image to use for the User Operator.

string

reconciliationIntervalSeconds

Interval between periodic reconciliations.

integer

zookeeperSessionTimeoutSeconds

The zookeeperSessionTimeoutSeconds property has been deprecated. This property has been deprecated because ZooKeeper is not used anymore by the User Operator. Timeout for the ZooKeeper session.

integer

secretPrefix

The prefix that will be added to the KafkaUser name to be used as the Secret name.

string

livenessProbe

Pod liveness checking.

Probe

readinessProbe

Pod readiness checking.

Probe

resources

CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.

ResourceRequirements

logging

Logging configuration. The type depends on the value of the logging.type property within the given object, which must be one of [inline, external].

InlineLogging, ExternalLogging

jvmOptions

JVM Options for pods.

JvmOptions

49. TlsSidecar schema reference

Used in: CruiseControlSpec, EntityOperatorSpec

Full list of TlsSidecar schema properties

Configures a TLS sidecar, which is a container that runs in a pod, but serves a supporting purpose. In Strimzi, the TLS sidecar uses TLS to encrypt and decrypt communication between components and ZooKeeper.

The TLS sidecar is used in the Entity Operator.

The TLS sidecar is configured using the tlsSidecar property in Kafka.spec.entityOperator.

The TLS sidecar supports the following additional options:

  • image

  • resources

  • logLevel

  • readinessProbe

  • livenessProbe

The resources property specifies the memory and CPU resources allocated for the TLS sidecar.

The image property configures the container image which will be used.

The readinessProbe and livenessProbe properties configure healthcheck probes for the TLS sidecar.

The logLevel property specifies the logging level. The following logging levels are supported:

  • emerg

  • alert

  • crit

  • err

  • warning

  • notice

  • info

  • debug

The default value is notice.

Example TLS sidecar configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  # ...
  entityOperator:
    # ...
    tlsSidecar:
      resources:
        requests:
          cpu: 200m
          memory: 64Mi
        limits:
          cpu: 500m
          memory: 128Mi
    # ...

49.1. TlsSidecar schema properties

Property Description

image

The docker image for the container.

string

livenessProbe

Pod liveness checking.

Probe

logLevel

The log level for the TLS sidecar. Default value is notice.

string (one of [emerg, debug, crit, err, alert, warning, notice, info])

readinessProbe

Pod readiness checking.

Probe

resources

CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.

ResourceRequirements

50. EntityOperatorTemplate schema reference

Used in: EntityOperatorSpec

Property Description

deployment

Template for Entity Operator Deployment.

DeploymentTemplate

pod

Template for Entity Operator Pods.

PodTemplate

topicOperatorContainer

Template for the Entity Topic Operator container.

ContainerTemplate

userOperatorContainer

Template for the Entity User Operator container.

ContainerTemplate

tlsSidecarContainer

Template for the Entity Operator TLS sidecar container.

ContainerTemplate

serviceAccount

Template for the Entity Operator service account.

ResourceTemplate

entityOperatorRole

Template for the Entity Operator Role.

ResourceTemplate

topicOperatorRoleBinding

Template for the Entity Topic Operator RoleBinding.

ResourceTemplate

userOperatorRoleBinding

Template for the Entity Topic Operator RoleBinding.

ResourceTemplate

51. DeploymentTemplate schema reference

Used in: CruiseControlTemplate, EntityOperatorTemplate, JmxTransTemplate, KafkaBridgeTemplate, KafkaConnectTemplate, KafkaExporterTemplate, KafkaMirrorMakerTemplate

Full list of DeploymentTemplate schema properties

Use deploymentStrategy to specify the strategy used to replace old pods with new ones when deployment configuration changes.

Use one of the following values:

  • RollingUpdate: Pods are restarted with zero downtime.

  • Recreate: Pods are terminated before new ones are created.

Using the Recreate deployment strategy has the advantage of not requiring spare resources, but the disadvantage is the application downtime.

Example showing the deployment strategy set to Recreate.
# ...
template:
  deployment:
    deploymentStrategy: Recreate
# ...

This configuration change does not cause a rolling update.

51.1. DeploymentTemplate schema properties

Property Description

metadata

Metadata applied to the resource.

MetadataTemplate

deploymentStrategy

Pod replacement strategy for deployment configuration changes. Valid values are RollingUpdate and Recreate. Defaults to RollingUpdate.

string (one of [RollingUpdate, Recreate])

52. CertificateAuthority schema reference

Used in: KafkaSpec

Configuration of how TLS certificates are used within the cluster. This applies to certificates used for both internal communication within the cluster and to certificates used for client access via Kafka.spec.kafka.listeners.tls.

Property Description

generateCertificateAuthority

If true then Certificate Authority certificates will be generated automatically. Otherwise the user will need to provide a Secret with the CA certificate. Default is true.

boolean

generateSecretOwnerReference

If true, the Cluster and Client CA Secrets are configured with the ownerReference set to the Kafka resource. If the Kafka resource is deleted when true, the CA Secrets are also deleted. If false, the ownerReference is disabled. If the Kafka resource is deleted when false, the CA Secrets are retained and available for reuse. Default is true.

boolean

validityDays

The number of days generated certificates should be valid for. The default is 365.

integer

renewalDays

The number of days in the certificate renewal period. This is the number of days before the a certificate expires during which renewal actions may be performed. When generateCertificateAuthority is true, this will cause the generation of a new certificate. When generateCertificateAuthority is true, this will cause extra logging at WARN level about the pending certificate expiry. Default is 30.

integer

certificateExpirationPolicy

How should CA certificate expiration be handled when generateCertificateAuthority=true. The default is for a new CA certificate to be generated reusing the existing private key.

string (one of [replace-key, renew-certificate])

53. CruiseControlSpec schema reference

Used in: KafkaSpec

Full list of CruiseControlSpec schema properties

Configures a Cruise Control cluster.

Configuration options relate to:

  • Goals configuration

  • Capacity limits for resource distribution goals

53.1. config

Use the config properties to configure Cruise Control options as keys.

The values can be one of the following JSON types:

  • String

  • Number

  • Boolean

Exceptions

You can specify and configure the options listed in the Cruise Control documentation.

However, Strimzi takes care of configuring and managing options related to the following, which cannot be changed:

  • Security (encryption, authentication, and authorization)

  • Connection to the Kafka cluster

  • Client ID configuration

  • ZooKeeper connectivity

  • Web server configuration

  • Self healing

Properties with the following prefixes cannot be set:

  • bootstrap.servers

  • capacity.config.file

  • client.id

  • failed.brokers.zk.path

  • kafka.broker.failure.detection.enable

  • metric.reporter.sampler.bootstrap.servers

  • network.

  • request.reason.required

  • security.

  • self.healing.

  • ssl.

  • topic.config.provider.class

  • two.step.

  • webserver.accesslog.

  • webserver.api.urlprefix

  • webserver.http.

  • webserver.session.path

  • zookeeper.

If the config property contains an option that cannot be changed, it is disregarded, and a warning message is logged to the Cluster Operator log file. All other supported options are forwarded to Cruise Control, including the following exceptions to the options configured by Strimzi:

Example Cruise Control configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  # ...
  cruiseControl:
    # ...
    config:
      # Note that `default.goals` (superset) must also include all `hard.goals` (subset)
      default.goals: >
        com.linkedin.kafka.cruisecontrol.analyzer.goals.RackAwareGoal,
        com.linkedin.kafka.cruisecontrol.analyzer.goals.ReplicaCapacityGoal
      hard.goals: >
        com.linkedin.kafka.cruisecontrol.analyzer.goals.RackAwareGoal
      cpu.balance.threshold: 1.1
      metadata.max.age.ms: 300000
      send.buffer.bytes: 131072
      webserver.http.cors.enabled: true
      webserver.http.cors.origin: "*"
      webserver.http.cors.exposeheaders: "User-Task-ID,Content-Type"
    # ...

53.2. Cross-Origin Resource Sharing (CORS)

Cross-Origin Resource Sharing (CORS) is a HTTP mechanism for controlling access to REST APIs. Restrictions can be on access methods or originating URLs of client applications. You can enable CORS with Cruise Control using the webserver.http.cors.enabled property in the config. When enabled, CORS permits read access to the Cruise Control REST API from applications that have different originating URLs than Strimzi. This allows applications from specified origins to use GET requests to fetch information about the Kafka cluster through the Cruise Control API. For example, applications can fetch information on the current cluster load or the most recent optimization proposal. POST requests are not permitted.

Note
 For more information on using CORS with Cruise Control, see REST APIs in the Cruise Control Wiki.
Enabling CORS for Cruise Control

You enable and configure CORS in Kafka.spec.cruiseControl.config.

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  # ...
  cruiseControl:
    # ...
    config:
      webserver.http.cors.enabled: true # (1)
      webserver.http.cors.origin: "*" # (2)
      webserver.http.cors.exposeheaders: "User-Task-ID,Content-Type" # (3)

    # ...

  1. Enables CORS.

  2. Specifies permitted origins for the Access-Control-Allow-Origin HTTP response header. You can use a wildcard or specify a single origin as a URL. If you use a wildcard, a response is returned following requests from any origin.

  3. Exposes specified header names for the Access-Control-Expose-Headers HTTP response header. Applications in permitted origins can read responses with the specified headers.

53.3. Cruise Control REST API security

The Cruise Control REST API is secured with HTTP Basic authentication and SSL to protect the cluster against potentially destructive Cruise Control operations, such as decommissioning Kafka brokers. We recommend that Cruise Control in Strimzi is only used with these settings enabled.

However, it is possible to disable these settings by specifying the following Cruise Control configuration:

  • To disable the built-in HTTP Basic authentication, set webserver.security.enable to false.

  • To disable the built-in SSL, set webserver.ssl.enable to false.

Cruise Control configuration to disable API authorization, authentication, and SSL
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  # ...
  cruiseControl:
    config:
      webserver.security.enable: false
      webserver.ssl.enable: false
# ...

53.4. brokerCapacity

Cruise Control uses capacity limits to determine if optimization goals for resource capacity limits are being broken. There are four goals of this type:

  • DiskCapacityGoal - Disk utilization capacity

  • CpuCapacityGoal - CPU utilization capacity

  • NetworkInboundCapacityGoal - Network inbound utilization capacity

  • NetworkOutboundCapacityGoal - Network outbound utilization capacity

You specify capacity limits for Kafka broker resources in the brokerCapacity property in Kafka.spec.cruiseControl . They are enabled by default and you can change their default values. Capacity limits can be set for the following broker resources:

  • cpu - CPU resource in millicores or CPU cores (Default: 1)

  • inboundNetwork - Inbound network throughput in byte units per second (Default: 10000KiB/s)

  • outboundNetwork - Outbound network throughput in byte units per second (Default: 10000KiB/s)

For network throughput, use an integer value with standard Kubernetes byte units (K, M, G) or their bibyte (power of two) equivalents (Ki, Mi, Gi) per second.

Note
 Disk and CPU capacity limits are automatically generated by Strimzi, so you do not need to set them. In order to guarantee accurate rebalance proposals when using CPU goals, you can set CPU requests equal to CPU limits in Kafka.spec.kafka.resources. That way, all CPU resources are reserved upfront and are always available. This configuration allows Cruise Control to properly evaluate the CPU utilization when preparing the rebalance proposals based on CPU goals. In cases where you cannot set CPU requests equal to CPU limits in Kafka.spec.kafka.resources, you can set the CPU capacity manually for the same accuracy.
Example Cruise Control brokerCapacity configuration using bibyte units
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  # ...
  cruiseControl:
    # ...
    brokerCapacity:
      cpu: "2"
      inboundNetwork: 10000KiB/s
      outboundNetwork: 10000KiB/s
    # ...

53.5. Capacity overrides

Brokers might be running on nodes with heterogeneous network or CPU resources. If that’s the case, specify overrides that set the network capacity and CPU limits for each broker. The overrides ensure an accurate rebalance between the brokers. Override capacity limits can be set for the following broker resources:

  • cpu - CPU resource in millicores or CPU cores (Default: 1)

  • inboundNetwork - Inbound network throughput in byte units per second (Default: 10000KiB/s)

  • outboundNetwork - Outbound network throughput in byte units per second (Default: 10000KiB/s)

An example of Cruise Control capacity overrides configuration using bibyte units
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  # ...
  cruiseControl:
    # ...
    brokerCapacity:
      cpu: "1"
      inboundNetwork: 10000KiB/s
      outboundNetwork: 10000KiB/s
      overrides:
      - brokers: [0]
        cpu: "2.755"
        inboundNetwork: 20000KiB/s
        outboundNetwork: 20000KiB/s
      - brokers: [1, 2]
        cpu: 3000m
        inboundNetwork: 30000KiB/s
        outboundNetwork: 30000KiB/s

For more information, refer to the BrokerCapacity schema reference.

53.6. logging

Cruise Control has its own configurable logger:

  • rootLogger.level

Cruise Control uses the Apache log4j2 logger implementation.

Use the logging property to configure loggers and logger levels.

You can set the log levels by specifying the logger and level directly (inline) or use a custom (external) ConfigMap. If a ConfigMap is used, you set logging.valueFrom.configMapKeyRef.name property to the name of the ConfigMap containing the external logging configuration. Inside the ConfigMap, the logging configuration is described using log4j.properties. Both logging.valueFrom.configMapKeyRef.name and logging.valueFrom.configMapKeyRef.key properties are mandatory. A ConfigMap using the exact logging configuration specified is created with the custom resource when the Cluster Operator is running, then recreated after each reconciliation. If you do not specify a custom ConfigMap, default logging settings are used. If a specific logger value is not set, upper-level logger settings are inherited for that logger.

Here we see examples of inline and external logging. The inline logging specifies the root logger level. You can also set log levels for specific classes or loggers by adding them to the loggers property.

Inline logging
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
# ...
spec:
  cruiseControl:
    # ...
    logging:
      type: inline
      loggers:
        rootLogger.level: INFO
        logger.exec.name: com.linkedin.kafka.cruisecontrol.executor.Executor # (1)
        logger.exec.level: TRACE # (2)
        logger.go.name: com.linkedin.kafka.cruisecontrol.analyzer.GoalOptimizer # (3)
        logger.go.level: DEBUG # (4)
    # ...

  1. Creates a logger for the Cruise Control Executor class.

  2. Sets the logging level for the Executor class.

  3. Creates a logger for the Cruise Control GoalOptimizer class.

  4. Sets the logging level for the GoalOptimizer class.

Note
 When investigating an issue with Cruise Control, it’s usually sufficient to change the rootLogger to DEBUG to get more detailed logs. However, keep in mind that setting the log level to DEBUG may result in a large amount of log output and may have performance implications.
External logging
apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
# ...
spec:
  cruiseControl:
    # ...
    logging:
      type: external
      valueFrom:
        configMapKeyRef:
          name: customConfigMap
          key: cruise-control-log4j.properties
    # ...
Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

53.7. CruiseControlSpec schema properties

Property Description

image

The docker image for the pods.

string

tlsSidecar

The tlsSidecar property has been deprecated. TLS sidecar configuration.

TlsSidecar

resources

CPU and memory resources to reserve for the Cruise Control container. For more information, see the external documentation for core/v1 resourcerequirements.

ResourceRequirements

livenessProbe

Pod liveness checking for the Cruise Control container.

Probe

readinessProbe

Pod readiness checking for the Cruise Control container.

Probe

jvmOptions

JVM Options for the Cruise Control container.

JvmOptions

logging

Logging configuration (Log4j 2) for Cruise Control. The type depends on the value of the logging.type property within the given object, which must be one of [inline, external].

InlineLogging, ExternalLogging

template

Template to specify how Cruise Control resources, Deployments and Pods, are generated.

CruiseControlTemplate

brokerCapacity

The Cruise Control brokerCapacity configuration.

BrokerCapacity

config

The Cruise Control configuration. For a full list of configuration options refer to https://github.com/linkedin/cruise-control/wiki/Configurations. Note that properties with the following prefixes cannot be set: bootstrap.servers, client.id, zookeeper., network., security., failed.brokers.zk.path,webserver.http., webserver.api.urlprefix, webserver.session.path, webserver.accesslog., two.step., request.reason.required,metric.reporter.sampler.bootstrap.servers, capacity.config.file, self.healing., ssl., kafka.broker.failure.detection.enable, topic.config.provider.class (with the exception of: ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols, webserver.http.cors.enabled, webserver.http.cors.origin, webserver.http.cors.exposeheaders, webserver.security.enable, webserver.ssl.enable).

map

metricsConfig

Metrics configuration. The type depends on the value of the metricsConfig.type property within the given object, which must be one of [jmxPrometheusExporter].

JmxPrometheusExporterMetrics

54. CruiseControlTemplate schema reference

Used in: CruiseControlSpec

Property Description

deployment

Template for Cruise Control Deployment.

DeploymentTemplate

pod

Template for Cruise Control Pods.

PodTemplate

apiService

Template for Cruise Control API Service.

InternalServiceTemplate

podDisruptionBudget

Template for Cruise Control PodDisruptionBudget.

PodDisruptionBudgetTemplate

cruiseControlContainer

Template for the Cruise Control container.

ContainerTemplate

tlsSidecarContainer

The tlsSidecarContainer property has been deprecated. Template for the Cruise Control TLS sidecar container.

ContainerTemplate

serviceAccount

Template for the Cruise Control service account.

ResourceTemplate

55. BrokerCapacity schema reference

Used in: CruiseControlSpec

Property Description

disk

The disk property has been deprecated. The Cruise Control disk capacity setting has been deprecated, is ignored, and will be removed in the future Broker capacity for disk in bytes. Use a number value with either standard Kubernetes byte units (K, M, G, or T), their bibyte (power of two) equivalents (Ki, Mi, Gi, or Ti), or a byte value with or without E notation. For example, 100000M, 100000Mi, 104857600000, or 1e+11.

string

cpuUtilization

The cpuUtilization property has been deprecated. The Cruise Control CPU capacity setting has been deprecated, is ignored, and will be removed in the future Broker capacity for CPU resource utilization as a percentage (0 - 100).

integer

cpu

Broker capacity for CPU resource in cores or millicores. For example, 1, 1.500, 1500m. For more information on valid CPU resource units see https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/#meaning-of-cpu.

string

inboundNetwork

Broker capacity for inbound network throughput in bytes per second. Use an integer value with standard Kubernetes byte units (K, M, G) or their bibyte (power of two) equivalents (Ki, Mi, Gi) per second. For example, 10000KiB/s.

string

outboundNetwork

Broker capacity for outbound network throughput in bytes per second. Use an integer value with standard Kubernetes byte units (K, M, G) or their bibyte (power of two) equivalents (Ki, Mi, Gi) per second. For example, 10000KiB/s.

string

overrides

Overrides for individual brokers. The overrides property lets you specify a different capacity configuration for different brokers.

BrokerCapacityOverride array

56. BrokerCapacityOverride schema reference

Used in: BrokerCapacity

Property Description

brokers

List of Kafka brokers (broker identifiers).

integer array

cpu

Broker capacity for CPU resource in cores or millicores. For example, 1, 1.500, 1500m. For more information on valid CPU resource units see https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/#meaning-of-cpu.

string

inboundNetwork

Broker capacity for inbound network throughput in bytes per second. Use an integer value with standard Kubernetes byte units (K, M, G) or their bibyte (power of two) equivalents (Ki, Mi, Gi) per second. For example, 10000KiB/s.

string

outboundNetwork

Broker capacity for outbound network throughput in bytes per second. Use an integer value with standard Kubernetes byte units (K, M, G) or their bibyte (power of two) equivalents (Ki, Mi, Gi) per second. For example, 10000KiB/s.

string

57. JmxTransSpec schema reference

The type JmxTransSpec has been deprecated.

Used in: KafkaSpec

Property Description

image

The image to use for the JmxTrans.

string

outputDefinitions

Defines the output hosts that will be referenced later on. For more information on these properties see, JmxTransOutputDefinitionTemplate schema reference.

JmxTransOutputDefinitionTemplate array

logLevel

Sets the logging level of the JmxTrans deployment.For more information see, JmxTrans Logging Level.

string

kafkaQueries

Queries to send to the Kafka brokers to define what data should be read from each broker. For more information on these properties see, JmxTransQueryTemplate schema reference.

JmxTransQueryTemplate array

resources

CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.

ResourceRequirements

template

Template for JmxTrans resources.

JmxTransTemplate

58. JmxTransOutputDefinitionTemplate schema reference

Used in: JmxTransSpec

Property Description

outputType

Template for setting the format of the data that will be pushed.For more information see JmxTrans OutputWriters.

string

host

The DNS/hostname of the remote host that the data is pushed to.

string

port

The port of the remote host that the data is pushed to.

integer

flushDelayInSeconds

How many seconds the JmxTrans waits before pushing a new set of data out.

integer

typeNames

Template for filtering data to be included in response to a wildcard query. For more information see JmxTrans queries.

string array

name

Template for setting the name of the output definition. This is used to identify where to send the results of queries should be sent.

string

59. JmxTransQueryTemplate schema reference

Used in: JmxTransSpec

Property Description

targetMBean

If using wildcards instead of a specific MBean then the data is gathered from multiple MBeans. Otherwise if specifying an MBean then data is gathered from that specified MBean.

string

attributes

Determine which attributes of the targeted MBean should be included.

string array

outputs

List of the names of output definitions specified in the spec.kafka.jmxTrans.outputDefinitions that have defined where JMX metrics are pushed to, and in which data format.

string array

60. JmxTransTemplate schema reference

Used in: JmxTransSpec

Property Description

deployment

Template for JmxTrans Deployment.

DeploymentTemplate

pod

Template for JmxTrans Pods.

PodTemplate

container

Template for JmxTrans container.

ContainerTemplate

serviceAccount

Template for the JmxTrans service account.

ResourceTemplate

61. KafkaExporterSpec schema reference

Used in: KafkaSpec

Property Description

image

The docker image for the pods.

string

groupRegex

Regular expression to specify which consumer groups to collect. Default value is .*.

string

topicRegex

Regular expression to specify which topics to collect. Default value is .*.

string

groupExcludeRegex

Regular expression to specify which consumer groups to exclude.

string

topicExcludeRegex

Regular expression to specify which topics to exclude.

string

resources

CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.

ResourceRequirements

logging

Only log messages with the given severity or above. Valid levels: [info, debug, trace]. Default log level is info.

string

enableSaramaLogging

Enable Sarama logging, a Go client library used by the Kafka Exporter.

boolean

template

Customization of deployment templates and pods.

KafkaExporterTemplate

livenessProbe

Pod liveness check.

Probe

readinessProbe

Pod readiness check.

Probe

62. KafkaExporterTemplate schema reference

Used in: KafkaExporterSpec

Property Description

deployment

Template for Kafka Exporter Deployment.

DeploymentTemplate

pod

Template for Kafka Exporter Pods.

PodTemplate

service

The service property has been deprecated. The Kafka Exporter service has been removed. Template for Kafka Exporter Service.

ResourceTemplate

container

Template for the Kafka Exporter container.

ContainerTemplate

serviceAccount

Template for the Kafka Exporter service account.

ResourceTemplate

63. KafkaStatus schema reference

Used in: Kafka

Property Description

conditions

List of status conditions.

Condition array

observedGeneration

The generation of the CRD that was last reconciled by the operator.

integer

listeners

Addresses of the internal and external listeners.

ListenerStatus array

kafkaNodePools

List of the KafkaNodePools used by this Kafka cluster.

UsedNodePoolStatus array

clusterId

Kafka cluster Id.

string

64. Condition schema reference

Used in: KafkaBridgeStatus, KafkaConnectorStatus, KafkaConnectStatus, KafkaMirrorMaker2Status, KafkaMirrorMakerStatus, KafkaNodePoolStatus, KafkaRebalanceStatus, KafkaStatus, KafkaTopicStatus, KafkaUserStatus, StrimziPodSetStatus

Property Description

type

The unique identifier of a condition, used to distinguish between other conditions in the resource.

string

status

The status of the condition, either True, False or Unknown.

string

lastTransitionTime

Last time the condition of a type changed from one status to another. The required format is 'yyyy-MM-ddTHH:mm:ssZ', in the UTC time zone.

string

reason

The reason for the condition’s last transition (a single word in CamelCase).

string

message

Human-readable message indicating details about the condition’s last transition.

string

65. ListenerStatus schema reference

Used in: KafkaStatus

Property Description

type

The type property has been deprecated, and should now be configured using name. The name of the listener.

string

name

The name of the listener.

string

addresses

A list of the addresses for this listener.

ListenerAddress array

bootstrapServers

A comma-separated list of host:port pairs for connecting to the Kafka cluster using this listener.

string

certificates

A list of TLS certificates which can be used to verify the identity of the server when connecting to the given listener. Set only for tls and external listeners.

string array

66. ListenerAddress schema reference

Used in: ListenerStatus

Property Description

host

The DNS name or IP address of the Kafka bootstrap service.

string

port

The port of the Kafka bootstrap service.

integer

67. UsedNodePoolStatus schema reference

Used in: KafkaStatus

Property Description

name

The name of the KafkaNodePool used by this Kafka resource.

string

68. KafkaConnect schema reference

Property Description

spec

The specification of the Kafka Connect cluster.

KafkaConnectSpec

status

The status of the Kafka Connect cluster.

KafkaConnectStatus

69. KafkaConnectSpec schema reference

Used in: KafkaConnect

Full list of KafkaConnectSpec schema properties

Configures a Kafka Connect cluster.

69.1. config

Use the config properties to configure Kafka Connect options as keys.

The values can be one of the following JSON types:

  • String

  • Number

  • Boolean

Certain options have default values:

  • group.id with default value connect-cluster

  • offset.storage.topic with default value connect-cluster-offsets

  • config.storage.topic with default value connect-cluster-configs

  • status.storage.topic with default value connect-cluster-status

  • key.converter with default value org.apache.kafka.connect.json.JsonConverter

  • value.converter with default value org.apache.kafka.connect.json.JsonConverter

These options are automatically configured in case they are not present in the KafkaConnect.spec.config properties.

Exceptions

You can specify and configure the options listed in the Apache Kafka documentation.

However, Strimzi takes care of configuring and managing options related to the following, which cannot be changed:

  • Kafka cluster bootstrap address

  • Security (encryption, authentication, and authorization)

  • Listener and REST interface configuration

  • Plugin path configuration

Properties with the following prefixes cannot be set:

  • bootstrap.servers

  • consumer.interceptor.classes

  • listeners.

  • plugin.path

  • producer.interceptor.classes

  • rest.

  • sasl.

  • security.

  • ssl.

If the config property contains an option that cannot be changed, it is disregarded, and a warning message is logged to the Cluster Operator log file. All other supported options are forwarded to Kafka Connect, including the following exceptions to the options configured by Strimzi:

Example Kafka Connect configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect
spec:
  # ...
  config:
    group.id: my-connect-cluster
    offset.storage.topic: my-connect-cluster-offsets
    config.storage.topic: my-connect-cluster-configs
    status.storage.topic: my-connect-cluster-status
    key.converter: org.apache.kafka.connect.json.JsonConverter
    value.converter: org.apache.kafka.connect.json.JsonConverter
    key.converter.schemas.enable: true
    value.converter.schemas.enable: true
    config.storage.replication.factor: 3
    offset.storage.replication.factor: 3
    status.storage.replication.factor: 3
  # ...
Important
 The Cluster Operator does not validate keys or values in the config object provided. If an invalid configuration is provided, the Kafka Connect cluster might not start or might become unstable. In this case, fix the configuration so that the Cluster Operator can roll out the new configuration to all Kafka Connect nodes.

69.2. logging

Kafka Connect has its own configurable loggers:

  • connect.root.logger.level

  • log4j.logger.org.reflections

Further loggers are added depending on the Kafka Connect plugins running.

Use a curl request to get a complete list of Kafka Connect loggers running from any Kafka broker pod:

curl -s http://<connect-cluster-name>-connect-api:8083/admin/loggers/

Kafka Connect uses the Apache log4j logger implementation.

Use the logging property to configure loggers and logger levels.

You can set the log levels by specifying the logger and level directly (inline) or use a custom (external) ConfigMap. If a ConfigMap is used, you set logging.valueFrom.configMapKeyRef.name property to the name of the ConfigMap containing the external logging configuration. Inside the ConfigMap, the logging configuration is described using log4j.properties. Both logging.valueFrom.configMapKeyRef.name and logging.valueFrom.configMapKeyRef.key properties are mandatory. A ConfigMap using the exact logging configuration specified is created with the custom resource when the Cluster Operator is running, then recreated after each reconciliation. If you do not specify a custom ConfigMap, default logging settings are used. If a specific logger value is not set, upper-level logger settings are inherited for that logger. For more information about log levels, see Apache logging services.

Here we see examples of inline and external logging. The inline logging specifies the root logger level. You can also set log levels for specific classes or loggers by adding them to the loggers property.

Inline logging
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
spec:
  # ...
  logging:
    type: inline
    loggers:
      connect.root.logger.level: INFO
      log4j.logger.org.apache.kafka.connect.runtime.WorkerSourceTask: TRACE
      log4j.logger.org.apache.kafka.connect.runtime.WorkerSinkTask: DEBUG
  # ...
Note
 Setting a log level to DEBUG may result in a large amount of log output and may have performance implications.
External logging
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
spec:
  # ...
  logging:
    type: external
    valueFrom:
      configMapKeyRef:
        name: customConfigMap
        key: connect-logging.log4j
  # ...

Any available loggers that are not configured have their level set to OFF.

If Kafka Connect was deployed using the Cluster Operator, changes to Kafka Connect logging levels are applied dynamically.

If you use external logging, a rolling update is triggered when logging appenders are changed.

Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

69.3. KafkaConnectSpec schema properties

Property Description

version

The Kafka Connect version. Defaults to 3.5.0. Consult the user documentation to understand the process required to upgrade or downgrade the version.

string

replicas

The number of pods in the Kafka Connect group. Defaults to 3.

integer

image

The docker image for the pods.

string

bootstrapServers

Bootstrap servers to connect to. This should be given as a comma separated list of <hostname>:_<port>_ pairs.

string

tls

TLS configuration.

ClientTls

authentication

Authentication configuration for Kafka Connect. The type depends on the value of the authentication.type property within the given object, which must be one of [tls, scram-sha-256, scram-sha-512, plain, oauth].

KafkaClientAuthenticationTls, KafkaClientAuthenticationScramSha256, KafkaClientAuthenticationScramSha512, KafkaClientAuthenticationPlain, KafkaClientAuthenticationOAuth

config

The Kafka Connect configuration. Properties with the following prefixes cannot be set: ssl., sasl., security., listeners, plugin.path, rest., bootstrap.servers, consumer.interceptor.classes, producer.interceptor.classes (with the exception of: ssl.endpoint.identification.algorithm, ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols).

map

resources

The maximum limits for CPU and memory resources and the requested initial resources. For more information, see the external documentation for core/v1 resourcerequirements.

ResourceRequirements

livenessProbe

Pod liveness checking.

Probe

readinessProbe

Pod readiness checking.

Probe

jvmOptions

JVM Options for pods.

JvmOptions

jmxOptions

JMX Options.

KafkaJmxOptions

logging

Logging configuration for Kafka Connect. The type depends on the value of the logging.type property within the given object, which must be one of [inline, external].

InlineLogging, ExternalLogging

clientRackInitImage

The image of the init container used for initializing the client.rack.

string

rack

Configuration of the node label which will be used as the client.rack consumer configuration.

Rack

tracing

The configuration of tracing in Kafka Connect. The type depends on the value of the tracing.type property within the given object, which must be one of [jaeger, opentelemetry].

JaegerTracing, OpenTelemetryTracing

template

Template for Kafka Connect and Kafka Mirror Maker 2 resources. The template allows users to specify how the Deployment, Pods and Service are generated.

KafkaConnectTemplate

externalConfiguration

Pass data from Secrets or ConfigMaps to the Kafka Connect pods and use them to configure connectors.

ExternalConfiguration

build

Configures how the Connect container image should be built. Optional.

Build

metricsConfig

Metrics configuration. The type depends on the value of the metricsConfig.type property within the given object, which must be one of [jmxPrometheusExporter].

JmxPrometheusExporterMetrics

70. ClientTls schema reference

Used in: KafkaBridgeSpec, KafkaConnectSpec, KafkaMirrorMaker2ClusterSpec, KafkaMirrorMakerConsumerSpec, KafkaMirrorMakerProducerSpec

Full list of ClientTls schema properties

Configures TLS trusted certificates for connecting KafkaConnect, KafkaBridge, KafkaMirror, KafkaMirrorMaker2 to the cluster.

70.1. trustedCertificates

Provide a list of secrets using the trustedCertificates property.

70.2. ClientTls schema properties

Property Description

trustedCertificates

Trusted certificates for TLS connection.

CertSecretSource array

71. KafkaClientAuthenticationTls schema reference

Used in: KafkaBridgeSpec, KafkaConnectSpec, KafkaMirrorMaker2ClusterSpec, KafkaMirrorMakerConsumerSpec, KafkaMirrorMakerProducerSpec

Full list of KafkaClientAuthenticationTls schema properties

To configure mTLS authentication, set the type property to the value tls. mTLS uses a TLS certificate to authenticate.

71.1. certificateAndKey

The certificate is specified in the certificateAndKey property and is always loaded from a Kubernetes secret. In the secret, the certificate must be stored in X509 format under two different keys: public and private.

You can use the secrets created by the User Operator, or you can create your own TLS certificate file, with the keys used for authentication, then create a Secret from the file:

kubectl create secret generic MY-SECRET \
--from-file=MY-PUBLIC-TLS-CERTIFICATE-FILE.crt \
--from-file=MY-PRIVATE.key
Note
 mTLS authentication can only be used with TLS connections.
Example mTLS configuration
authentication:
  type: tls
  certificateAndKey:
    secretName: my-secret
    certificate: my-public-tls-certificate-file.crt
    key: private.key

71.2. KafkaClientAuthenticationTls schema properties

The type property is a discriminator that distinguishes use of the KafkaClientAuthenticationTls type from KafkaClientAuthenticationScramSha256, KafkaClientAuthenticationScramSha512, KafkaClientAuthenticationPlain, KafkaClientAuthenticationOAuth. It must have the value tls for the type KafkaClientAuthenticationTls.

Property Description

certificateAndKey

Reference to the Secret which holds the certificate and private key pair.

CertAndKeySecretSource

type

Must be tls.

string

72. KafkaClientAuthenticationScramSha256 schema reference

Used in: KafkaBridgeSpec, KafkaConnectSpec, KafkaMirrorMaker2ClusterSpec, KafkaMirrorMakerConsumerSpec, KafkaMirrorMakerProducerSpec

Full list of KafkaClientAuthenticationScramSha256 schema properties

To configure SASL-based SCRAM-SHA-256 authentication, set the type property to scram-sha-256. The SCRAM-SHA-256 authentication mechanism requires a username and password.

72.1. username

Specify the username in the username property.

72.2. passwordSecret

In the passwordSecret property, specify a link to a Secret containing the password.

You can use the secrets created by the User Operator.

If required, you can create a text file that contains the password, in cleartext, to use for authentication:

echo -n PASSWORD > MY-PASSWORD.txt

You can then create a Secret from the text file, setting your own field name (key) for the password:

kubectl create secret generic MY-CONNECT-SECRET-NAME --from-file=MY-PASSWORD-FIELD-NAME=./MY-PASSWORD.txt
Example Secret for SCRAM-SHA-256 client authentication for Kafka Connect
apiVersion: v1
kind: Secret
metadata:
  name: my-connect-secret-name
type: Opaque
data:
  my-connect-password-field: LFTIyFRFlMmU2N2Tm

The secretName property contains the name of the Secret, and the password property contains the name of the key under which the password is stored inside the Secret.

Important
 Do not specify the actual password in the password property.
Example SASL-based SCRAM-SHA-256 client authentication configuration for Kafka Connect
authentication:
  type: scram-sha-256
  username: my-connect-username
  passwordSecret:
    secretName: my-connect-secret-name
    password: my-connect-password-field

72.3. KafkaClientAuthenticationScramSha256 schema properties

Property Description

passwordSecret

Reference to the Secret which holds the password.

PasswordSecretSource

type

Must be scram-sha-256.

string

username

Username used for the authentication.

string

73. PasswordSecretSource schema reference

Used in: KafkaClientAuthenticationOAuth, KafkaClientAuthenticationPlain, KafkaClientAuthenticationScramSha256, KafkaClientAuthenticationScramSha512

Property Description

password

The name of the key in the Secret under which the password is stored.

string

secretName

The name of the Secret containing the password.

string

74. KafkaClientAuthenticationScramSha512 schema reference

Used in: KafkaBridgeSpec, KafkaConnectSpec, KafkaMirrorMaker2ClusterSpec, KafkaMirrorMakerConsumerSpec, KafkaMirrorMakerProducerSpec

Full list of KafkaClientAuthenticationScramSha512 schema properties

To configure SASL-based SCRAM-SHA-512 authentication, set the type property to scram-sha-512. The SCRAM-SHA-512 authentication mechanism requires a username and password.

74.1. username

Specify the username in the username property.

74.2. passwordSecret

In the passwordSecret property, specify a link to a Secret containing the password.

You can use the secrets created by the User Operator.

If required, you can create a text file that contains the password, in cleartext, to use for authentication:

echo -n PASSWORD > MY-PASSWORD.txt

You can then create a Secret from the text file, setting your own field name (key) for the password:

kubectl create secret generic MY-CONNECT-SECRET-NAME --from-file=MY-PASSWORD-FIELD-NAME=./MY-PASSWORD.txt
Example Secret for SCRAM-SHA-512 client authentication for Kafka Connect
apiVersion: v1
kind: Secret
metadata:
  name: my-connect-secret-name
type: Opaque
data:
  my-connect-password-field: LFTIyFRFlMmU2N2Tm

The secretName property contains the name of the Secret, and the password property contains the name of the key under which the password is stored inside the Secret.

Important
 Do not specify the actual password in the password property.
Example SASL-based SCRAM-SHA-512 client authentication configuration for Kafka Connect
authentication:
  type: scram-sha-512
  username: my-connect-username
  passwordSecret:
    secretName: my-connect-secret-name
    password: my-connect-password-field

74.3. KafkaClientAuthenticationScramSha512 schema properties

Property Description

passwordSecret

Reference to the Secret which holds the password.

PasswordSecretSource

type

Must be scram-sha-512.

string

username

Username used for the authentication.

string

75. KafkaClientAuthenticationPlain schema reference

Used in: KafkaBridgeSpec, KafkaConnectSpec, KafkaMirrorMaker2ClusterSpec, KafkaMirrorMakerConsumerSpec, KafkaMirrorMakerProducerSpec

Full list of KafkaClientAuthenticationPlain schema properties

To configure SASL-based PLAIN authentication, set the type property to plain. SASL PLAIN authentication mechanism requires a username and password.

Warning
 The SASL PLAIN mechanism will transfer the username and password across the network in cleartext. Only use SASL PLAIN authentication if TLS encryption is enabled.

75.1. username

Specify the username in the username property.

75.2. passwordSecret

In the passwordSecret property, specify a link to a Secret containing the password.

You can use the secrets created by the User Operator.

If required, create a text file that contains the password, in cleartext, to use for authentication:

echo -n PASSWORD > MY-PASSWORD.txt

You can then create a Secret from the text file, setting your own field name (key) for the password:

kubectl create secret generic MY-CONNECT-SECRET-NAME --from-file=MY-PASSWORD-FIELD-NAME=./MY-PASSWORD.txt
Example Secret for PLAIN client authentication for Kafka Connect
apiVersion: v1
kind: Secret
metadata:
  name: my-connect-secret-name
type: Opaque
data:
  my-password-field-name: LFTIyFRFlMmU2N2Tm

The secretName property contains the name of the Secret and the password property contains the name of the key under which the password is stored inside the Secret.

Important
 Do not specify the actual password in the password property.
An example SASL based PLAIN client authentication configuration
authentication:
  type: plain
  username: my-connect-username
  passwordSecret:
    secretName: my-connect-secret-name
    password: my-password-field-name

75.3. KafkaClientAuthenticationPlain schema properties

The type property is a discriminator that distinguishes use of the KafkaClientAuthenticationPlain type from KafkaClientAuthenticationTls, KafkaClientAuthenticationScramSha256, KafkaClientAuthenticationScramSha512, KafkaClientAuthenticationOAuth. It must have the value plain for the type KafkaClientAuthenticationPlain.

Property Description

passwordSecret

Reference to the Secret which holds the password.

PasswordSecretSource

type

Must be plain.

string

username

Username used for the authentication.

string

76. KafkaClientAuthenticationOAuth schema reference

Used in: KafkaBridgeSpec, KafkaConnectSpec, KafkaMirrorMaker2ClusterSpec, KafkaMirrorMakerConsumerSpec, KafkaMirrorMakerProducerSpec

Full list of KafkaClientAuthenticationOAuth schema properties

To configure OAuth client authentication, set the type property to oauth.

OAuth authentication can be configured using one of the following options:

  • Client ID and secret

  • Client ID and refresh token

  • Access token

  • Username and password

  • TLS

Client ID and secret

You can configure the address of your authorization server in the tokenEndpointUri property together with the client ID and client secret used in authentication. The OAuth client will connect to the OAuth server, authenticate using the client ID and secret and get an access token which it will use to authenticate with the Kafka broker. In the clientSecret property, specify a link to a Secret containing the client secret.

An example of OAuth client authentication using client ID and client secret
authentication:
  type: oauth
  tokenEndpointUri: https://sso.myproject.svc:8443/auth/realms/internal/protocol/openid-connect/token
  clientId: my-client-id
  clientSecret:
    secretName: my-client-oauth-secret
    key: client-secret

Optionally, scope and audience can be specified if needed.

Client ID and refresh token

You can configure the address of your OAuth server in the tokenEndpointUri property together with the OAuth client ID and refresh token. The OAuth client will connect to the OAuth server, authenticate using the client ID and refresh token and get an access token which it will use to authenticate with the Kafka broker. In the refreshToken property, specify a link to a Secret containing the refresh token.

An example of OAuth client authentication using client ID and refresh token
authentication:
  type: oauth
  tokenEndpointUri: https://sso.myproject.svc:8443/auth/realms/internal/protocol/openid-connect/token
  clientId: my-client-id
  refreshToken:
    secretName: my-refresh-token-secret
    key: refresh-token
Access token

You can configure the access token used for authentication with the Kafka broker directly. In this case, you do not specify the tokenEndpointUri. In the accessToken property, specify a link to a Secret containing the access token.

An example of OAuth client authentication using only an access token
authentication:
  type: oauth
  accessToken:
    secretName: my-access-token-secret
    key: access-token
Username and password

OAuth username and password configuration uses the OAuth Resource Owner Password Grant mechanism. The mechanism is deprecated, and is only supported to enable integration in environments where client credentials (ID and secret) cannot be used. You might need to use user accounts if your access management system does not support another approach or user accounts are required for authentication.

A typical approach is to create a special user account in your authorization server that represents your client application. You then give the account a long randomly generated password and a very limited set of permissions. For example, the account can only connect to your Kafka cluster, but is not allowed to use any other services or login to the user interface.

Consider using a refresh token mechanism first.

You can configure the address of your authorization server in the tokenEndpointUri property together with the client ID, username and the password used in authentication. The OAuth client will connect to the OAuth server, authenticate using the username, the password, the client ID, and optionally even the client secret to obtain an access token which it will use to authenticate with the Kafka broker.

In the passwordSecret property, specify a link to a Secret containing the password.

Normally, you also have to configure a clientId using a public OAuth client. If you are using a confidential OAuth client, you also have to configure a clientSecret.

An example of OAuth client authentication using username and a password with a public client
authentication:
  type: oauth
  tokenEndpointUri: https://sso.myproject.svc:8443/auth/realms/internal/protocol/openid-connect/token
  username: my-username
  passwordSecret:
    secretName: my-password-secret-name
    password: my-password-field-name
  clientId: my-public-client-id
An example of OAuth client authentication using a username and a password with a confidential client
authentication:
  type: oauth
  tokenEndpointUri: https://sso.myproject.svc:8443/auth/realms/internal/protocol/openid-connect/token
  username: my-username
  passwordSecret:
    secretName: my-password-secret-name
    password: my-password-field-name
  clientId: my-confidential-client-id
  clientSecret:
    secretName: my-confidential-client-oauth-secret
    key: client-secret

Optionally, scope and audience can be specified if needed.

TLS

Accessing the OAuth server using the HTTPS protocol does not require any additional configuration as long as the TLS certificates used by it are signed by a trusted certification authority and its hostname is listed in the certificate.

If your OAuth server is using certificates which are self-signed or are signed by a certification authority which is not trusted, you can configure a list of trusted certificates in the custom resource. The tlsTrustedCertificates property contains a list of secrets with key names under which the certificates are stored. The certificates must be stored in X509 format.

An example of TLS certificates provided
authentication:
  type: oauth
  tokenEndpointUri: https://sso.myproject.svc:8443/auth/realms/internal/protocol/openid-connect/token
  clientId: my-client-id
  refreshToken:
    secretName: my-refresh-token-secret
    key: refresh-token
  tlsTrustedCertificates:
    - secretName: oauth-server-ca
      certificate: tls.crt

The OAuth client will by default verify that the hostname of your OAuth server matches either the certificate subject or one of the alternative DNS names. If it is not required, you can disable the hostname verification.

An example of disabled TLS hostname verification
authentication:
  type: oauth
  tokenEndpointUri: https://sso.myproject.svc:8443/auth/realms/internal/protocol/openid-connect/token
  clientId: my-client-id
  refreshToken:
    secretName: my-refresh-token-secret
    key: refresh-token
  disableTlsHostnameVerification: true

76.1. KafkaClientAuthenticationOAuth schema properties

The type property is a discriminator that distinguishes use of the KafkaClientAuthenticationOAuth type from KafkaClientAuthenticationTls, KafkaClientAuthenticationScramSha256, KafkaClientAuthenticationScramSha512, KafkaClientAuthenticationPlain. It must have the value oauth for the type KafkaClientAuthenticationOAuth.

Property Description

accessToken

Link to Kubernetes Secret containing the access token which was obtained from the authorization server.

GenericSecretSource

accessTokenIsJwt

Configure whether access token should be treated as JWT. This should be set to false if the authorization server returns opaque tokens. Defaults to true.

boolean

audience

OAuth audience to use when authenticating against the authorization server. Some authorization servers require the audience to be explicitly set. The possible values depend on how the authorization server is configured. By default, audience is not specified when performing the token endpoint request.

string

clientId

OAuth Client ID which the Kafka client can use to authenticate against the OAuth server and use the token endpoint URI.

string

clientSecret

Link to Kubernetes Secret containing the OAuth client secret which the Kafka client can use to authenticate against the OAuth server and use the token endpoint URI.

GenericSecretSource

connectTimeoutSeconds

The connect timeout in seconds when connecting to authorization server. If not set, the effective connect timeout is 60 seconds.

integer

disableTlsHostnameVerification

Enable or disable TLS hostname verification. Default value is false.

boolean

enableMetrics

Enable or disable OAuth metrics. Default value is false.

boolean

httpRetries

The maximum number of retries to attempt if an initial HTTP request fails. If not set, the default is to not attempt any retries.

integer

httpRetryPauseMs

The pause to take before retrying a failed HTTP request. If not set, the default is to not pause at all but to immediately repeat a request.

integer

maxTokenExpirySeconds

Set or limit time-to-live of the access tokens to the specified number of seconds. This should be set if the authorization server returns opaque tokens.

integer

passwordSecret

Reference to the Secret which holds the password.

PasswordSecretSource

readTimeoutSeconds

The read timeout in seconds when connecting to authorization server. If not set, the effective read timeout is 60 seconds.

integer

refreshToken

Link to Kubernetes Secret containing the refresh token which can be used to obtain access token from the authorization server.

GenericSecretSource

scope

OAuth scope to use when authenticating against the authorization server. Some authorization servers require this to be set. The possible values depend on how authorization server is configured. By default scope is not specified when doing the token endpoint request.

string

tlsTrustedCertificates

Trusted certificates for TLS connection to the OAuth server.

CertSecretSource array

tokenEndpointUri

Authorization server token endpoint URI.

string

type

Must be oauth.

string

username

Username used for the authentication.

string

77. JaegerTracing schema reference

The type JaegerTracing has been deprecated.

Used in: KafkaBridgeSpec, KafkaConnectSpec, KafkaMirrorMaker2Spec, KafkaMirrorMakerSpec

The type property is a discriminator that distinguishes use of the JaegerTracing type from OpenTelemetryTracing. It must have the value jaeger for the type JaegerTracing.

Property Description

type

Must be jaeger.

string

78. OpenTelemetryTracing schema reference

Used in: KafkaBridgeSpec, KafkaConnectSpec, KafkaMirrorMaker2Spec, KafkaMirrorMakerSpec

The type property is a discriminator that distinguishes use of the OpenTelemetryTracing type from JaegerTracing. It must have the value opentelemetry for the type OpenTelemetryTracing.

Property Description

type

Must be opentelemetry.

string

79. KafkaConnectTemplate schema reference

Used in: KafkaConnectSpec, KafkaMirrorMaker2Spec

Property Description

deployment

Template for Kafka Connect Deployment.

DeploymentTemplate

podSet

Template for Kafka Connect StrimziPodSet resource.

ResourceTemplate

pod

Template for Kafka Connect Pods.

PodTemplate

apiService

Template for Kafka Connect API Service.

InternalServiceTemplate

headlessService

Template for Kafka Connect headless Service.

InternalServiceTemplate

connectContainer

Template for the Kafka Connect container.

ContainerTemplate

initContainer

Template for the Kafka init container.

ContainerTemplate

podDisruptionBudget

Template for Kafka Connect PodDisruptionBudget.

PodDisruptionBudgetTemplate

serviceAccount

Template for the Kafka Connect service account.

ResourceTemplate

clusterRoleBinding

Template for the Kafka Connect ClusterRoleBinding.

ResourceTemplate

buildPod

Template for Kafka Connect Build Pods. The build pod is used only on Kubernetes.

PodTemplate

buildContainer

Template for the Kafka Connect Build container. The build container is used only on Kubernetes.

ContainerTemplate

buildConfig

Template for the Kafka Connect BuildConfig used to build new container images. The BuildConfig is used only on OpenShift.

BuildConfigTemplate

buildServiceAccount

Template for the Kafka Connect Build service account.

ResourceTemplate

jmxSecret

Template for Secret of the Kafka Connect Cluster JMX authentication.

ResourceTemplate

80. BuildConfigTemplate schema reference

Used in: KafkaConnectTemplate

Property Description

metadata

Metadata to apply to the PodDisruptionBudgetTemplate resource.

MetadataTemplate

pullSecret

Container Registry Secret with the credentials for pulling the base image.

string

81. ExternalConfiguration schema reference

Used in: KafkaConnectSpec, KafkaMirrorMaker2Spec

Full list of ExternalConfiguration schema properties

Configures external storage properties that define configuration options for Kafka Connect connectors.

You can mount ConfigMaps or Secrets into a Kafka Connect pod as environment variables or volumes. Volumes and environment variables are configured in the externalConfiguration property in KafkaConnect.spec or KafkaMirrorMaker2.spec.

When applied, the environment variables and volumes are available for use when developing your connectors.

For more information, see Loading configuration values from external sources.

81.1. ExternalConfiguration schema properties

Property Description

env

Makes data from a Secret or ConfigMap available in the Kafka Connect pods as environment variables.

ExternalConfigurationEnv array

volumes

Makes data from a Secret or ConfigMap available in the Kafka Connect pods as volumes.

ExternalConfigurationVolumeSource array

82. ExternalConfigurationEnv schema reference

Used in: ExternalConfiguration

Property Description

name

Name of the environment variable which will be passed to the Kafka Connect pods. The name of the environment variable cannot start with KAFKA_ or STRIMZI_.

string

valueFrom

Value of the environment variable which will be passed to the Kafka Connect pods. It can be passed either as a reference to Secret or ConfigMap field. The field has to specify exactly one Secret or ConfigMap.

ExternalConfigurationEnvVarSource

83. ExternalConfigurationEnvVarSource schema reference

Used in: ExternalConfigurationEnv

Property Description

configMapKeyRef

Reference to a key in a ConfigMap. For more information, see the external documentation for core/v1 configmapkeyselector.

ConfigMapKeySelector

secretKeyRef

Reference to a key in a Secret. For more information, see the external documentation for core/v1 secretkeyselector.

SecretKeySelector

84. ExternalConfigurationVolumeSource schema reference

Used in: ExternalConfiguration

Property Description

configMap

Reference to a key in a ConfigMap. Exactly one Secret or ConfigMap has to be specified. For more information, see the external documentation for core/v1 configmapvolumesource.

ConfigMapVolumeSource

name

Name of the volume which will be added to the Kafka Connect pods.

string

secret

Reference to a key in a Secret. Exactly one Secret or ConfigMap has to be specified. For more information, see the external documentation for core/v1 secretvolumesource.

SecretVolumeSource

85. Build schema reference

Used in: KafkaConnectSpec

Full list of Build schema properties

Configures additional connectors for Kafka Connect deployments.

85.1. output

To build new container images with additional connector plugins, Strimzi requires a container registry where the images can be pushed to, stored, and pulled from. Strimzi does not run its own container registry, so a registry must be provided. Strimzi supports private container registries as well as public registries such as Quay or Docker Hub. The container registry is configured in the .spec.build.output section of the KafkaConnect custom resource. The output configuration, which is required, supports two types: docker and imagestream.

Using Docker registry

To use a Docker registry, you have to specify the type as docker, and the image field with the full name of the new container image. The full name must include:

  • The address of the registry

  • Port number (if listening on a non-standard port)

  • The tag of the new container image

Example valid container image names:

  • docker.io/my-org/my-image/my-tag

  • quay.io/my-org/my-image/my-tag

  • image-registry.image-registry.svc:5000/myproject/kafka-connect-build:latest

Each Kafka Connect deployment must use a separate image, which can mean different tags at the most basic level.

If the registry requires authentication, use the pushSecret to set a name of the Secret with the registry credentials. For the Secret, use the kubernetes.io/dockerconfigjson type and a .dockerconfigjson file to contain the Docker credentials. For more information on pulling an image from a private registry, see Create a Secret based on existing Docker credentials.

Example output configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect-cluster
spec:
  #...
  build:
    output:
      type: docker (1)
      image: my-registry.io/my-org/my-connect-cluster:latest (2)
      pushSecret: my-registry-credentials (3)
  #...

  1. (Required) Type of output used by Strimzi.

  2. (Required) Full name of the image used, including the repository and tag.

  3. (Optional) Name of the secret with the container registry credentials.

Using OpenShift ImageStream

Instead of Docker, you can use OpenShift ImageStream to store a new container image. The ImageStream has to be created manually before deploying Kafka Connect. To use ImageStream, set the type to imagestream, and use the image property to specify the name of the ImageStream and the tag used. For example, my-connect-image-stream:latest.

Example output configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect-cluster
spec:
  #...
  build:
    output:
      type: imagestream # (1)
      image: my-connect-build:latest # (2)
  #...

  1. (Required) Type of output used by Strimzi.

  2. (Required) Name of the ImageStream and tag.

85.2. plugins

Connector plugins are a set of files that define the implementation required to connect to certain types of external system. The connector plugins required for a container image must be configured using the .spec.build.plugins property of the KafkaConnect custom resource. Each connector plugin must have a name which is unique within the Kafka Connect deployment. Additionally, the plugin artifacts must be listed. These artifacts are downloaded by Strimzi, added to the new container image, and used in the Kafka Connect deployment. The connector plugin artifacts can also include additional components, such as (de)serializers. Each connector plugin is downloaded into a separate directory so that the different connectors and their dependencies are properly sandboxed. Each plugin must be configured with at least one artifact.

Example plugins configuration with two connector plugins
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect-cluster
spec:
  #...
  build:
    output:
      #...
    plugins: # (1)
      - name: debezium-postgres-connector
        artifacts:
          - type: tgz
            url: https://repo1.maven.org/maven2/io/debezium/debezium-connector-postgres/2.1.3.Final/debezium-connector-postgres-2.1.3.Final-plugin.tar.gz
            sha512sum: c4ddc97846de561755dc0b021a62aba656098829c70eb3ade3b817ce06d852ca12ae50c0281cc791a5a131cb7fc21fb15f4b8ee76c6cae5dd07f9c11cb7c6e79
      - name: camel-telegram
        artifacts:
          - type: tgz
            url: https://repo.maven.apache.org/maven2/org/apache/camel/kafkaconnector/camel-telegram-kafka-connector/0.11.5/camel-telegram-kafka-connector-0.11.5-package.tar.gz
            sha512sum: d6d9f45e0d1dbfcc9f6d1c7ca2046168c764389c78bc4b867dab32d24f710bb74ccf2a007d7d7a8af2dfca09d9a52ccbc2831fc715c195a3634cca055185bd91
  #...

  1. (Required) List of connector plugins and their artifacts.

Strimzi supports the following types of artifacts:

  • JAR files, which are downloaded and used directly

  • TGZ archives, which are downloaded and unpacked

  • ZIP archives, which are downloaded and unpacked

  • Maven artifacts, which uses Maven coordinates

  • Other artifacts, which are downloaded and used directly

Important
 Strimzi does not perform any security scanning of the downloaded artifacts. For security reasons, you should first verify the artifacts manually, and configure the checksum verification to make sure the same artifact is used in the automated build and in the Kafka Connect deployment.
Using JAR artifacts

JAR artifacts represent a JAR file that is downloaded and added to a container image. To use a JAR artifacts, set the type property to jar, and specify the download location using the url property.

Additionally, you can specify a SHA-512 checksum of the artifact. If specified, Strimzi will verify the checksum of the artifact while building the new container image.

Example JAR artifact
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect-cluster
spec:
  #...
  build:
    output:
      #...
    plugins:
      - name: my-plugin
        artifacts:
          - type: jar (1)
            url: https://my-domain.tld/my-jar.jar (2)
            sha512sum: 589...ab4 (3)
          - type: jar
            url: https://my-domain.tld/my-jar2.jar
  #...

  1. (Required) Type of artifact.

  2. (Required) URL from which the artifact is downloaded.

  3. (Optional) SHA-512 checksum to verify the artifact.

Using TGZ artifacts

TGZ artifacts are used to download TAR archives that have been compressed using Gzip compression. The TGZ artifact can contain the whole Kafka Connect connector, even when comprising multiple different files. The TGZ artifact is automatically downloaded and unpacked by Strimzi while building the new container image. To use TGZ artifacts, set the type property to tgz, and specify the download location using the url property.

Additionally, you can specify a SHA-512 checksum of the artifact. If specified, Strimzi will verify the checksum before unpacking it and building the new container image.

Example TGZ artifact
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect-cluster
spec:
  #...
  build:
    output:
      #...
    plugins:
      - name: my-plugin
        artifacts:
          - type: tgz (1)
            url: https://my-domain.tld/my-connector-archive.tgz (2)
            sha512sum: 158...jg10 (3)
  #...

  1. (Required) Type of artifact.

  2. (Required) URL from which the archive is downloaded.

  3. (Optional) SHA-512 checksum to verify the artifact.

Using ZIP artifacts

ZIP artifacts are used to download ZIP compressed archives. Use ZIP artifacts in the same way as the TGZ artifacts described in the previous section. The only difference is you specify type: zip instead of type: tgz.

Using Maven artifacts

maven artifacts are used to specify connector plugin artifacts as Maven coordinates. The Maven coordinates identify plugin artifacts and dependencies so that they can be located and fetched from a Maven repository.

Note
 The Maven repository must be accessible for the connector build process to add the artifacts to the container image.
Example Maven artifact
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect-cluster
spec:
  #...
  build:
    output:
      #...
    plugins:
      - name: my-plugin
        artifacts:
          - type: maven (1)
            repository: https://mvnrepository.com (2)
            group: org.apache.camel.kafkaconnector (3)
            artifact: camel-kafka-connector (4)
            version: 0.11.0 (5)
  #...

  1. (Required) Type of artifact.

  2. (Optional) Maven repository to download the artifacts from. If you do not specify a repository, Maven Central repository is used by default.

  3. (Required) Maven group ID.

  4. (Required) Maven artifact type.

  5. (Required) Maven version number.

Using other artifacts

other artifacts represent any kind of file that is downloaded and added to a container image. If you want to use a specific name for the artifact in the resulting container image, use the fileName field. If a file name is not specified, the file is named based on the URL hash.

Additionally, you can specify a SHA-512 checksum of the artifact. If specified, Strimzi will verify the checksum of the artifact while building the new container image.

Example other artifact
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect-cluster
spec:
  #...
  build:
    output:
      #...
    plugins:
      - name: my-plugin
        artifacts:
          - type: other  (1)
            url: https://my-domain.tld/my-other-file.ext  (2)
            sha512sum: 589...ab4  (3)
            fileName: name-the-file.ext  (4)
  #...

  1. (Required) Type of artifact.

  2. (Required) URL from which the artifact is downloaded.

  3. (Optional) SHA-512 checksum to verify the artifact.

  4. (Optional) The name under which the file is stored in the resulting container image.

85.3. Build schema properties

Property Description

output

Configures where should the newly built image be stored. Required. The type depends on the value of the output.type property within the given object, which must be one of [docker, imagestream].

DockerOutput, ImageStreamOutput

resources

CPU and memory resources to reserve for the build. For more information, see the external documentation for core/v1 resourcerequirements.

ResourceRequirements

plugins

List of connector plugins which should be added to the Kafka Connect. Required.

Plugin array

86. DockerOutput schema reference

Used in: Build

The type property is a discriminator that distinguishes use of the DockerOutput type from ImageStreamOutput. It must have the value docker for the type DockerOutput.

Property Description

image

The full name which should be used for tagging and pushing the newly built image. For example quay.io/my-organization/my-custom-connect:latest. Required.

string

pushSecret

Container Registry Secret with the credentials for pushing the newly built image.

string

additionalKanikoOptions

Configures additional options which will be passed to the Kaniko executor when building the new Connect image. Allowed options are: --customPlatform, --insecure, --insecure-pull, --insecure-registry, --log-format, --log-timestamp, --registry-mirror, --reproducible, --single-snapshot, --skip-tls-verify, --skip-tls-verify-pull, --skip-tls-verify-registry, --verbosity, --snapshotMode, --use-new-run. These options will be used only on Kubernetes where the Kaniko executor is used. They will be ignored on OpenShift. The options are described in the Kaniko GitHub repository. Changing this field does not trigger new build of the Kafka Connect image.

string array

type

Must be docker.

string

87. ImageStreamOutput schema reference

Used in: Build

The type property is a discriminator that distinguishes use of the ImageStreamOutput type from DockerOutput. It must have the value imagestream for the type ImageStreamOutput.

Property Description

image

The name and tag of the ImageStream where the newly built image will be pushed. For example my-custom-connect:latest. Required.

string

type

Must be imagestream.

string

88. Plugin schema reference

Used in: Build

Property Description

name

The unique name of the connector plugin. Will be used to generate the path where the connector artifacts will be stored. The name has to be unique within the KafkaConnect resource. The name has to follow the following pattern: ^[a-z][-_a-z0-9]*[a-z]$. Required.

string

artifacts

List of artifacts which belong to this connector plugin. Required.

JarArtifact, TgzArtifact, ZipArtifact, MavenArtifact, OtherArtifact array

89. JarArtifact schema reference

Used in: Plugin

Property Description

url

URL of the artifact which will be downloaded. Strimzi does not do any security scanning of the downloaded artifacts. For security reasons, you should first verify the artifacts manually and configure the checksum verification to make sure the same artifact is used in the automated build. Required for jar, zip, tgz and other artifacts. Not applicable to the maven artifact type.

string

sha512sum

SHA512 checksum of the artifact. Optional. If specified, the checksum will be verified while building the new container. If not specified, the downloaded artifact will not be verified. Not applicable to the maven artifact type.

string

insecure

By default, connections using TLS are verified to check they are secure. The server certificate used must be valid, trusted, and contain the server name. By setting this option to true, all TLS verification is disabled and the artifact will be downloaded, even when the server is considered insecure.

boolean

type

Must be jar.

string

90. TgzArtifact schema reference

Used in: Plugin

Property Description

url

URL of the artifact which will be downloaded. Strimzi does not do any security scanning of the downloaded artifacts. For security reasons, you should first verify the artifacts manually and configure the checksum verification to make sure the same artifact is used in the automated build. Required for jar, zip, tgz and other artifacts. Not applicable to the maven artifact type.

string

sha512sum

SHA512 checksum of the artifact. Optional. If specified, the checksum will be verified while building the new container. If not specified, the downloaded artifact will not be verified. Not applicable to the maven artifact type.

string

insecure

By default, connections using TLS are verified to check they are secure. The server certificate used must be valid, trusted, and contain the server name. By setting this option to true, all TLS verification is disabled and the artifact will be downloaded, even when the server is considered insecure.

boolean

type

Must be tgz.

string

91. ZipArtifact schema reference

Used in: Plugin

Property Description

url

URL of the artifact which will be downloaded. Strimzi does not do any security scanning of the downloaded artifacts. For security reasons, you should first verify the artifacts manually and configure the checksum verification to make sure the same artifact is used in the automated build. Required for jar, zip, tgz and other artifacts. Not applicable to the maven artifact type.

string

sha512sum

SHA512 checksum of the artifact. Optional. If specified, the checksum will be verified while building the new container. If not specified, the downloaded artifact will not be verified. Not applicable to the maven artifact type.

string

insecure

By default, connections using TLS are verified to check they are secure. The server certificate used must be valid, trusted, and contain the server name. By setting this option to true, all TLS verification is disabled and the artifact will be downloaded, even when the server is considered insecure.

boolean

type

Must be zip.

string

92. MavenArtifact schema reference

Used in: Plugin

The type property is a discriminator that distinguishes use of the MavenArtifact type from JarArtifact, TgzArtifact, ZipArtifact, OtherArtifact. It must have the value maven for the type MavenArtifact.

Property Description

repository

Maven repository to download the artifact from. Applicable to the maven artifact type only.

string

group

Maven group id. Applicable to the maven artifact type only.

string

artifact

Maven artifact id. Applicable to the maven artifact type only.

string

version

Maven version number. Applicable to the maven artifact type only.

string

insecure

By default, connections using TLS are verified to check they are secure. The server certificate used must be valid, trusted, and contain the server name. By setting this option to true, all TLS verification is disabled and the artifacts will be downloaded, even when the server is considered insecure.

boolean

type

Must be maven.

string

93. OtherArtifact schema reference

Used in: Plugin

Property Description

url

URL of the artifact which will be downloaded. Strimzi does not do any security scanning of the downloaded artifacts. For security reasons, you should first verify the artifacts manually and configure the checksum verification to make sure the same artifact is used in the automated build. Required for jar, zip, tgz and other artifacts. Not applicable to the maven artifact type.

string

sha512sum

SHA512 checksum of the artifact. Optional. If specified, the checksum will be verified while building the new container. If not specified, the downloaded artifact will not be verified. Not applicable to the maven artifact type.

string

fileName

Name under which the artifact will be stored.

string

insecure

By default, connections using TLS are verified to check they are secure. The server certificate used must be valid, trusted, and contain the server name. By setting this option to true, all TLS verification is disabled and the artifact will be downloaded, even when the server is considered insecure.

boolean

type

Must be other.

string

94. KafkaConnectStatus schema reference

Used in: KafkaConnect

Property Description

conditions

List of status conditions.

Condition array

observedGeneration

The generation of the CRD that was last reconciled by the operator.

integer

url

The URL of the REST API endpoint for managing and monitoring Kafka Connect connectors.

string

connectorPlugins

The list of connector plugins available in this Kafka Connect deployment.

ConnectorPlugin array

labelSelector

Label selector for pods providing this resource.

string

replicas

The current number of pods being used to provide this resource.

integer

95. ConnectorPlugin schema reference

Used in: KafkaConnectStatus, KafkaMirrorMaker2Status

Property Description

type

The type of the connector plugin. The available types are sink and source.

string

version

The version of the connector plugin.

string

class

The class of the connector plugin.

string

96. KafkaTopic schema reference

Property Description

spec

The specification of the topic.

KafkaTopicSpec

status

The status of the topic.

KafkaTopicStatus

97. KafkaTopicSpec schema reference

Used in: KafkaTopic

Property Description

partitions

The number of partitions the topic should have. This cannot be decreased after topic creation. It can be increased after topic creation, but it is important to understand the consequences that has, especially for topics with semantic partitioning. When absent this will default to the broker configuration for num.partitions.

integer

replicas

The number of replicas the topic should have. When absent this will default to the broker configuration for default.replication.factor.

integer

config

The topic configuration.

map

topicName

The name of the topic. When absent this will default to the metadata.name of the topic. It is recommended to not set this unless the topic name is not a valid Kubernetes resource name.

string

98. KafkaTopicStatus schema reference

Used in: KafkaTopic

Property Description

conditions

List of status conditions.

Condition array

observedGeneration

The generation of the CRD that was last reconciled by the operator.

integer

topicName

Topic name.

string

99. KafkaUser schema reference

Property Description

spec

The specification of the user.

KafkaUserSpec

status

The status of the Kafka User.

KafkaUserStatus

100. KafkaUserSpec schema reference

Used in: KafkaUser

Property Description

authentication

Authentication mechanism enabled for this Kafka user. The supported authentication mechanisms are scram-sha-512, tls, and tls-external.

  • scram-sha-512 generates a secret with SASL SCRAM-SHA-512 credentials.

  • tls generates a secret with user certificate for mutual TLS authentication.

  • tls-external does not generate a user certificate. But prepares the user for using mutual TLS authentication using a user certificate generated outside the User Operator. ACLs and quotas set for this user are configured in the CN=<username> format.

Authentication is optional. If authentication is not configured, no credentials are generated. ACLs and quotas set for the user are configured in the <username> format suitable for SASL authentication. The type depends on the value of the authentication.type property within the given object, which must be one of [tls, tls-external, scram-sha-512].

KafkaUserTlsClientAuthentication, KafkaUserTlsExternalClientAuthentication, KafkaUserScramSha512ClientAuthentication

authorization

Authorization rules for this Kafka user. The type depends on the value of the authorization.type property within the given object, which must be one of [simple].

KafkaUserAuthorizationSimple

quotas

Quotas on requests to control the broker resources used by clients. Network bandwidth and request rate quotas can be enforced.Kafka documentation for Kafka User quotas can be found at http://kafka.apache.org/documentation/#design_quotas.

KafkaUserQuotas

template

Template to specify how Kafka User Secrets are generated.

KafkaUserTemplate

101. KafkaUserTlsClientAuthentication schema reference

Used in: KafkaUserSpec

The type property is a discriminator that distinguishes use of the KafkaUserTlsClientAuthentication type from KafkaUserTlsExternalClientAuthentication, KafkaUserScramSha512ClientAuthentication. It must have the value tls for the type KafkaUserTlsClientAuthentication.

Property Description

type

Must be tls.

string

102. KafkaUserTlsExternalClientAuthentication schema reference

Used in: KafkaUserSpec

The type property is a discriminator that distinguishes use of the KafkaUserTlsExternalClientAuthentication type from KafkaUserTlsClientAuthentication, KafkaUserScramSha512ClientAuthentication. It must have the value tls-external for the type KafkaUserTlsExternalClientAuthentication.

Property Description

type

Must be tls-external.

string

103. KafkaUserScramSha512ClientAuthentication schema reference

Used in: KafkaUserSpec

The type property is a discriminator that distinguishes use of the KafkaUserScramSha512ClientAuthentication type from KafkaUserTlsClientAuthentication, KafkaUserTlsExternalClientAuthentication. It must have the value scram-sha-512 for the type KafkaUserScramSha512ClientAuthentication.

Property Description

password

Specify the password for the user. If not set, a new password is generated by the User Operator.

Password

type

Must be scram-sha-512.

string

104. Password schema reference

Used in: KafkaUserScramSha512ClientAuthentication

Property Description

valueFrom

Secret from which the password should be read.

PasswordSource

105. PasswordSource schema reference

Used in: Password

Property Description

secretKeyRef

Selects a key of a Secret in the resource’s namespace. For more information, see the external documentation for core/v1 secretkeyselector.

SecretKeySelector

106. KafkaUserAuthorizationSimple schema reference

Used in: KafkaUserSpec

The type property is a discriminator that distinguishes use of the KafkaUserAuthorizationSimple type from other subtypes which may be added in the future. It must have the value simple for the type KafkaUserAuthorizationSimple.

Property Description

type

Must be simple.

string

acls

List of ACL rules which should be applied to this user.

AclRule array

107. AclRule schema reference

Used in: KafkaUserAuthorizationSimple

Full list of AclRule schema properties

Configures access control rules for a KafkaUser when brokers are using the AclAuthorizer.

Example KafkaUser configuration with authorization
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaUser
metadata:
  name: my-user
  labels:
    strimzi.io/cluster: my-cluster
spec:
  # ...
  authorization:
    type: simple
    acls:
      - resource:
          type: topic
          name: my-topic
          patternType: literal
        operations:
          - Read
          - Describe
      - resource:
          type: group
          name: my-group
          patternType: prefix
        operations:
          - Read

107.1. resource

Use the resource property to specify the resource that the rule applies to.

Simple authorization supports four resource types, which are specified in the type property:

  • Topics (topic)

  • Consumer Groups (group)

  • Clusters (cluster)

  • Transactional IDs (transactionalId)

For Topic, Group, and Transactional ID resources you can specify the name of the resource the rule applies to in the name property.

Cluster type resources have no name.

A name is specified as a literal or a prefix using the patternType property.

  • Literal names are taken exactly as they are specified in the name field.

  • Prefix names use the name value as a prefix and then apply the rule to all resources with names starting with that value.

When patternType is set as literal, you can set the name to * to indicate that the rule applies to all resources.

Example ACL rule that allows the user to read messages from all topics
    acls:
      - resource:
          type: topic
          name: "*"
          patternType: literal
        operations:
          - Read

107.2. type

The type of rule, which is to allow or deny (not currently supported) an operations.

The type field is optional. If type is unspecified, the ACL rule is treated as an allow rule.

107.3. operations

Specify a list of operations for the rule to allow or deny.

The following operations are supported:

  • Read

  • Write

  • Delete

  • Alter

  • Describe

  • All

  • IdempotentWrite

  • ClusterAction

  • Create

  • AlterConfigs

  • DescribeConfigs

Only certain operations work with each resource.

For more details about AclAuthorizer, ACLs and supported combinations of resources and operations, see Authorization and ACLs.

107.4. host

Use the host property to specify a remote host from which the rule is allowed or denied.

Use an asterisk (*) to allow or deny the operation from all hosts. The host field is optional. If host is unspecified, the * value is used by default.

107.5. AclRule schema properties

Property Description

host

The host from which the action described in the ACL rule is allowed or denied.

string

operation

The operation property has been deprecated, and should now be configured using spec.authorization.acls[*].operations. Operation which will be allowed or denied. Supported operations are: Read, Write, Create, Delete, Alter, Describe, ClusterAction, AlterConfigs, DescribeConfigs, IdempotentWrite and All.

string (one of [Read, Write, Delete, Alter, Describe, All, IdempotentWrite, ClusterAction, Create, AlterConfigs, DescribeConfigs])

operations

List of operations which will be allowed or denied. Supported operations are: Read, Write, Create, Delete, Alter, Describe, ClusterAction, AlterConfigs, DescribeConfigs, IdempotentWrite and All.

string (one or more of [Read, Write, Delete, Alter, Describe, All, IdempotentWrite, ClusterAction, Create, AlterConfigs, DescribeConfigs]) array

resource

Indicates the resource for which given ACL rule applies. The type depends on the value of the resource.type property within the given object, which must be one of [topic, group, cluster, transactionalId].

AclRuleTopicResource, AclRuleGroupResource, AclRuleClusterResource, AclRuleTransactionalIdResource

type

The type of the rule. Currently the only supported type is allow. ACL rules with type allow are used to allow user to execute the specified operations. Default value is allow.

string (one of [allow, deny])

108. AclRuleTopicResource schema reference

Used in: AclRule

The type property is a discriminator that distinguishes use of the AclRuleTopicResource type from AclRuleGroupResource, AclRuleClusterResource, AclRuleTransactionalIdResource. It must have the value topic for the type AclRuleTopicResource.

Property Description

type

Must be topic.

string

name

Name of resource for which given ACL rule applies. Can be combined with patternType field to use prefix pattern.

string

patternType

Describes the pattern used in the resource field. The supported types are literal and prefix. With literal pattern type, the resource field will be used as a definition of a full topic name. With prefix pattern type, the resource name will be used only as a prefix. Default value is literal.

string (one of [prefix, literal])

109. AclRuleGroupResource schema reference

Used in: AclRule

The type property is a discriminator that distinguishes use of the AclRuleGroupResource type from AclRuleTopicResource, AclRuleClusterResource, AclRuleTransactionalIdResource. It must have the value group for the type AclRuleGroupResource.

Property Description

type

Must be group.

string

name

Name of resource for which given ACL rule applies. Can be combined with patternType field to use prefix pattern.

string

patternType

Describes the pattern used in the resource field. The supported types are literal and prefix. With literal pattern type, the resource field will be used as a definition of a full topic name. With prefix pattern type, the resource name will be used only as a prefix. Default value is literal.

string (one of [prefix, literal])

110. AclRuleClusterResource schema reference

Used in: AclRule

The type property is a discriminator that distinguishes use of the AclRuleClusterResource type from AclRuleTopicResource, AclRuleGroupResource, AclRuleTransactionalIdResource. It must have the value cluster for the type AclRuleClusterResource.

Property Description

type

Must be cluster.

string

111. AclRuleTransactionalIdResource schema reference

Used in: AclRule

The type property is a discriminator that distinguishes use of the AclRuleTransactionalIdResource type from AclRuleTopicResource, AclRuleGroupResource, AclRuleClusterResource. It must have the value transactionalId for the type AclRuleTransactionalIdResource.

Property Description

type

Must be transactionalId.

string

name

Name of resource for which given ACL rule applies. Can be combined with patternType field to use prefix pattern.

string

patternType

Describes the pattern used in the resource field. The supported types are literal and prefix. With literal pattern type, the resource field will be used as a definition of a full name. With prefix pattern type, the resource name will be used only as a prefix. Default value is literal.

string (one of [prefix, literal])

112. KafkaUserQuotas schema reference

Used in: KafkaUserSpec

Full list of KafkaUserQuotas schema properties

Kafka allows a user to set quotas to control the use of resources by clients.

112.1. quotas

You can configure your clients to use the following types of quotas:

  • Network usage quotas specify the byte rate threshold for each group of clients sharing a quota.

  • CPU utilization quotas specify a window for broker requests from clients. The window is the percentage of time for clients to make requests. A client makes requests on the I/O threads and network threads of the broker.

  • Partition mutation quotas limit the number of partition mutations which clients are allowed to make per second.

A partition mutation quota prevents Kafka clusters from being overwhelmed by concurrent topic operations. Partition mutations occur in response to the following types of user requests:

  • Creating partitions for a new topic

  • Adding partitions to an existing topic

  • Deleting partitions from a topic

You can configure a partition mutation quota to control the rate at which mutations are accepted for user requests.

Using quotas for Kafka clients might be useful in a number of situations. Consider a wrongly configured Kafka producer which is sending requests at too high a rate. Such misconfiguration can cause a denial of service to other clients, so the problematic client ought to be blocked. By using a network limiting quota, it is possible to prevent this situation from significantly impacting other clients.

Strimzi supports user-level quotas, but not client-level quotas.

Example Kafka user quota configuration
spec:
  quotas:
    producerByteRate: 1048576
    consumerByteRate: 2097152
    requestPercentage: 55
    controllerMutationRate: 10

For more information about Kafka user quotas, refer to the Apache Kafka documentation.

112.2. KafkaUserQuotas schema properties

Property Description

consumerByteRate

A quota on the maximum bytes per-second that each client group can fetch from a broker before the clients in the group are throttled. Defined on a per-broker basis.

integer

controllerMutationRate

A quota on the rate at which mutations are accepted for the create topics request, the create partitions request and the delete topics request. The rate is accumulated by the number of partitions created or deleted.

number

producerByteRate

A quota on the maximum bytes per-second that each client group can publish to a broker before the clients in the group are throttled. Defined on a per-broker basis.

integer

requestPercentage

A quota on the maximum CPU utilization of each client group as a percentage of network and I/O threads.

integer

113. KafkaUserTemplate schema reference

Used in: KafkaUserSpec

Full list of KafkaUserTemplate schema properties

Specify additional labels and annotations for the secret created by the User Operator.

An example showing the KafkaUserTemplate
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaUser
metadata:
  name: my-user
  labels:
    strimzi.io/cluster: my-cluster
spec:
  authentication:
    type: tls
  template:
    secret:
      metadata:
        labels:
          label1: value1
        annotations:
          anno1: value1
  # ...

113.1. KafkaUserTemplate schema properties

Property Description

secret

Template for KafkaUser resources. The template allows users to specify how the Secret with password or TLS certificates is generated.

ResourceTemplate

114. KafkaUserStatus schema reference

Used in: KafkaUser

Property Description

conditions

List of status conditions.

Condition array

observedGeneration

The generation of the CRD that was last reconciled by the operator.

integer

username

Username.

string

secret

The name of Secret where the credentials are stored.

string

115. KafkaMirrorMaker schema reference

The type KafkaMirrorMaker has been deprecated. Please use KafkaMirrorMaker2 instead.

Property Description

spec

The specification of Kafka MirrorMaker.

KafkaMirrorMakerSpec

status

The status of Kafka MirrorMaker.

KafkaMirrorMakerStatus

116. KafkaMirrorMakerSpec schema reference

Used in: KafkaMirrorMaker

Full list of KafkaMirrorMakerSpec schema properties

Configures Kafka MirrorMaker.

116.1. include

Use the include property to configure a list of topics that Kafka MirrorMaker mirrors from the source to the target Kafka cluster.

The property allows any regular expression from the simplest case with a single topic name to complex patterns. For example, you can mirror topics A and B using A|B or all topics using *. You can also pass multiple regular expressions separated by commas to the Kafka MirrorMaker.

116.2. KafkaMirrorMakerConsumerSpec and KafkaMirrorMakerProducerSpec

Use the KafkaMirrorMakerConsumerSpec and KafkaMirrorMakerProducerSpec to configure source (consumer) and target (producer) clusters.

Kafka MirrorMaker always works together with two Kafka clusters (source and target). To establish a connection, the bootstrap servers for the source and the target Kafka clusters are specified as comma-separated lists of HOSTNAME:PORT pairs. Each comma-separated list contains one or more Kafka brokers or a Service pointing to Kafka brokers specified as a HOSTNAME:PORT pair.

116.3. logging

Kafka MirrorMaker has its own configurable logger:

  • mirrormaker.root.logger

MirrorMaker uses the Apache log4j logger implementation.

Use the logging property to configure loggers and logger levels.

You can set the log levels by specifying the logger and level directly (inline) or use a custom (external) ConfigMap. If a ConfigMap is used, you set logging.valueFrom.configMapKeyRef.name property to the name of the ConfigMap containing the external logging configuration. Inside the ConfigMap, the logging configuration is described using log4j.properties. Both logging.valueFrom.configMapKeyRef.name and logging.valueFrom.configMapKeyRef.key properties are mandatory. A ConfigMap using the exact logging configuration specified is created with the custom resource when the Cluster Operator is running, then recreated after each reconciliation. If you do not specify a custom ConfigMap, default logging settings are used. If a specific logger value is not set, upper-level logger settings are inherited for that logger. For more information about log levels, see Apache logging services.

Here we see examples of inline and external logging. The inline logging specifies the root logger level. You can also set log levels for specific classes or loggers by adding them to the loggers property.

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaMirrorMaker
spec:
  # ...
  logging:
    type: inline
    loggers:
      mirrormaker.root.logger: INFO
      log4j.logger.org.apache.kafka.clients.NetworkClient: TRACE
      log4j.logger.org.apache.kafka.common.network.Selector: DEBUG
  # ...
Note
 Setting a log level to DEBUG may result in a large amount of log output and may have performance implications. 
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaMirrorMaker
spec:
  # ...
  logging:
    type: external
    valueFrom:
      configMapKeyRef:
        name: customConfigMap
        key: mirror-maker-log4j.properties
  # ...
Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

116.4. KafkaMirrorMakerSpec schema properties

Property Description

version

The Kafka MirrorMaker version. Defaults to 3.5.0. Consult the documentation to understand the process required to upgrade or downgrade the version.

string

replicas

The number of pods in the Deployment.

integer

image

The docker image for the pods.

string

consumer

Configuration of source cluster.

KafkaMirrorMakerConsumerSpec

producer

Configuration of target cluster.

KafkaMirrorMakerProducerSpec

resources

CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.

ResourceRequirements

whitelist

The whitelist property has been deprecated, and should now be configured using spec.include. List of topics which are included for mirroring. This option allows any regular expression using Java-style regular expressions. Mirroring two topics named A and B is achieved by using the expression A|B. Or, as a special case, you can mirror all topics using the regular expression *. You can also specify multiple regular expressions separated by commas.

string

include

List of topics which are included for mirroring. This option allows any regular expression using Java-style regular expressions. Mirroring two topics named A and B is achieved by using the expression A|B. Or, as a special case, you can mirror all topics using the regular expression *. You can also specify multiple regular expressions separated by commas.

string

jvmOptions

JVM Options for pods.

JvmOptions

logging

Logging configuration for MirrorMaker. The type depends on the value of the logging.type property within the given object, which must be one of [inline, external].

InlineLogging, ExternalLogging

metricsConfig

Metrics configuration. The type depends on the value of the metricsConfig.type property within the given object, which must be one of [jmxPrometheusExporter].

JmxPrometheusExporterMetrics

tracing

The configuration of tracing in Kafka MirrorMaker. The type depends on the value of the tracing.type property within the given object, which must be one of [jaeger, opentelemetry].

JaegerTracing, OpenTelemetryTracing

template

Template to specify how Kafka MirrorMaker resources, Deployments and Pods, are generated.

KafkaMirrorMakerTemplate

livenessProbe

Pod liveness checking.

Probe

readinessProbe

Pod readiness checking.

Probe

117. KafkaMirrorMakerConsumerSpec schema reference

Used in: KafkaMirrorMakerSpec

Full list of KafkaMirrorMakerConsumerSpec schema properties

Configures a MirrorMaker consumer.

117.1. numStreams

Use the consumer.numStreams property to configure the number of streams for the consumer.

You can increase the throughput in mirroring topics by increasing the number of consumer threads. Consumer threads belong to the consumer group specified for Kafka MirrorMaker. Topic partitions are assigned across the consumer threads, which consume messages in parallel.

117.2. offsetCommitInterval

Use the consumer.offsetCommitInterval property to configure an offset auto-commit interval for the consumer.

You can specify the regular time interval at which an offset is committed after Kafka MirrorMaker has consumed data from the source Kafka cluster. The time interval is set in milliseconds, with a default value of 60,000.

117.3. config

Use the consumer.config properties to configure Kafka options for the consumer as keys.

The values can be one of the following JSON types:

  • String

  • Number

  • Boolean

Exceptions

You can specify and configure the options listed in the Apache Kafka configuration documentation for consumers.

However, Strimzi takes care of configuring and managing options related to the following, which cannot be changed:

  • Kafka cluster bootstrap address

  • Security (encryption, authentication, and authorization)

  • Consumer group identifier

  • Interceptors

Properties with the following prefixes cannot be set:

  • bootstrap.servers

  • group.id

  • interceptor.classes

  • sasl.

  • security.

  • ssl.

If the config property contains an option that cannot be changed, it is disregarded, and a warning message is logged to the Cluster Operator log file. All other supported options are forwarded to MirrorMaker, including the following exceptions to the options configured by Strimzi:

Important
 The Cluster Operator does not validate keys or values in the config object provided. If an invalid configuration is provided, the MirrorMaker cluster might not start or might become unstable. In this case, fix the configuration so that the Cluster Operator can roll out the new configuration to all MirrorMaker nodes.

117.4. groupId

Use the consumer.groupId property to configure a consumer group identifier for the consumer.

Kafka MirrorMaker uses a Kafka consumer to consume messages, behaving like any other Kafka consumer client. Messages consumed from the source Kafka cluster are mirrored to a target Kafka cluster. A group identifier is required, as the consumer needs to be part of a consumer group for the assignment of partitions.

117.5. KafkaMirrorMakerConsumerSpec schema properties

Property Description

numStreams

Specifies the number of consumer stream threads to create.

integer

offsetCommitInterval

Specifies the offset auto-commit interval in ms. Default value is 60000.

integer

bootstrapServers

A list of host:port pairs for establishing the initial connection to the Kafka cluster.

string

groupId

A unique string that identifies the consumer group this consumer belongs to.

string

authentication

Authentication configuration for connecting to the cluster. The type depends on the value of the authentication.type property within the given object, which must be one of [tls, scram-sha-256, scram-sha-512, plain, oauth].

KafkaClientAuthenticationTls, KafkaClientAuthenticationScramSha256, KafkaClientAuthenticationScramSha512, KafkaClientAuthenticationPlain, KafkaClientAuthenticationOAuth

config

The MirrorMaker consumer config. Properties with the following prefixes cannot be set: ssl., bootstrap.servers, group.id, sasl., security., interceptor.classes (with the exception of: ssl.endpoint.identification.algorithm, ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols).

map

tls

TLS configuration for connecting MirrorMaker to the cluster.

ClientTls

118. KafkaMirrorMakerProducerSpec schema reference

Used in: KafkaMirrorMakerSpec

Full list of KafkaMirrorMakerProducerSpec schema properties

Configures a MirrorMaker producer.

118.1. abortOnSendFailure

Use the producer.abortOnSendFailure property to configure how to handle message send failure from the producer.

By default, if an error occurs when sending a message from Kafka MirrorMaker to a Kafka cluster:

  • The Kafka MirrorMaker container is terminated in Kubernetes.

  • The container is then recreated.

If the abortOnSendFailure option is set to false, message sending errors are ignored.

118.2. config

Use the producer.config properties to configure Kafka options for the producer as keys.

The values can be one of the following JSON types:

  • String

  • Number

  • Boolean

Exceptions

You can specify and configure the options listed in the Apache Kafka configuration documentation for producers.

However, Strimzi takes care of configuring and managing options related to the following, which cannot be changed:

  • Kafka cluster bootstrap address

  • Security (encryption, authentication, and authorization)

  • Interceptors

Properties with the following prefixes cannot be set:

  • bootstrap.servers

  • interceptor.classes

  • sasl.

  • security.

  • ssl.

If the config property contains an option that cannot be changed, it is disregarded, and a warning message is logged to the Cluster Operator log file. All other supported options are forwarded to MirrorMaker, including the following exceptions to the options configured by Strimzi:

Important
 The Cluster Operator does not validate keys or values in the config object provided. If an invalid configuration is provided, the MirrorMaker cluster might not start or might become unstable. In this case, fix the configuration so that the Cluster Operator can roll out the new configuration to all MirrorMaker nodes.

118.3. KafkaMirrorMakerProducerSpec schema properties

Property Description

bootstrapServers

A list of host:port pairs for establishing the initial connection to the Kafka cluster.

string

abortOnSendFailure

Flag to set the MirrorMaker to exit on a failed send. Default value is true.

boolean

authentication

Authentication configuration for connecting to the cluster. The type depends on the value of the authentication.type property within the given object, which must be one of [tls, scram-sha-256, scram-sha-512, plain, oauth].

KafkaClientAuthenticationTls, KafkaClientAuthenticationScramSha256, KafkaClientAuthenticationScramSha512, KafkaClientAuthenticationPlain, KafkaClientAuthenticationOAuth

config

The MirrorMaker producer config. Properties with the following prefixes cannot be set: ssl., bootstrap.servers, sasl., security., interceptor.classes (with the exception of: ssl.endpoint.identification.algorithm, ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols).

map

tls

TLS configuration for connecting MirrorMaker to the cluster.

ClientTls

119. KafkaMirrorMakerTemplate schema reference

Used in: KafkaMirrorMakerSpec

Property Description

deployment

Template for Kafka MirrorMaker Deployment.

DeploymentTemplate

pod

Template for Kafka MirrorMaker Pods.

PodTemplate

podDisruptionBudget

Template for Kafka MirrorMaker PodDisruptionBudget.

PodDisruptionBudgetTemplate

mirrorMakerContainer

Template for Kafka MirrorMaker container.

ContainerTemplate

serviceAccount

Template for the Kafka MirrorMaker service account.

ResourceTemplate

120. KafkaMirrorMakerStatus schema reference

Used in: KafkaMirrorMaker

Property Description

conditions

List of status conditions.

Condition array

observedGeneration

The generation of the CRD that was last reconciled by the operator.

integer

labelSelector

Label selector for pods providing this resource.

string

replicas

The current number of pods being used to provide this resource.

integer

121. KafkaBridge schema reference

Property Description

spec

The specification of the Kafka Bridge.

KafkaBridgeSpec

status

The status of the Kafka Bridge.

KafkaBridgeStatus

122. KafkaBridgeSpec schema reference

Used in: KafkaBridge

Full list of KafkaBridgeSpec schema properties

Configures a Kafka Bridge cluster.

Configuration options relate to:

  • Kafka cluster bootstrap address

  • Security (encryption, authentication, and authorization)

  • Consumer configuration

  • Producer configuration

  • HTTP configuration

122.1. logging

Kafka Bridge has its own configurable loggers:

  • rootLogger.level

  • logger.<operation-id>

You can replace <operation-id> in the logger.<operation-id> logger to set log levels for specific operations:

  • createConsumer

  • deleteConsumer

  • subscribe

  • unsubscribe

  • poll

  • assign

  • commit

  • send

  • sendToPartition

  • seekToBeginning

  • seekToEnd

  • seek

  • healthy

  • ready

  • openapi

Each operation is defined according OpenAPI specification, and has a corresponding API endpoint through which the bridge receives requests from HTTP clients. You can change the log level on each endpoint to create fine-grained logging information about the incoming and outgoing HTTP requests.

Each logger has to be configured assigning it a name as http.openapi.operation.<operation-id>. For example, configuring the logging level for the send operation logger means defining the following:

logger.send.name = http.openapi.operation.send
logger.send.level = DEBUG

Kafka Bridge uses the Apache log4j2 logger implementation. Loggers are defined in the log4j2.properties file, which has the following default configuration for healthy and ready endpoints:

logger.healthy.name = http.openapi.operation.healthy
logger.healthy.level = WARN
logger.ready.name = http.openapi.operation.ready
logger.ready.level = WARN

The log level of all other operations is set to INFO by default.

Use the logging property to configure loggers and logger levels.

You can set the log levels by specifying the logger and level directly (inline) or use a custom (external) ConfigMap. If a ConfigMap is used, you set logging.valueFrom.configMapKeyRef.name property to the name of the ConfigMap containing the external logging configuration. The logging.valueFrom.configMapKeyRef.name and logging.valueFrom.configMapKeyRef.key properties are mandatory. Default logging is used if the name or key is not set. Inside the ConfigMap, the logging configuration is described using log4j.properties. For more information about log levels, see Apache logging services.

Here we see examples of inline and external logging.

Inline logging
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaBridge
spec:
  # ...
  logging:
    type: inline
    loggers:
      rootLogger.level: INFO
      # enabling DEBUG just for send operation
      logger.send.name: "http.openapi.operation.send"
      logger.send.level: DEBUG
  # ...
External logging
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaBridge
spec:
  # ...
  logging:
    type: external
    valueFrom:
      configMapKeyRef:
        name: customConfigMap
        key: bridge-logj42.properties
  # ...

Any available loggers that are not configured have their level set to OFF.

If the Kafka Bridge was deployed using the Cluster Operator, changes to Kafka Bridge logging levels are applied dynamically.

If you use external logging, a rolling update is triggered when logging appenders are changed.

Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

122.2. KafkaBridgeSpec schema properties

Property Description

replicas

The number of pods in the Deployment. Defaults to 1.

integer

image

The docker image for the pods.

string

bootstrapServers

A list of host:port pairs for establishing the initial connection to the Kafka cluster.

string

tls

TLS configuration for connecting Kafka Bridge to the cluster.

ClientTls

authentication

Authentication configuration for connecting to the cluster. The type depends on the value of the authentication.type property within the given object, which must be one of [tls, scram-sha-256, scram-sha-512, plain, oauth].

KafkaClientAuthenticationTls, KafkaClientAuthenticationScramSha256, KafkaClientAuthenticationScramSha512, KafkaClientAuthenticationPlain, KafkaClientAuthenticationOAuth

http

The HTTP related configuration.

KafkaBridgeHttpConfig

adminClient

Kafka AdminClient related configuration.

KafkaBridgeAdminClientSpec

consumer

Kafka consumer related configuration.

KafkaBridgeConsumerSpec

producer

Kafka producer related configuration.

KafkaBridgeProducerSpec

resources

CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.

ResourceRequirements

jvmOptions

Currently not supported JVM Options for pods.

JvmOptions

logging

Logging configuration for Kafka Bridge. The type depends on the value of the logging.type property within the given object, which must be one of [inline, external].

InlineLogging, ExternalLogging

clientRackInitImage

The image of the init container used for initializing the client.rack.

string

rack

Configuration of the node label which will be used as the client.rack consumer configuration.

Rack

enableMetrics

Enable the metrics for the Kafka Bridge. Default is false.

boolean

livenessProbe

Pod liveness checking.

Probe

readinessProbe

Pod readiness checking.

Probe

template

Template for Kafka Bridge resources. The template allows users to specify how a Deployment and Pod is generated.

KafkaBridgeTemplate

tracing

The configuration of tracing in Kafka Bridge. The type depends on the value of the tracing.type property within the given object, which must be one of [jaeger, opentelemetry].

JaegerTracing, OpenTelemetryTracing

123. KafkaBridgeHttpConfig schema reference

Used in: KafkaBridgeSpec

Full list of KafkaBridgeHttpConfig schema properties

Configures HTTP access to a Kafka cluster for the Kafka Bridge.

The default HTTP configuration is for the Kafka Bridge to listen on port 8080.

123.1. cors

As well as enabling HTTP access to a Kafka cluster, HTTP properties provide the capability to enable and define access control for the Kafka Bridge through Cross-Origin Resource Sharing (CORS). CORS is a HTTP mechanism that allows browser access to selected resources from more than one origin. To configure CORS, you define a list of allowed resource origins and HTTP access methods. For the origins, you can use a URL or a Java regular expression.

Example Kafka Bridge HTTP configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaBridge
metadata:
  name: my-bridge
spec:
  # ...
  http:
    port: 8080
    cors:
      allowedOrigins: "https://strimzi.io"
      allowedMethods: "GET,POST,PUT,DELETE,OPTIONS,PATCH"
  # ...

123.2. KafkaBridgeHttpConfig schema properties

Property Description

port

The port which is the server listening on.

integer

cors

CORS configuration for the HTTP Bridge.

KafkaBridgeHttpCors

124. KafkaBridgeHttpCors schema reference

Used in: KafkaBridgeHttpConfig

Property Description

allowedOrigins

List of allowed origins. Java regular expressions can be used.

string array

allowedMethods

List of allowed HTTP methods.

string array

125. KafkaBridgeAdminClientSpec schema reference

Used in: KafkaBridgeSpec

Property Description

config

The Kafka AdminClient configuration used for AdminClient instances created by the bridge.

map

126. KafkaBridgeConsumerSpec schema reference

Used in: KafkaBridgeSpec

Full list of KafkaBridgeConsumerSpec schema properties

Configures consumer options for the Kafka Bridge as keys.

The values can be one of the following JSON types:

  • String

  • Number

  • Boolean

Exceptions

You can specify and configure the options listed in the Apache Kafka configuration documentation for consumers.

However, Strimzi takes care of configuring and managing options related to the following, which cannot be changed:

  • Kafka cluster bootstrap address

  • Security (encryption, authentication, and authorization)

  • Consumer group identifier

Properties with the following prefixes cannot be set:

  • bootstrap.servers

  • group.id

  • sasl.

  • security.

  • ssl.

If the config property contains an option that cannot be changed, it is disregarded, and a warning message is logged to the Cluster Operator log file. All other supported options are forwarded to Kafka Bridge, including the following exceptions to the options configured by Strimzi:

Example Kafka Bridge consumer configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaBridge
metadata:
  name: my-bridge
spec:
  # ...
  consumer:
    config:
      auto.offset.reset: earliest
      enable.auto.commit: true
    # ...
Important
 The Cluster Operator does not validate keys or values in the config object. If an invalid configuration is provided, the Kafka Bridge deployment might not start or might become unstable. In this case, fix the configuration so that the Cluster Operator can roll out the new configuration to all Kafka Bridge nodes.

126.1. KafkaBridgeConsumerSpec schema properties

Property Description

config

The Kafka consumer configuration used for consumer instances created by the bridge. Properties with the following prefixes cannot be set: ssl., bootstrap.servers, group.id, sasl., security. (with the exception of: ssl.endpoint.identification.algorithm, ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols).

map

127. KafkaBridgeProducerSpec schema reference

Used in: KafkaBridgeSpec

Full list of KafkaBridgeProducerSpec schema properties

Configures producer options for the Kafka Bridge as keys.

The values can be one of the following JSON types:

  • String

  • Number

  • Boolean

Exceptions

You can specify and configure the options listed in the Apache Kafka configuration documentation for producers.

However, Strimzi takes care of configuring and managing options related to the following, which cannot be changed:

  • Kafka cluster bootstrap address

  • Security (encryption, authentication, and authorization)

  • Consumer group identifier

Properties with the following prefixes cannot be set:

  • bootstrap.servers

  • sasl.

  • security.

  • ssl.

If the config property contains an option that cannot be changed, it is disregarded, and a warning message is logged to the Cluster Operator log file. All other supported options are forwarded to Kafka Bridge, including the following exceptions to the options configured by Strimzi:

Example Kafka Bridge producer configuration
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaBridge
metadata:
  name: my-bridge
spec:
  # ...
  producer:
    config:
      acks: 1
      delivery.timeout.ms: 300000
    # ...
Important
 The Cluster Operator does not validate keys or values in the config object. If an invalid configuration is provided, the Kafka Bridge deployment might not start or might become unstable. In this case, fix the configuration so that the Cluster Operator can roll out the new configuration to all Kafka Bridge nodes.

127.1. KafkaBridgeProducerSpec schema properties

Property Description

config

The Kafka producer configuration used for producer instances created by the bridge. Properties with the following prefixes cannot be set: ssl., bootstrap.servers, sasl., security. (with the exception of: ssl.endpoint.identification.algorithm, ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols).

map

128. KafkaBridgeTemplate schema reference

Used in: KafkaBridgeSpec

Property Description

deployment

Template for Kafka Bridge Deployment.

DeploymentTemplate

pod

Template for Kafka Bridge Pods.

PodTemplate

apiService

Template for Kafka Bridge API Service.

InternalServiceTemplate

podDisruptionBudget

Template for Kafka Bridge PodDisruptionBudget.

PodDisruptionBudgetTemplate

bridgeContainer

Template for the Kafka Bridge container.

ContainerTemplate

clusterRoleBinding

Template for the Kafka Bridge ClusterRoleBinding.

ResourceTemplate

serviceAccount

Template for the Kafka Bridge service account.

ResourceTemplate

initContainer

Template for the Kafka Bridge init container.

ContainerTemplate

129. KafkaBridgeStatus schema reference

Used in: KafkaBridge

Property Description

conditions

List of status conditions.

Condition array

observedGeneration

The generation of the CRD that was last reconciled by the operator.

integer

url

The URL at which external client applications can access the Kafka Bridge.

string

labelSelector

Label selector for pods providing this resource.

string

replicas

The current number of pods being used to provide this resource.

integer

130. KafkaConnector schema reference

Property Description

spec

The specification of the Kafka Connector.

KafkaConnectorSpec

status

The status of the Kafka Connector.

KafkaConnectorStatus

131. KafkaConnectorSpec schema reference

Used in: KafkaConnector

Property Description

class

The Class for the Kafka Connector.

string

tasksMax

The maximum number of tasks for the Kafka Connector.

integer

autoRestart

Automatic restart of connector and tasks configuration.

AutoRestart

config

The Kafka Connector configuration. The following properties cannot be set: connector.class, tasks.max.

map

pause

Whether the connector should be paused. Defaults to false.

boolean

132. AutoRestart schema reference

Used in: KafkaConnectorSpec, KafkaMirrorMaker2ConnectorSpec

Full list of AutoRestart schema properties

Configures automatic restarts for connectors and tasks that are in a FAILED state.

When enabled, a back-off algorithm applies the automatic restart to each failed connector and its tasks.

The operator attempts an automatic restart on reconciliation. If the first attempt fails, the operator makes up to six more attempts. The duration between each restart attempt increases from 2 to 30 minutes. After each restart, failed connectors and tasks transit from FAILED to RESTARTING. If the restart fails after the final attempt, there is likely to be a problem with the connector configuration. The connector and tasks remain in a FAILED state and you have to restart them manually. You can do this by annotating the KafKaConnector custom resource with strimzi.io/restart: "true".

For Kafka Connect connectors, use the autoRestart property of the KafkaConnector resource to enable automatic restarts of failed connectors and tasks.

Enabling automatic restarts of failed connectors for Kafka Connect
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnector
metadata:
  name: my-source-connector
spec:
  autoRestart:
    enabled: true

For MirrorMaker 2, use the autoRestart property of connectors in the KafkaMirrorMaker2 resource to enable automatic restarts of failed connectors and tasks.

Enabling automatic restarts of failed connectors for MirrorMaker 2
apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaMirrorMaker2
metadata:
  name: my-mm2-cluster
spec:
  mirrors:
  - sourceConnector:
      autoRestart:
        enabled: true
      # ...
    heartbeatConnector:
      autoRestart:
        enabled: true
      # ...
    checkpointConnector:
      autoRestart:
        enabled: true
      # ...

132.1. AutoRestart schema properties

Property Description

enabled

Whether automatic restart for failed connectors and tasks should be enabled or disabled.

boolean

133. KafkaConnectorStatus schema reference

Used in: KafkaConnector

Property Description

conditions

List of status conditions.

Condition array

observedGeneration

The generation of the CRD that was last reconciled by the operator.

integer

autoRestart

The auto restart status.

AutoRestartStatus

connectorStatus

The connector status, as reported by the Kafka Connect REST API.

map

tasksMax

The maximum number of tasks for the Kafka Connector.

integer

topics

The list of topics used by the Kafka Connector.

string array

134. AutoRestartStatus schema reference

Used in: KafkaConnectorStatus, KafkaMirrorMaker2Status

Property Description

count

The number of times the connector or task is restarted.

integer

connectorName

The name of the connector being restarted.

string

lastRestartTimestamp

The last time the automatic restart was attempted. The required format is 'yyyy-MM-ddTHH:mm:ssZ' in the UTC time zone.

string

135. KafkaMirrorMaker2 schema reference

Property Description

spec

The specification of the Kafka MirrorMaker 2 cluster.

KafkaMirrorMaker2Spec

status

The status of the Kafka MirrorMaker 2 cluster.

KafkaMirrorMaker2Status

136. KafkaMirrorMaker2Spec schema reference

Used in: KafkaMirrorMaker2

Property Description

version

The Kafka Connect version. Defaults to 3.5.0. Consult the user documentation to understand the process required to upgrade or downgrade the version.

string

replicas

The number of pods in the Kafka Connect group. Defaults to 3.

integer

image

The docker image for the pods.

string

connectCluster

The cluster alias used for Kafka Connect. The alias must match a cluster in the list at spec.clusters.

string

clusters

Kafka clusters for mirroring.

KafkaMirrorMaker2ClusterSpec array

mirrors

Configuration of the MirrorMaker 2 connectors.

KafkaMirrorMaker2MirrorSpec array

resources

The maximum limits for CPU and memory resources and the requested initial resources. For more information, see the external documentation for core/v1 resourcerequirements.

ResourceRequirements

livenessProbe

Pod liveness checking.

Probe

readinessProbe

Pod readiness checking.

Probe

jvmOptions

JVM Options for pods.

JvmOptions

jmxOptions

JMX Options.

KafkaJmxOptions

logging

Logging configuration for Kafka Connect. The type depends on the value of the logging.type property within the given object, which must be one of [inline, external].

InlineLogging, ExternalLogging

clientRackInitImage

The image of the init container used for initializing the client.rack.

string

rack

Configuration of the node label which will be used as the client.rack consumer configuration.

Rack

tracing

The configuration of tracing in Kafka Connect. The type depends on the value of the tracing.type property within the given object, which must be one of [jaeger, opentelemetry].

JaegerTracing, OpenTelemetryTracing

template

Template for Kafka Connect and Kafka Mirror Maker 2 resources. The template allows users to specify how the Deployment, Pods and Service are generated.

KafkaConnectTemplate

externalConfiguration

Pass data from Secrets or ConfigMaps to the Kafka Connect pods and use them to configure connectors.

ExternalConfiguration

metricsConfig

Metrics configuration. The type depends on the value of the metricsConfig.type property within the given object, which must be one of [jmxPrometheusExporter].

JmxPrometheusExporterMetrics

137. KafkaMirrorMaker2ClusterSpec schema reference

Used in: KafkaMirrorMaker2Spec

Full list of KafkaMirrorMaker2ClusterSpec schema properties

Configures Kafka clusters for mirroring.

137.1. config

Use the config properties to configure Kafka options.

Standard Apache Kafka configuration may be provided, restricted to those properties not managed directly by Strimzi.

For client connection using a specific cipher suite for a TLS version, you can configure allowed ssl properties. You can also configure the ssl.endpoint.identification.algorithm property to enable or disable hostname verification.

137.2. KafkaMirrorMaker2ClusterSpec schema properties

Property Description

alias

Alias used to reference the Kafka cluster.

string

bootstrapServers

A comma-separated list of host:port pairs for establishing the connection to the Kafka cluster.

string

tls

TLS configuration for connecting MirrorMaker 2 connectors to a cluster.

ClientTls

authentication

Authentication configuration for connecting to the cluster. The type depends on the value of the authentication.type property within the given object, which must be one of [tls, scram-sha-256, scram-sha-512, plain, oauth].

KafkaClientAuthenticationTls, KafkaClientAuthenticationScramSha256, KafkaClientAuthenticationScramSha512, KafkaClientAuthenticationPlain, KafkaClientAuthenticationOAuth

config

The MirrorMaker 2 cluster config. Properties with the following prefixes cannot be set: ssl., sasl., security., listeners, plugin.path, rest., bootstrap.servers, consumer.interceptor.classes, producer.interceptor.classes (with the exception of: ssl.endpoint.identification.algorithm, ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols).

map

138. KafkaMirrorMaker2MirrorSpec schema reference

Used in: KafkaMirrorMaker2Spec

Property Description

sourceCluster

The alias of the source cluster used by the Kafka MirrorMaker 2 connectors. The alias must match a cluster in the list at spec.clusters.

string

targetCluster

The alias of the target cluster used by the Kafka MirrorMaker 2 connectors. The alias must match a cluster in the list at spec.clusters.

string

sourceConnector

The specification of the Kafka MirrorMaker 2 source connector.

KafkaMirrorMaker2ConnectorSpec

heartbeatConnector

The specification of the Kafka MirrorMaker 2 heartbeat connector.

KafkaMirrorMaker2ConnectorSpec

checkpointConnector

The specification of the Kafka MirrorMaker 2 checkpoint connector.

KafkaMirrorMaker2ConnectorSpec

topicsPattern

A regular expression matching the topics to be mirrored, for example, "topic1|topic2|topic3". Comma-separated lists are also supported.

string

topicsBlacklistPattern

The topicsBlacklistPattern property has been deprecated, and should now be configured using .spec.mirrors.topicsExcludePattern. A regular expression matching the topics to exclude from mirroring. Comma-separated lists are also supported.

string

topicsExcludePattern

A regular expression matching the topics to exclude from mirroring. Comma-separated lists are also supported.

string

groupsPattern

A regular expression matching the consumer groups to be mirrored. Comma-separated lists are also supported.

string

groupsBlacklistPattern

The groupsBlacklistPattern property has been deprecated, and should now be configured using .spec.mirrors.groupsExcludePattern. A regular expression matching the consumer groups to exclude from mirroring. Comma-separated lists are also supported.

string

groupsExcludePattern

A regular expression matching the consumer groups to exclude from mirroring. Comma-separated lists are also supported.

string

139. KafkaMirrorMaker2ConnectorSpec schema reference

Used in: KafkaMirrorMaker2MirrorSpec

Property Description

tasksMax

The maximum number of tasks for the Kafka Connector.

integer

config

The Kafka Connector configuration. The following properties cannot be set: connector.class, tasks.max.

map

autoRestart

Automatic restart of connector and tasks configuration.

AutoRestart

pause

Whether the connector should be paused. Defaults to false.

boolean

140. KafkaMirrorMaker2Status schema reference

Used in: KafkaMirrorMaker2

Property Description

conditions

List of status conditions.

Condition array

observedGeneration

The generation of the CRD that was last reconciled by the operator.

integer

url

The URL of the REST API endpoint for managing and monitoring Kafka Connect connectors.

string

autoRestartStatuses

List of MirrorMaker 2 connector auto restart statuses.

AutoRestartStatus array

connectorPlugins

The list of connector plugins available in this Kafka Connect deployment.

ConnectorPlugin array

connectors

List of MirrorMaker 2 connector statuses, as reported by the Kafka Connect REST API.

map array

labelSelector

Label selector for pods providing this resource.

string

replicas

The current number of pods being used to provide this resource.

integer

141. KafkaRebalance schema reference

Property Description

spec

The specification of the Kafka rebalance.

KafkaRebalanceSpec

status

The status of the Kafka rebalance.

KafkaRebalanceStatus

142. KafkaRebalanceSpec schema reference

Used in: KafkaRebalance

Property Description

mode

Mode to run the rebalancing. The supported modes are full, add-brokers, remove-brokers. If not specified, the full mode is used by default.

  • full mode runs the rebalancing across all the brokers in the cluster.

  • add-brokers mode can be used after scaling up the cluster to move some replicas to the newly added brokers.

  • remove-brokers mode can be used before scaling down the cluster to move replicas out of the brokers to be removed.

string (one of [remove-brokers, full, add-brokers])

brokers

The list of newly added brokers in case of scaling up or the ones to be removed in case of scaling down to use for rebalancing. This list can be used only with rebalancing mode add-brokers and removed-brokers. It is ignored with full mode.

integer array

goals

A list of goals, ordered by decreasing priority, to use for generating and executing the rebalance proposal. The supported goals are available at https://github.com/linkedin/cruise-control#goals. If an empty goals list is provided, the goals declared in the default.goals Cruise Control configuration parameter are used.

string array

skipHardGoalCheck

Whether to allow the hard goals specified in the Kafka CR to be skipped in optimization proposal generation. This can be useful when some of those hard goals are preventing a balance solution being found. Default is false.

boolean

rebalanceDisk

Enables intra-broker disk balancing, which balances disk space utilization between disks on the same broker. Only applies to Kafka deployments that use JBOD storage with multiple disks. When enabled, inter-broker balancing is disabled. Default is false.

boolean

excludedTopics

A regular expression where any matching topics will be excluded from the calculation of optimization proposals. This expression will be parsed by the java.util.regex.Pattern class; for more information on the supported format consult the documentation for that class.

string

concurrentPartitionMovementsPerBroker

The upper bound of ongoing partition replica movements going into/out of each broker. Default is 5.

integer

concurrentIntraBrokerPartitionMovements

The upper bound of ongoing partition replica movements between disks within each broker. Default is 2.

integer

concurrentLeaderMovements

The upper bound of ongoing partition leadership movements. Default is 1000.

integer

replicationThrottle

The upper bound, in bytes per second, on the bandwidth used to move replicas. There is no limit by default.

integer

replicaMovementStrategies

A list of strategy class names used to determine the execution order for the replica movements in the generated optimization proposal. By default BaseReplicaMovementStrategy is used, which will execute the replica movements in the order that they were generated.

string array

143. KafkaRebalanceStatus schema reference

Used in: KafkaRebalance

Property Description

conditions

List of status conditions.

Condition array

observedGeneration

The generation of the CRD that was last reconciled by the operator.

integer

sessionId

The session identifier for requests to Cruise Control pertaining to this KafkaRebalance resource. This is used by the Kafka Rebalance operator to track the status of ongoing rebalancing operations.

string

optimizationResult

A JSON object describing the optimization result.

map

144. KafkaNodePool schema reference

Property Description

spec

The specification of the KafkaNodePool.

KafkaNodePoolSpec

status

The status of the KafkaNodePool.

KafkaNodePoolStatus

145. KafkaNodePoolSpec schema reference

Used in: KafkaNodePool

Property Description

replicas

The number of pods in the pool.

integer

storage

Storage configuration (disk). Cannot be updated. The type depends on the value of the storage.type property within the given object, which must be one of [ephemeral, persistent-claim, jbod].

EphemeralStorage, PersistentClaimStorage, JbodStorage

roles

The roles that the nodes in this pool will have when KRaft mode is enabled. Supported values are 'broker' and 'controller'. This field is required. When KRaft mode is disabled, the only allowed value if broker.

string (one or more of [controller, broker]) array

resources

CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.

ResourceRequirements

jvmOptions

JVM Options for pods.

JvmOptions

template

Template for pool resources. The template allows users to specify how the resources belonging to this pool are generated.

KafkaNodePoolTemplate

146. KafkaNodePoolTemplate schema reference

Used in: KafkaNodePoolSpec

Property Description

podSet

Template for Kafka StrimziPodSet resource.

ResourceTemplate

pod

Template for Kafka Pods.

PodTemplate

perPodService

Template for Kafka per-pod Services used for access from outside of Kubernetes.

ResourceTemplate

perPodRoute

Template for Kafka per-pod Routes used for access from outside of OpenShift.

ResourceTemplate

perPodIngress

Template for Kafka per-pod Ingress used for access from outside of Kubernetes.

ResourceTemplate

persistentVolumeClaim

Template for all Kafka PersistentVolumeClaims.

ResourceTemplate

kafkaContainer

Template for the Kafka broker container.

ContainerTemplate

initContainer

Template for the Kafka init container.

ContainerTemplate

147. KafkaNodePoolStatus schema reference

Used in: KafkaNodePool

Property Description

conditions

List of status conditions.

Condition array

observedGeneration

The generation of the CRD that was last reconciled by the operator.

integer

nodeIds

Node IDs used by Kafka nodes in this pool.

integer array

clusterId

Kafka cluster ID.

string

replicas

The current number of pods being used to provide this resource.

integer

labelSelector

Label selector for pods providing this resource.

string

148. StrimziPodSet schema reference

Full list of StrimziPodSet schema properties

Important
 StrimziPodSet is an internal Strimzi resource. Information is provided for reference only. Do not create, modify or delete StrimziPodSet resources as this might cause errors.

148.1. StrimziPodSet schema properties

Property Description

spec

The specification of the StrimziPodSet.

StrimziPodSetSpec

status

The status of the StrimziPodSet.

StrimziPodSetStatus

149. StrimziPodSetSpec schema reference

Used in: StrimziPodSet

Property Description

selector

Selector is a label query which matches all the pods managed by this StrimziPodSet. Only matchLabels is supported. If matchExpressions is set, it will be ignored. For more information, see the external documentation for meta/v1 labelselector.

LabelSelector

pods

The Pods managed by this StrimziPodSet. For more information, see the external documentation for core/v1 pods.

Map array

150. StrimziPodSetStatus schema reference

Used in: StrimziPodSet

Property Description

conditions

List of status conditions.

Condition array

observedGeneration

The generation of the CRD that was last reconciled by the operator.

integer

pods

Number of pods managed by this StrimziPodSet resource.

integer

readyPods

Number of pods managed by this StrimziPodSet resource that are ready.

integer

currentPods

Number of pods managed by this StrimziPodSet resource that have the current revision.

integer